Guest djsolidsnake86 Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) do you have the patch for remove the vibration when i unlock the phone? can you post it please? Edited February 11, 2011 by djsolidsnake86 Link to comment Share on other sites More sharing options...
Guest Yce Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) I suggest You to try once again, step by step. It must work... I tried, but no luck. So here what I did: Formated with phone a brand new sd card 2gb. Copied the beta2_1024.zip content to my storage. Copied the 3dlibs to my storage root(it copied it becouse disapperd from the root dir after first boot). Run the haret.exe from o2beta dir, the installation is succesful. Then I run the haret.exe from the root of the my storage. after ipc transfer it hangs a bit, then blank screen then reboot. I saw an error, I don't know maybe related to the problem. the error was something like this: multipdp... invalid id: 10 no such device. By the way, the beta1 works fine, so it's very strange :P Edited February 11, 2011 by Yce Link to comment Share on other sites More sharing options...
Guest alexovy Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) I have compared my O2 with some "native" android phones...because I was wondering about the battery drain. If you go to About Phone - Battery use, you can see that most of the battery is consumed by Cell standby...around 60% and the Phone idle is about 2%. On other Android phones, Cell Standby is around 10% and Phone idle is around 50%. And something more interesting is that if I go to Cell Standby, it says "Time without a signal: 50%". I think that this might be the reason for the battery drain. And even more interesting...I switched the phone to Airplane Mode....but the Cell Standby is still 60% and Time Without a signal...yeap...you guest it: 50% :P Can you guys check this? Thank you! Edited February 11, 2011 by alexovy Link to comment Share on other sites More sharing options...
Guest myo2wantandroid Posted February 11, 2011 Report Share Posted February 11, 2011 Run the haret.exe from o2beta dir, the installation is succesful. Then I run the haret.exe from the root of the my storage. after ipc transfer it hangs a bit, then blank screen then reboot. I saw an error, I don't know maybe related to the problem. the error was something like this: multipdp... invalid id: 10 no such device. By the way, the beta1 works fine, so it's very strange :P I have EXACTLY THE SAME PROBLEM. CAn someone tell me why it doesnt work?? plz. Ist the same problem .... Link to comment Share on other sites More sharing options...
Guest mat9v Posted February 11, 2011 Report Share Posted February 11, 2011 @Yce: What is the filename of your 3dlibs update? It should be o2b2update.tar.gz Link to comment Share on other sites More sharing options...
Guest alexovy Posted February 11, 2011 Report Share Posted February 11, 2011 I have EXACTLY THE SAME PROBLEM. CAn someone tell me why it doesnt work?? plz. Ist the same problem .... after first reboot...go to windows...copy the 3D drivers and then start haret. It should work. Link to comment Share on other sites More sharing options...
Guest Yce Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) @Yce: What is the filename of your 3dlibs update? It should be o2b2update.tar.gz Yes it is. I know :P Please someone link the correct 3d drives. Edited February 11, 2011 by Yce Link to comment Share on other sites More sharing options...
Guest myo2wantandroid Posted February 11, 2011 Report Share Posted February 11, 2011 I have put the 3d drivers before the first start into mystorage ?? Link to comment Share on other sites More sharing options...
Guest Odysseas07 Posted February 11, 2011 Report Share Posted February 11, 2011 Use sudo. you meen that i have to write it like this ??? - cd /media/disk - cd /system/bin - sudo rm -f su - ln -s /system/xbin/su su how i can write it ???? Link to comment Share on other sites More sharing options...
Guest Yce Posted February 11, 2011 Report Share Posted February 11, 2011 I have put the 3d drivers before the first start into mystorage ?? Yes! By the way, for me works now, i downloaded the wrong version of the 3d drivers :P Link to comment Share on other sites More sharing options...
Guest myo2wantandroid Posted February 11, 2011 Report Share Posted February 11, 2011 for me it dont work. Can you post me the link of the right 3d driver?? For me it dont work. Shoult i put the 3d driver into my storage before starting haret the first time?? Link to comment Share on other sites More sharing options...
Guest furik Posted February 11, 2011 Report Share Posted February 11, 2011 voytecks: thank you for package, I just unpacked it manually in ubuntu virtual box to My Storage, so far no issues, Android booting without problems and currently I am syncing phone with google account. Will post experiences later on. devs: very good job and crossing fingers! Link to comment Share on other sites More sharing options...
Guest Yce Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) Don't know if I can share the link, if not i'll remove it. 3d drivers: http://rapidshare.com/#!download|482l3...ate.tar.gz|1480 Oh and a big thanks for the devs :P you're doing a very great job! :D Edited February 11, 2011 by Yce Link to comment Share on other sites More sharing options...
Guest betamale Posted February 11, 2011 Report Share Posted February 11, 2011 I have compared my O2 with some "native" android phones...because I was wondering about the battery drain. If you go to About Phone - Battery use, you can see that most of the battery is consumed by Cell standby...around 60% and the Phone idle is about 2%. On other Android phones, Cell Standby is around 10% and Phone idle is around 50%. And something more interesting is that if I go to Cell Standby, it says "Time without a signal: 50%". I think that this might be the reason for the battery drain. And even more interesting...I switched the phone to Airplane Mode....but the Cell Standby is still 60% and Time Without a signal...yeap...you guest it: 50% :P Can you guys check this? Thank you! I have Cell Standby is around 49% and Phone idle is around 46% Display 4% Android System 2 % Time on 7h 38m Time without signal 0% I fully charged it over night an have it unplugged since the morning... 72% Battery level.... pretty good isn't it? Link to comment Share on other sites More sharing options...
Guest alexovy Posted February 11, 2011 Report Share Posted February 11, 2011 I have Cell Standby is around 49% and Phone idle is around 46% Display 4% Android System 2 % Time on 7h 38m Time without signal 0% I fully charged it over night an have it unplugged since the morning... 72% Battery level.... pretty good isn't it? hmm...how is that possible? I want that toooooooooooo :P Link to comment Share on other sites More sharing options...
Guest voyteckst Posted February 11, 2011 Report Share Posted February 11, 2011 I have Cell Standby is around 49% and Phone idle is around 46% Display 4% Android System 2 % Time on 7h 38m Time without signal 0% I fully charged it over night an have it unplugged since the morning... 72% Battery level.... pretty good isn't it? I assume 3g data connection off? ;-) Link to comment Share on other sites More sharing options...
Guest urkopi Posted February 11, 2011 Report Share Posted February 11, 2011 Don't know if I can share the link, if not i'll remove it. 3d drivers: http://rapidshare.com/#!download|482l3...ate.tar.gz|1480 Oh and a big thanks for the devs :P you're doing a very great job! :D What update is that!? Thanks... Link to comment Share on other sites More sharing options...
Guest Odysseas07 Posted February 11, 2011 Report Share Posted February 11, 2011 voyteckst you meen that i have to write it like this ??? - cd /media/disk - cd /system/bin - sudo rm -f su - ln -s /system/xbin/su su how i can write it ???? Link to comment Share on other sites More sharing options...
Guest TIEfighter Posted February 11, 2011 Report Share Posted February 11, 2011 What update is that!? Thanks... The 2d/3d Libraries that work :P You can also find them in the info thread I´m now charging my Omnia, it looks lite it´s not in sleep mode while charging (any key wakes it up etc.), is that okay? Link to comment Share on other sites More sharing options...
Guest voyteckst Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) voyteckst you meen that i have to write it like this ??? - cd /media/disk - cd /system/bin - sudo rm -f su - ln -s /system/xbin/su su how i can write it ???? cd /media/disk/system/bin sudo rm -rf su sudo ln -s ../xbin/su su The 2d/3d Libraries that work :P You can also find them in the info thread I´m now charging my Omnia, it looks lite it´s not in sleep mode while charging (any key wakes it up etc.), is that okay? It's normal. Edited February 11, 2011 by voyteckst Link to comment Share on other sites More sharing options...
Guest redzone321 Posted February 11, 2011 Report Share Posted February 11, 2011 I have compared my O2 with some "native" android phones...because I was wondering about the battery drain. If you go to About Phone - Battery use, you can see that most of the battery is consumed by Cell standby...around 60% and the Phone idle is about 2%. On other Android phones, Cell Standby is around 10% and Phone idle is around 50%. And something more interesting is that if I go to Cell Standby, it says "Time without a signal: 50%". I think that this might be the reason for the battery drain. And even more interesting...I switched the phone to Airplane Mode....but the Cell Standby is still 60% and Time Without a signal...yeap...you guest it: 50% :P Can you guys check this? Thank you! i see the same thing. Link to comment Share on other sites More sharing options...
Guest TRoN_1 Posted February 11, 2011 Report Share Posted February 11, 2011 I asked this before but never got a reply. How do you calibrate/align the screen? I don't see it in Settings. Thanks TRoN Link to comment Share on other sites More sharing options...
Guest djsolidsnake86 Posted February 11, 2011 Report Share Posted February 11, 2011 i haved a sleep of death, and unable to start wlan after sleep (with the beta of voykteckst) so these 2 problem are not solved completly Link to comment Share on other sites More sharing options...
Guest myo2wantandroid Posted February 11, 2011 Report Share Posted February 11, 2011 Don't know if I can share the link, if not i'll remove it. 3d drivers: http://rapidshare.com/#!download|482l3...ate.tar.gz|1480 Oh and a big thanks for the devs :P you're doing a very great job! :D That are the 3D drivers i have installed. But it doesnt work. I have the same Errors as you and then a reboot?? Should i put in the 3d drivers before first start or already wen ive startet it onces? Link to comment Share on other sites More sharing options...
Guest Odysseas07 Posted February 11, 2011 Report Share Posted February 11, 2011 i haved a sleep of death, and unable to start wlan after sleep (with the beta of voykteckst) so these 2 problem are not solved completly +1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now