StreakDroid FroYo v1.4.2 - Announcement Thread

[Guest springah]

any chance of getting this rom as a clean install? if i want to factory reset, i need to install stock 2.1, then 1.3?

[Guest Ed Venture]

Is it possible I have corrupted my flash ROM and/or my SD card?

I can get 1.2 and 1.3 loaded and running fine but after 24 - 48 hours, it starts getting flakey and bombing FCs where upon reboot it never comes back. I can re-flash 1.1.1 again and proceed with the upgrade, but its only a matter of time before this reoccurs. I have had to flash my Streak over 9 times since the 1.2 update.

Out of frustration, I finally bit the bullet and stayed at 1.1.1, which was stable the whole time I ran it (from the day it was released to the day 1.2 came out). But then after about a day, it too suffered the same fate.

Now today, I have moved back to 2.1 build 8105, which is a MAJOR step backwards as far as I am concerned. I just rebooted it and now it is hanging at the O2 screen. EDIT: It came back, but was factory reset AGAIN!

Are there any diagnostics I can do to determine what the heck is happening here? Is it best to go ALL the way back to 1.6? I am at a total loss here and I am really nearing the end of my rope. Any help would be appreciated.

Ed

Edited November 18, 2010 by Ed Venture

[Guest payneardo]

Is it possible I have corrupted my flash ROM and/or my SD card?

I can get 1.2 and 1.3 loaded and running fine but after 24 - 48 hours, it starts getting flakey and bombing FCs where upon reboot it never comes back. I can re-flash 1.1.1 again and proceed with the upgrade, but its only a matter of time before this reoccurs. I have had to flash my Streak over 9 times since the 1.2 update.

Out of frustration, I finally bit the bullet and stayed at 1.1.1, which was stable the whole time I ran it (from the day it was released to the day 1.2 came out). But then after about a day, it too suffered the same fate.

Now today, I have moved back to 2.1 build 8105, which is a MAJOR step backwards as far as I am concerned. I just rebooted it and now it is hanging at the O2 screen. EDIT: It came back, but was factory reset AGAIN!

Are there any diagnostics I can do to determine what the heck is happening here? Is it best to go ALL the way back to 1.6? I am at a total loss here and I am really nearing the end of my rope. Any help would be appreciated.

Ed

Ed which launcher are you using ?? I had a similar problem and uninstalled the updates for launcher pro and went down to 3 home screens and then reinstalled the updates for it and it been brilliant since then B) If you are using a different launcher I wonder if it might work as well ?? and I have stuck on 1.2 as it is just great but still tempted by the 1.3 update.. :) and would also like to say thanx to DJ steve :)

Edited November 18, 2010 by payneardo

[Guest Ed Venture]

Ed which launcher are you using ?? I had a similar problem and uninstalled the updates for launcher pro and went down to 3 home screens and then reinstalled the updates for it and it been brilliant since then B) If you are using a different launcher I wonder if it might work as well ?? and I have stuck on 1.2 as it is just great but still tempted by the 1.3 update.. :) and would also like to say thanx to DJ steve :)

I am using ADW. I am using the default number, but I don't actually fill them up (I only use 3). I can give that a try.

[Guest Ben TP]

Looping during Boot

I still can not upgrade to v1.3 and it keeps on looping on boot. Dell colored logo appeared several times.

( it's the same thing as v1.2 on my case )

This is my streak current config :

Baseband : GAUSB1A130500-EU

Android version : 2.2

Kernel Version : 2.6.32.9-perf

Build : 8558

Clockwork 2.5.0.1 already at place.

Steps I took :

1. flash amss

2. upgrade using clockwork ( of course reset factory, clear cache, wipe partition already done )

Anyone can suggest anything ?

[Guest User Error]

Looping during Boot

I still can not upgrade to v1.3 and it keeps on looping on boot. Dell colored logo appeared several times.

( it's the same thing as v1.2 on my case )

This is my streak current config :

Baseband : GAUSB1A130500-EU

Android version : 2.2

Kernel Version : 2.6.32.9-perf

Build : 8558

Clockwork 2.5.0.1 already at place.

Steps I took :

1. flash amss

2. upgrade using clockwork ( of course reset factory, clear cache, wipe partition already done )

Anyone can suggest anything ?

Flash 2.1 amss, flash 1.1.1, boot, reboot to clockwork, wipe everything, flash 2.2 amss, flash 1.3.

That's what worked for me.

[Guest sukh singh]

I only seem to get 3g signal...no H??

[Guest moto_user]

Looping during Boot

I still can not upgrade to v1.3 and it keeps on looping on boot. Dell colored logo appeared several times.

( it's the same thing as v1.2 on my case )

This is my streak current config :

Baseband : GAUSB1A130500-EU

Android version : 2.2

Kernel Version : 2.6.32.9-perf

Build : 8558

Clockwork 2.5.0.1 already at place.

Steps I took :

1. flash amss

2. upgrade using clockwork ( of course reset factory, clear cache, wipe partition already done )

Anyone can suggest anything ?

When ever i would get the looping dell logo, meaning the colors would come on, i would would remove battery put it back in, then go to recovery (press and hold both camera buttons while powering on) then chose option 1 : factory reset, then the streak would reboot on its own, dell logo came up, colors came up, then waited for the tiny vibration after the colors,

then it worked..

hope this helps..

Edited November 19, 2010 by moto_user

[Guest Ben TP]

Flash 2.1 amss, flash 1.1.1, boot, reboot to clockwork, wipe everything, flash 2.2 amss, flash 1.3.

That's what worked for me.

could you point me where can I get the correct amss image for 2.1 ?

[Guest TimoBeil]

could you point me where can I get the correct amss image for 2.1 ?

Look here: http://downloads.streakdroid.com/testing/

Hope it helps.

Edited November 19, 2010 by TimoBeil

[Guest Ben TP]

Flash 2.1 amss, flash 1.1.1, boot, reboot to clockwork, wipe everything, flash 2.2 amss, flash 1.3.

That's what worked for me.

Look here: http://downloads.streakdroid.com/testing/

Hope it helps.

Thank you.

Flashed amss to 2.1, flashed to 1.1.1, boot -> OK worked fine

Reboot to clockwork, wipe, flash amss to 2.2, upgrade 1.3 -> stuck after colored logo.

Tried factory reset, wipe still stuck after colored logo

Missed any steps ?

[Guest NO1FAN]

I only seem to get 3g signal...no H??

Same Here

[Guest vinokirk]

8. Flash the 1.2 update zip

.....

also please feel free to donate to my work if you find it useful :) - any amount is appreciated

GBP Donate | USD Donate

Should step '8.' now read '1.3'??

Just for any n00bs out there

B)

[Guest Stephen Hyde]

logs would be useful for that problem Ben TP

the 3g/h icon is just the wrong way round fixing later also

[Guest TimoBeil]

Thank you.

Flashed amss to 2.1, flashed to 1.1.1, boot -> OK worked fine

Reboot to clockwork, wipe, flash amss to 2.2, upgrade 1.3 -> stuck after colored logo.

Tried factory reset, wipe still stuck after colored logo

Missed any steps ?

I had taken the same steps: stuck in the Dell logo.

Finally, I did after flash of the new base-band and the 1.3 no resets or wipes. And now it works (with all known issues ;-))

[Guest Ben TP]

logs would be useful for that problem Ben TP

Which specific log should I post here ?

[Guest Stephen Hyde]

if you have adb logcat output should show wehere its dying, but to be certain you are factory reseting on 1.1.1 not after flashing 1.3?

[Guest vinokirk]

Hmmm mines stuck on looping logo. But not the couloured logo, my streak doesnt even get to the coloured logo. I have a couple of things still to try tho, but anyone experianced this??

[Guest Ben TP]

if you have adb logcat output should show wehere its dying, but to be certain you are factory reseting on 1.1.1 not after flashing 1.3?

To make certain, I repeat the step above and yes I didnt reset after flashing 1.3.

I attached the log, it seems to be repeating at some points.

log.txt.zip

[Guest Stephen Hyde]

that feset hasn worked thats why, you have to flash 1.1.1 then boot it once then factory rese t FROM THE FIRST SCREEN (the one with 4 options) then boot again before flashing - factory reset in clockwork does not work on streak

ok ive got hold of the offical 2.2 update thats being rolled out to, wil be investigating pulling some things off it also later

Edited November 19, 2010 by Stephen Hyde

[Guest Adilson]

ok ive got hold of the offical 2.2 update thats being rolled out to, wil be investigating pulling some things off it also later

Any chance to let us know where we can grab it? I would like to test it myself.

Thanks.

[Guest Stephen Hyde]

http://build2.streakdroid.com/Streak_309_11548_00.pkg

[Guest Adilson]

http://build2.streakdroid.com/Streak_309_11548_00.pkg

Great. I imagine I should go all the way back to the official 2.1 to apply this, correct?

[Guest Stephen Hyde]

nah you should be able just to flash 4399 recovery and flash

[Guest mellytime]

that feset hasn worked thats why, you have to flash 1.1.1 then boot it once then factory rese t FROM THE FIRST SCREEN (the one with 4 options) then boot again before flashing - factory reset in clockwork does not work on streak

ok ive got hold of the offical 2.2 update thats being rolled out to, wil be investigating pulling some things off it also later

[/quote ]

Thanks Again Stephen Working again... BTW this is nice!! again you keep improving this Rom with every update. I dont think I'm going to upgrade to the official 2.2 when I will simply root- and recustomize it this is good stuff.

Thanks