Guest LorD CLockaN Posted November 19, 2010 Report Posted November 19, 2010 Everything working for now.. rooted no problem, applied fard tweaks.. How can I change default phone icon in home screen to start another program, not default dell's phone caller??
Guest American Raptor Posted November 19, 2010 Report Posted November 19, 2010 Can someone help me? I have put everything I need on the C drive including fastboot-windows.exe and boot.img and all that stuff. The flashing goes just fine, and I reboot, then I just sit at the dell logo.
Guest navy Guy Posted November 19, 2010 Report Posted November 19, 2010 what are people using to gain root access?
Guest Gopu Posted November 19, 2010 Report Posted November 19, 2010 fastboot -i 0x413c flash boot boot.img fastboot -i 0x413c flash system system.img fastboot -i 0x413c flash amss amss.mbn Successful flash. Here is my story I was on steve's 1.3 version . Have a dell streak purchased from dell and locked to att. Just followed these steps as suggested in the quote above and at the end i also used fastboot -i 0x413c reboot to restart the phone. Was stuck on dell logo for 5-7 min and then it started. everything working well, except for force close with 720p camera. I decided to to reset it after a shut down and i have an all new froyo from streak Then i rooted with z4root app from the market.
Guest vlamers Posted November 19, 2010 Report Posted November 19, 2010 Hello I flashe these 3 files to a german "Media-Markt" Streak. Now it stucks on dell logo since 25 mins. How can I fix this. I came from original 1.6 00 rom I hav done factory Reset and hold the power Button when I put in the Battery. Nothing helps Can I flash Dj Steves 1.1.1 Thanks vlamers
Guest navy Guy Posted November 19, 2010 Report Posted November 19, 2010 Can someone help me? I have put everything I need on the C drive including fastboot-windows.exe and boot.img and all that stuff. The flashing goes just fine, and I reboot, then I just sit at the dell logo. how long has it been sitting? shoudl only be five min. if still nothing..the pull the battery and do a factory reset ....then wait..if still nothing the do the process over...that worked for me
Guest American Raptor Posted November 19, 2010 Report Posted November 19, 2010 (edited) Are you doing this is windows?? Because I have to type in fastboot-windows.exe -i 0143c flash boot boot.img. Everyone else seems to just be typing flashboot? I have been letting it sit for ten minutes at a time. This is my third try.. I wonder what I'm doing wrong. Maybe I'll try a different directory. Edited November 19, 2010 by American Raptor
Guest Bigootang Posted November 19, 2010 Report Posted November 19, 2010 Was on Steves 1.3 and booted this now problem.....however found it slow and cluncky so have gone straight back to Steves....!
Guest haynesteve Posted November 19, 2010 Report Posted November 19, 2010 (edited) here's my Build.prop in case anyone wants it and has rooted the build.. extract and copy to /system (backup the old one) it helps speed things up a bit if you install busybox, (from the market) then the sysctl.conf goes in /etc/ and is called by adding sysctl -p to /etc/init.streak.post_boot.sh on a new line after the esac if feeling adventurous change the 6000000 value to 3000000 in sysctl.conf WOW ! some tweak had 1300 quadrant score on Steve's 1.3 build - installed offical 2.2 and dropped to 820 ish B) But this tweak ! Now have a score of 1444 - now if you & Steve can tweak it a little bit more :)! Edited November 19, 2010 by haynesteve
Guest hammermedia Posted November 19, 2010 Report Posted November 19, 2010 (edited) Fresh Streak. Never even booted the stock 1.6 AT&T US. I DLd the amss zip and I installed the drivers, got fastboot, wrote the 3 files, all said OKAY, I pulled the battery and I'm stuck on the Dell Logo. I re-flashed and same thing, I tried a fastboot reboot instead of pulling battery and same thing. clockwork recovery came up just fine and I did a factory reset from the menu and same thing. If I hold vol up and vol down do I have to do an "update using package" then vol up vol dn and factory reset? All I can get is Dell Logo. Do I have to start with O2 ? If so what version? Edited November 19, 2010 by hammermedia
Guest haynesteve Posted November 19, 2010 Report Posted November 19, 2010 what are people using to gain root access? z4root from market
Guest krrrk Posted November 19, 2010 Report Posted November 19, 2010 what are people using to gain root access? Hi All the z4root program found in the market works perfectly with the official Streak 2.2 I've just tried it!
Guest lufc Posted November 19, 2010 Report Posted November 19, 2010 If you get stuck on the dell logo try holding down the POWER BUTTON whilst PUTTING THE BATTERY back in and the COVER BACK ON B)
Guest blankers Posted November 19, 2010 Report Posted November 19, 2010 Just did the upgrade and everything is fine EXCEPT , for some reason I can't see my wifi or my neighbours. My pc sees it o.k. And I don't have any 3g signal..... I did a factory reset, but that didn't help. Anyone got any ideas ? I can't do much without it......... Managed to get a 3g signal now by deleting the 2 apn's that were there and adding the o2 pay monthly one....but still no wifi !! Nobody else having a wifi problem ? Any ideas gratefully received... B) Please.......
Guest vlamers Posted November 19, 2010 Report Posted November 19, 2010 If you get stuck on the dell logo try holding down the POWER BUTTON whilst PUTTING THE BATTERY back in and the COVER BACK ON B) Tried this. Doesn´t help. My streak will not boot... Greetings vlamers
Guest mmp669 Posted November 19, 2010 Report Posted November 19, 2010 androot doesnt work.. superoneclick is pretty self explanatory, check the thread.. although it doesn't install busybox like it says, and may say its failed, it still works... reboot afterwards and all should be good Z4root works, search in the market.
Guest American Raptor Posted November 19, 2010 Report Posted November 19, 2010 Fresh Streak. Never even booted the stock 1.6 AT&T US. I DLd the amss zip and I installed the drivers, got fastboot, wrote the 3 files, all said OKAY, I pulled the battery and I'm stuck on the Dell Logo. I re-flashed and same thing, I tried a fastboot reboot instead of pulling battery and same thing. clockwork recovery came up just fine and I did a factory reset from the menu and same thing. If I hold vol up and vol down do I have to do an "update using package" then vol up vol dn and factory reset? All I can get is Dell Logo. Do I have to start with O2 ? If so what version? I'm having the same problem. Please let me know if you find a fix!
Guest rnj79 Posted November 19, 2010 Report Posted November 19, 2010 Steve, You are so very needed at XDA! I got mine going on 2.2 but other haven't. I don't want to confuse them...
Guest sukicat Posted November 19, 2010 Report Posted November 19, 2010 (edited) Can someone confirm the correct order to Flash the 3 files for the dell 2.2 has it seems to a bit of confusion or does it make any difference ? Edited November 19, 2010 by sukicat
Guest Mirrdhyn Posted November 19, 2010 Report Posted November 19, 2010 I think that Steve did this installation on his version (2.2 v1.3), am I right ? I have tested on my Original 1.6 6267-00 and I have the Dell logo indefinitely. I am trying to go on the version 2.2 v1.3 and test again. Thank you Steven for your great job B)
Guest Gopu Posted November 19, 2010 Report Posted November 19, 2010 Can someone confirm the correct order to Flash the 3 files for the dell 2.2 has it seems to a bit of confusion or does it make any difference ? fastboot -i 0x413c flash boot boot.img fastboot -i 0x413c flash system system.img fastboot -i 0x413c flash amss amss.mbn fastboot -i 0x413c reboot this worked for me.
Guest simplydata Posted November 19, 2010 Report Posted November 19, 2010 (edited) Thanks!!!!!!!!!!! At first, it was just hanging but factory reset did the job for me. ATT 1.6 -> Steve v1.2 -> Stock 2.2 Edited November 20, 2010 by simplydata
Guest rnj79 Posted November 19, 2010 Report Posted November 19, 2010 I did mine from O 2.1. I didn't got to Steve's ROM first. All I did was flash the files he uploaded today and my Streak is working with 2.2!
Guest Tim6772 Posted November 19, 2010 Report Posted November 19, 2010 fastboot -i 0x413c flash boot boot.img fastboot -i 0x413c flash system system.img fastboot -i 0x413c flash amss amss.mbn fastboot -i 0x413c reboot this worked for me. Ran that on an O2 UK 2.1 and it worked flawless. Ran SuperOneClick 1.5 and that worked same way too. Just need to kill that poxy Facebook app now Time to suss out ADB methinks (well, tomorrow maybe, spent all day flashing and re flashing, getting good at it now lol)
Guest sukicat Posted November 19, 2010 Report Posted November 19, 2010 (edited) fastboot -i 0x413c flash boot boot.img fastboot -i 0x413c flash system system.img fastboot -i 0x413c flash amss amss.mbn fastboot -i 0x413c reboot this worked for me. Seems doing it this way works has well going by some users fastboot -i 0x413c flash amss amss.mbn fastboot -i 0x413c flash boot boot.img fastboot -i 0x413c flash system system.img fastboot -i 0x413c reboot so not sure if that is why some users are getting problems ? Edited November 19, 2010 by sukicat
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now