Guest streaker3000 Posted November 24, 2010 Report Posted November 24, 2010 Stupid question, maybe it was mentioned somewhere. Is there a way to get the black status bar from 1.1 back? Gray looks so lame. Thanks HydeFroyo is amazing, but the black notification bar from v1.2 definitely looks better. (I'm still running v1.2 for that reason)
Guest dellaws Posted November 26, 2010 Report Posted November 26, 2010 Is there any way of video chatting using the front facing camera. Fring doesn't use front facing camera in froyo, neither does Tango or Qik.........Any Suggestions from the Geniuses out there?>?????
Guest Mikebudner Posted November 28, 2010 Report Posted November 28, 2010 Is there any way of video chatting using the front facing camera. Fring doesn't use front facing camera in froyo, neither does Tango or Qik.........Any Suggestions from the Geniuses out there?>????? Tango says their waiting for Dell to give them an official 2.1 or 2.2 update to begin testing on thee streak!
Guest BeamMeUpStreaky Posted December 1, 2010 Report Posted December 1, 2010 This ROM is heavily updated and still being developed at a fairly rapid pace. The update process is now very simple to do but it does require that you flash a new baseband IF YOU ARE USING A REBELSIM AND DONT NEED WIFI TETHERING PLEASE STICK WITH V1.1.1 AS FLASHING THIS ROM WITHOUT BASEBAND WOULD CAUSE FLASHING LEDS SYNDROME - AND REBEL SIM CANT WORK WITH NEW BASEBAND AS YET We now have a nice new website blog for streakdroid - check it out and help me populate the wiki with faqs and get in the forums :P sites @ http://www.streakdroid.com Most Recent Version: v1.4.2 Known Issues: Accelerometer is dodgy at times but i cant pin down the issue - usually going into settings > display and toggling auto rotate on and off fixes ----------------- Changelogs ----------------- UPDATE 22/11/2010 Version 1.4.2 - Incremental update Fixed Calender Blank Screen Added in newest Google apps(incl youtube) Download here: http://downloads.streakdroid.com/djsteve/update-1.4.2.zip UPDATE 20/11/2010 Version 1.4.1 New CUSTOM BUILT Kernel WITH OVERCLOCKING SUPPORT BFS I/O Scheduler added Interactive CPUFreq Sceduler added to help cpu scaling better overclock to maximum of 1.19Ghz supported - your device may not support this speed if you get lockups or freezes drop a clock speed) underclock to 128mhz enabled - possible battery save setcpu is required for over/under clocking (its available on market or free on xda devs) FC on settings fixed UPDATE 15/11/2010 Version 1.3.0 Ported over A LOT of framework changes from leaked dell 2.2 build. Front Camera Working in cam and camcorder apps (press menu to swap between) Performance edits Deskclock app now autolaunches on connecting to av dock. some accell and gfx libs from dell build ported over also, may fix hdmi output as a side effect :D UPDATE 04/11/2010 Version 1.2.0 WiFi Native Tethering Working Updated Kernel Using one from Leaked Dell Froyo build Updated WiFi Driver To one used in Leaked Dell Froyo Build- enabled tethering to work Dropped in Dells new StageUI Added Dell Sync By Nero from Froyo rom, not sure how its used yet though Futher Performance Tweaks Thanks to new kernel and fards sysctl tweaks 720P Video recording support thanks to fards - may not work properly - see above in the 'known issues' area. (example video filmed by me: http://www.streakdroid.com/VID_20081206_193306.3gp) Reset lcd density to 160 to show StageUI properly LauncherPro 8.1.0 free version added to rom also You can choose the launcher to use on first boot (dell,adw,launcherpro) UPDATE 27/10/2010 Version 1.1.1 VERY Minor bugfix release to fix rotation and cpu problem in 1.1 :D No Wipe needed for this update as its pretty minor UPDATE 26/10/2010 Version 1.1 No Wipe needed for this update as its pretty minor Huge APNs list from cyanogenmod added (full wipe will be required for this to work i suspect) Lots of speed tweaks and fixed post_boot file so cpu scales correctly Updated ADW To 1.2.0 Added Astro file manager and Universal Androot 1.6.2Beta5 into rom UPDATE 16/10/2010 Version 1.0 A FULL WIPE OF /DATA IS HIGHLY RECOMMENDED AFTER INSTALLING THIS TO ENSURE MARKET WORKS PROPERLY Moved from Beta to version 1 of a release version. Think my black theme is done, this only works in mdpi (lcd_densitys below 200) Modified build prop and some other system files to get market working properly, all 2.2 apps are now available in market including skype etc. UPDATE 14/10/2010 Version 0.3 Heavily modified build.prop and init scripts for performance - ~of 1400 on quadrant now and upwards of 20fps on nenamark1 and 30+fps on neocore Added WPA_Supplicant binary with ad hoc support Now using my own nearly fully finished black theme Thanks to everyone for help on this build UPDATE 11/10/2010 Version 0.2 Updated boot.img with less debugging services and hopefully should fix battery issues Updated GPS.conf with edited version provided by users andycap and fards Removed couple of other apps that dont work (calibrator and packagechecker) added my newest version of build.prop ------------------ #include <std_disclaimer.h> /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */ Please feel free to donate to my work if you find it useful :lol: - any amount is appreciated GBP Donate | USD Donate ------------------- Required Files ------------------- http://build2.streakdroid.com/update-1.4.1.zip http://build2.streakdroid.com/amss.mbn ------------------- Other Requirements ------------------- Some Common Sense Pinch of Good Luck Patience Ability to read and follow instructions Fastboot Setup and Working ClockworkMod Recovery Flashed and working ------------------- Level Of Difficulty ------------------- 5/10 - Mid level, should be simple enough for 95% of users to complete ------------------- How-To ------------- this upgrade has only been tested from 1.1.1/1.2/1.3 not dell official etc. so proceed at your own risk. You need to be on v1.1.1/1.2 or 1.3(download: http://build2.streakdroid.com/update-release-1.1.1.zip) with 2.1 baseband For this to work ideally - this may work from older versions but this procedure has only been tested from 1.1.1 THIS INVOLVES A WIPE OF ALL DATA ON DEVICE SO PLEASE MAKE A BACKUP FIRST 0. Copy the update zip to your memory card first 1. Reboot streak to recovery: do this by turning off your streak then holding down Vol up + Vol Down as you press power, keep volume keys held until you get to a menu with 4 options 2. Select the Option number 1 which is called FACTORY RESET using the volume keys to move the selection and camera to select your streak will reboot on its own after this. 3. Allow streak to boot to ui - this will take some time 4. Power down your streak and boot into fastboot do this by pressing power until the keypad lights come on then HOLD camera until you get to a white screen, then tap on the fastboot text in top right corner, 5. Connect your streak to pc - the text on streak should change to FASTBOOT_MODE. you should place the amss.mbn file into the same folder as fastboot on your pc run the following commands from command prompt on your pc Windows: fastboot -i 0x413c flash amss amss.mbn Linux fastboot flash amss amss.mbn 6. Type the following commands to reboot your streak - again alow it to boot into the main ui - you will lose network connection for the moment, this is fine, also streak WILL reboot twice before booting, again this is normal Windows: fastboot -i 0x413c reboot Linux fastboot reboot 7. Once your device has booted shut down again and boot into clockwork recovery by doing the following boot to recovery as per step 1 then choose option 2. 8. Flash the 1.4 update zip 9. reboot This can be rooted using universal androot but could take 2 attempts Thanks to: Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps Andycap & fards for providing modified Gps.conf homeiss forthe excellent upgrade/downgrade guide everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os. everyone else who helped/is helping hopefully thats everything :D any issues theirs me and a few of my tech head irc helpers keeping an eye on the posts. or just jump in the irc channel #dellstreak on freenode for help. also please feel free to donate to my work if you find it useful :lol: - any amount is appreciated GBP Donate | USD Donate Wow im lost. when i get to the choose option 2 and flash the zip file (which is there on my sd) the phone tells me to go download a copy at dell! ??
Guest thehodapp Posted December 1, 2010 Report Posted December 1, 2010 I'm using Ubuntu and have a beta Streak with 1.1.1 and I have followed Steve's instructions up to step 5. My streak goes into FASTBOOT_MODE. However nothing happens in Ubuntu. I have the Android SDK installed but I have no idea how to run fastboot. Where is the fastboot command?
Guest maskaler Posted December 1, 2010 Report Posted December 1, 2010 I'm using Ubuntu and have a beta Streak with 1.1.1 and I have followed Steve's instructions up to step 5. My streak goes into FASTBOOT_MODE. However nothing happens in Ubuntu. I have the Android SDK installed but I have no idea how to run fastboot. Where is the fastboot command? you running the command using sudo?
Guest BeamMeUpStreaky Posted December 1, 2010 Report Posted December 1, 2010 Hi. i cant get this to install because my streak refuses .zip. it only wants to upgrade pkg files! is there a pkg version of the new 2.2 from steve ? Thank you
Guest Rathbone Posted December 29, 2010 Report Posted December 29, 2010 Are you in fastboot mode on the streak (white screen says fastboot at the bottom)¿ yes i am in fast mode ive re-done all the steps a few times but dont have a clue where i am going wrong
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now