Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 Do you have any idea on how to fix wifi?
Guest akira.pwr Posted October 24, 2010 Report Posted October 24, 2010 ah ok, we got it "IT'S JUST A JEARSY THING" Life-time ban for Andrea1Liquid!!!! Stop fight pls...
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 (edited) Stop fight pls... Right. Why a person have to reopen a fight that was already closed? Anyways, maybe I understood how to enable wifi: the trick is in dhcpcd... I think :D Edit: Yeah! Light sensor working! Edit 2: GSensors working! Edit 3: USB Tethering working, unfortunately no data to tether yet :D Edit 4: there are serious problems with the usb port: it's recognized only as a power supplier. No other modalities...so neither usb teth... Edit 5: seems it can't load the wifi driver...wtf? :P Edited October 24, 2010 by Andrea1Liquid
Guest akira.pwr Posted October 24, 2010 Report Posted October 24, 2010 (edited) Did you worked all night long? Edited October 24, 2010 by akira.pwr
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 (edited) Yes, until 00:30 (half-an-hour for testing on the bed :P)...Btw, the ROM has a good power compsumption (like froyo leaks), but I'm waiting for final conclusions to enable all the hw (maybe it uses less battery because almost everything doesn't work :D ahah). Edited October 24, 2010 by Andrea1Liquid
Guest koudelka Posted October 24, 2010 Report Posted October 24, 2010 Edit: Yeah! Light sensor working! Edit 5: seems it can't load the wifi driver...wtf? :P Light sensor is working in the rom to change brightness??? or just in sensor testing applications? you got BCM4325.bin in right place and nvram.txt, wpa_supplicant.conf?
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 (edited) Light sensor is working in the rom to change brightness??? or just in sensor testing applications? you got BCM4325.bin in right place and nvram.txt, wpa_supplicant.conf? Light sensor works in setting and also automatic. I also verified in logcat and sometimes it says: light sensor new value: XX lcd value: XX, so it's working. Going to verify wifi... Edit: all 3 files are in system/etc/wifi. BCM4325.bin is in /system/etc/firmware too... Edited October 24, 2010 by Andrea1Liquid
Guest Dario93 Posted October 24, 2010 Report Posted October 24, 2010 Ok. I made a port of EvilNxSense 1.24. It boots up,lockscreen appears,then Htc blank screen shows up,and then..noting -.-" only blank screen. I can only drag down the notification bar,lock the screen or shut the phone down... What can I do?
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 I think the problem is in the launcher that doesn't start. To be sure post a logcat (cd to the tools directory in the sdk and enter adb logcat) :P
Guest Dario93 Posted October 24, 2010 Report Posted October 24, 2010 (edited) Here it is: [url=http://pastebin.com/LbDDs35p]http://pastebin.com/LbDDs35p[/url EDIT: Enabling Flight Mode,it shows up the tutorial,then appears : "Loading... It may take several minutes to complete" Edited October 24, 2010 by Dario93
Guest vache Posted October 24, 2010 Report Posted October 24, 2010 Here it is: http://pastebin.com/LbDDs35p Wich lights.salsa.so are you using ? Try pushing the one from the last phhroyo or MIUI.
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 (edited) Strange...at the end it gives you a series of exceptions, maybe that's the cause! You also have the same error about the usb port and the wifi driver... :D One question? Evil sense is a big ROM (as it's based on sense) so you had to slim the system partition storing something (framework or app) in data or cache. What did you store? Are you sure to have typed correctly in the update-script. My theory is that you stored the app folder in another place, but did a wrong symlink (stupid mistypes :P), so the ROM doesn't find the apps anymore. (B**lS**t :D ) Btw, I tried another time, but wifi driver doesn't load. Edited October 24, 2010 by Andrea1Liquid
Guest Dario93 Posted October 24, 2010 Report Posted October 24, 2010 Ok,taken light.salsa.so from MIUI, and script seems to be OK..So reflashed,but same result,there's the message box "Loading..." with the rotating wheel.
Guest vache Posted October 24, 2010 Report Posted October 24, 2010 Ok,taken light.salsa.so from MIUI, and script seems to be OK..So reflashed,but same result,there's the message box "Loading..." with the rotating wheel. Check the logcat to see if system is still working. First boot can be very very long, try to power off the screen and power on.
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 @Vache or koudelka: can you help me? I still can't get the wifi working (also data plan)...in setting, under Wifi there's "Error". When I tap it to activate I can read for a second activating and then error again. Logcat: Wifi: can't load driver. This time I also added wpa_supplicant in bin from MIUI. Anyway in etc/firmware I have: BCM4325_apsta.bin BCM4325.bin fw_bcm4329_apsta.bin fw_bcm4329.bin bcm4329.hcd default_att.acdb default_france.acdb default.acdb yamato_pfp.fw yamato_pm4.fw BCM4325.hcd default_nel.acdb BCM4329B1_002.002.023.0436.0439.hcd In etc/wifi I have: BCM4325_apsta.bin BCM4325.bin BCM4325Fac.bin dhd.ko wpa_supplicant.conf nvram.txt In etc I have: BCM4325.hcd and others In lib/modules/: 2.6.35.4 (folder) bcm4329.ko dhd.ko ------------------------- extracted from DJDroid ROM cfq-iosched.ko cifs.ko cpufreq_conservative.ko cpufreq_interactive.ko cpufreq_powersave.ko ext4.ko fuse.ko jbd2.ko nls_utf8.ko perflock_disable3215.ko tun.ko undervolt.ko --------------------------------- :P
Guest Dario93 Posted October 24, 2010 Report Posted October 24, 2010 Check the logcat to see if system is still working. First boot can be very very long, try to power off the screen and power on. Thanks. I found an error in the symlink. Trying to reflash now
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 (edited) Thanks. I found an error in the symlink. Trying to reflash now Eeeeeeh! So I was right! :P No one helps me? I'm stuck... Edited October 24, 2010 by Andrea1Liquid
Guest vache Posted October 24, 2010 Report Posted October 24, 2010 All files come from the same source ? wifi libs in module have to correspond to the kernel. For the data part, it will be hard. The only Sense ROM that have data working is the first leak of the Desire HD. (1.04.161.2, 1.15 and newer don't work) After decompiling framework, i saw that this version have a different method to handle data connection. The best way is to take this ROM as base, or decompile both framework (framework.jar) and replace the needed files. Had it working on newer dumps. (Desire HD, Desire Z and myTouch4G)
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 (edited) Ehm...The wifi libs come from MIUI (as all the other things), but the boot.img from your Sense ROM. So have I to pick the wifi libs from your Sense port... Moreover, the DJDroid is basically Desire sense + Froyo, so I shouldn't need those modification to the famework.jar (cause your Sense port has data working), right? Edit: Ok, extracted wifi-related files from your Sense port and packed all. I'm going to flash... Edited October 24, 2010 by Andrea1Liquid
Guest vache Posted October 24, 2010 Report Posted October 24, 2010 Ehm...The wifi libs come from MIUI (as all the other things), but the boot.img from your Sense ROM. So have I to pick the wifi libs from your Sense port... Moreover, the DJDroid is basically Desire sense + Froyo, so I shouldn't need those modification to the famework.jar (cause your Sense port has data working), right? It's not really workin well, it's quite buggy and you have to made annoying things at boot. I had to mod many things in frameworks.jar and Settings.apk to have something quite working. It's more a hack than other. For sure you will not have data working without modify something. For the wifi, take the lib from this fix http://vache-android.com/files/sense/Fix1.zip If you want to play with the DesireHD 1.04 dump. http://vache-android.com/files/sense/DesireHD-1.04.161.2.rar
Guest Dario93 Posted October 24, 2010 Report Posted October 24, 2010 Finally I managed to use this ROM!! BTW,same problems,wifi not working,and it doesn't see my sim card...
Guest Andrea1Liquid Posted October 24, 2010 Report Posted October 24, 2010 (edited) Thank you. Now it should work. It's flashing...Thanks for the links. I'll be hacking with frameworks soon :P @Dario: Happy to see your success :D Edit: fail. Not worried because now I have to try with bcm4329.ko from Fix1. Edit 2: damn, didn't work... I copied all the wifi files from vache's Sense port and...Error. Edited October 24, 2010 by Andrea1Liquid
Guest koudelka Posted October 24, 2010 Report Posted October 24, 2010 It's not really workin well, it's quite buggy and you have to made annoying things at boot. I had to mod many things in frameworks.jar and Settings.apk to have something quite working. It's more a hack than other. For sure you will not have data working without modify something. For the wifi, take the lib from this fix http://vache-android.com/files/sense/Fix1.zip If you want to play with the DesireHD 1.04 dump. http://vache-android.com/files/sense/DesireHD-1.04.161.2.rar you don't use dhd.ko in your sense rom? also you got bcm4329.ko to work? (I am currently working on compiling it myself, but it seems to be broken)
Guest vache Posted October 24, 2010 Report Posted October 24, 2010 you don't use dhd.ko in your sense rom? also you got bcm4329.ko to work? (I am currently working on compiling it myself, but it seems to be broken) It always worked for me without it.
Guest koudelka Posted October 24, 2010 Report Posted October 24, 2010 It always worked for me without it. but that is becasue phh loads dhd.ko in ramdisk right? so you should only need firmware, supplicant config and nvram.txt
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now