MIUI 1.4.8 Liquid

[Guest gioviiz89]

when i try to flash the rom malez utility says that :

"verifyng update packege

E: no signature

E:verification failer

what can i do?

[Guest Güilzom]

when i try to flash the rom malez utility says that :

"verifyng update packege

E: no signature

E:verification failer

what can i do?

Flash it without sign check !!!

[Guest gioviiz89]

Flash it without sign check !!!

EDIT : DOne! thank you very much!

Edited December 27, 2010 by gioviiz89

[Guest Waffel22]

How can i do it? my so sorry for my N00b style

In recovery you can choose between

• flash zip
  
• flash zip (no sign check)
  
• test flash zip
  
• test flash zip (no sign check)
  

You have to use the second one of these to get it working.

[Guest matthewye]

Dear MarkII,

I applied the sensor fix by clicking update.bat. It starts looping the two booting screen. Should I wipe then flash the rom then flash the fix (clicking update.bat) again?

Cheers,

Mat

[Guest markII]

Dear MarkII,

I applied the sensor fix by clicking update.bat. It starts looping the two booting screen. Should I wipe then flash the rom then flash the fix (clicking update.bat) again?

Cheers,

Mat

Which update.bat? Flash rom, then flash sensors fix and at last language pack

[Guest matthewye]

Which update.bat? Flash rom, then flash sensors fix and at last language pack

I was not allowed to download the fix from megaupload. It says 'This service is temporarily not available from your service area.' So I downloaded it from http://bbs.gfan.com/android-297572-1-1.html. It is a 5.3MB winrar file containing some files and one of it is update.bat.

I believe that the fix on gfan is not the right one. Can you please upload it elsewhere?

Thank you for very much in advance.

Cheers,

Mat

[Guest Güilzom]

I was not allowed to download the fix from megaupload. It says 'This service is temporarily not available from your service area.' So I downloaded it from http://bbs.gfan.com/android-297572-1-1.html. It is a 5.3MB winrar file containing some files and one of it is update.bat.

I believe that the fix on gfan is not the right one. Can you please upload it elsewhere?

Thank you for very much in advance.

Cheers,

Mat

Uploadiing a Mirror @ Mediafire

LINK: http://www.mediafire.com/?ql6d8xx15zaik87

Edited December 27, 2010 by Güilzom

[Guest Güilzom]

A question... How to do for enable the light sensor.... When I choose the "sun" icon with the 'A'.. always choose the darkest bright...

The same happened to me with the roggin version of the 11.3 that I used to run. There is an option or a different way to enable the auto light sensor ??

Order of install

1. Wipe all - cache dalvin cache, etc,

2. flash rom

3. flash sensor fix

4. flash english pack

5. flash english keyborad

Edited December 27, 2010 by Güilzom

[Guest matthewye]

Uploadiing a Mirror @ Mediafire

thanks a million!

[Guest Güilzom]

MIRROR for ROM: http://www.mediafire.com/?n93v9ncab83y4v3

MIRROR for sensor fix: http://www.mediafire.com/?ql6d8xx15zaik87

[Guest Ramdanih]

MIRROR for ROM: http://www.mediafire.com/?n93v9ncab83y4v3

MIRROR for sensor fix: http://www.mediafire.com/?ql6d8xx15zaik87

thx for ur mirror.. :(

[Guest matthewye]

MIRROR for ROM: http://www.mediafire.com/?n93v9ncab83y4v3

MIRROR for sensor fix: http://www.mediafire.com/?ql6d8xx15zaik87

thanks. I 've flashed these files and then a gingerbread keyboard.apk. The phone gets no signal so I am not able to use it now. It could be the service provider but it is probably the rom.

[Guest mik93250]

"MIUI 0.12.24 Liquid Full HW" what means "HW"??

[Guest markII]

full hardware support :(

[Guest Güilzom]

"MIUI 0.12.24 Liquid Full HW" what means "HW"??

Hardware...

That means that all the hardware is working with full support...

For me everythnig works except by the light sensor, I waiting for help to calibrate it or reset something to fix it.

[Guest mik93250]

HW=Hardware thanks :(

[Guest Ghost-XIII]

Can you post an example? I Have not any problems with games.

With a good use of setcpu my battery is acceptable with 960 mHz frequency.

Yes, this is still a beta version..

Hello! a big thank you for supporting the proximity sensor

Here are some pictures that illustrate the bug texture:

http://img835.imageshack.us/gal.php?g=snap20101227131459.png

I have no problem with the rom metal Froyo 2.75

[Guest Albert777]

Fix does not work :(

[Guest gioviiz89]

In recovery you can choose between

• flash zip
  
• flash zip (no sign check)
  
• test flash zip
  
• test flash zip (no sign check)
  

You have to use the second one of these to get it working.

Thank you very much!!! the MIUI is the best ROM i've ever tried

[Guest Gnask]

Wonderful MIUI

Edited December 27, 2010 by Gnask

[Guest Ramdanih]

MIUI gallery now work fine.. :(

[Guest fear_factory84]

What about malez recovery app2sd on this rom? Is there any way?

Tethering works well for me both via USB, and wifi with wpa2-psk. I still haven't tried proximity and light sensors.

I can confirm that my mw-600 ad2p bluetooth headset works well, I had perhaps some kernel errors on dmesg:

<7>[ 7948.710656] Bluetooth power switch: 1

<3>[ 7958.866982] hci_cmd_task: hci0 command tx timeout

<4>[ 7959.250393] 

<4>[ 7959.250421] =================================

<4>[ 7959.250472] [ INFO: inconsistent lock state ]

<4>[ 7959.250522] 2.6.29 #10

<4>[ 7959.250557] ---------------------------------

<4>[ 7959.250603] inconsistent {in-softirq-W} -> {softirq-on-W} usage.

<4>[ 7959.250665] krfcommd/56 [HC0[0]:SC0[0]:HE1:SE1] takes:

<4>[ 7959.250714]  (slock-AF_BLUETOOTH){-+..}, at: [<c0343560>] rfcomm_sk_state_change+0x2c/0xdc

<4>[ 7959.250863] {in-softirq-W} state was registered at:

<4>[ 7959.250907]   [<c009acd8>] __lock_acquire+0x5f4/0x17ac

<4>[ 7959.251002]   [<c009bef4>] lock_acquire+0x64/0x78

<4>[ 7959.251073]   [<c03505c8>] _spin_lock+0x48/0x58

<4>[ 7959.251146]   [<c033a98c>] l2cap_connect_cfm+0x48/0xc8

<4>[ 7959.251238]   [<c0336fe0>] hci_event_packet+0x2914/0x2e7c

<4>[ 7959.251313]   [<c0331f14>] hci_rx_task+0xa4/0x26c

<4>[ 7959.251386]   [<c0078bb0>] tasklet_action+0x7c/0xc8

<4>[ 7959.251466]   [<c0079160>] __do_softirq+0x8c/0x14c

<4>[ 7959.251537]   [<c0079280>] irq_exit+0x60/0xb0

<4>[ 7959.251604]   [<c003205c>] __exception_text_start+0x5c/0x74

<4>[ 7959.251679]   [<c0032b10>] __irq_svc+0x50/0x94

<4>[ 7959.251746]   [<c0085c8c>] flush_workqueue+0x50/0x7c

<4>[ 7959.251828]   [<c0338b90>] add_conn+0x1c/0x48

<4>[ 7959.251898]   [<c0085290>] run_workqueue+0x11c/0x214

<4>[ 7959.251968]   [<c00857e4>] worker_thread+0x108/0x11c

<4>[ 7959.252038]   [<c0089778>] kthread+0x5c/0x98

<4>[ 7959.252118]   [<c0076fdc>] do_exit+0x0/0x7c8

<4>[ 7959.252183]   [<ffffffff>] 0xffffffff

<4>[ 7959.252250] irq event stamp: 620

<4>[ 7959.252289] hardirqs last  enabled at (620): [<c03503e4>] _spin_unlock_irqrestore+0x44/0x70

<4>[ 7959.252377] hardirqs last disabled at (619): [<c03506b8>] _spin_lock_irqsave+0x24/0x68

<4>[ 7959.252463] softirqs last  enabled at (613): [<c00791f8>] __do_softirq+0x124/0x14c

<4>[ 7959.252547] softirqs last disabled at (550): [<c0079324>] do_softirq+0x54/0x78

<4>[ 7959.252630] 

<4>[ 7959.252642] other info that might help us debug this:

<4>[ 7959.252693] 2 locks held by krfcommd/56:

<4>[ 7959.252733]  #0:  (rfcomm_mutex){--..}, at: [<c0340cd8>] rfcomm_run+0x1d0/0x1494

<4>[ 7959.252862]  #1:  (&d->lock){--..}, at: [<c03409cc>] rfcomm_dlc_accept+0x34/0x88

<4>[ 7959.252988] 

<4>[ 7959.253001] stack backtrace:

<4>[ 7959.253043] [<c034cdec>] (dump_stack+0x0/0x30) from [<c00998ec>] (mark_lock+0x1464/0x159c)

<4>[ 7959.253192] [<c0098488>] (mark_lock+0x0/0x159c) from [<c009ad64>] (__lock_acquire+0x680/0x17ac)

<4>[ 7959.253325]  r8:00000002 r7:00000263 r6:c6d4c43c r5:ce5209b0 r4:ce520540

<4>[ 7959.253463] [<c009a6e4>] (__lock_acquire+0x0/0x17ac) from [<c009bef4>] (lock_acquire+0x64/0x78)

<4>[ 7959.253594] [<c009be90>] (lock_acquire+0x0/0x78) from [<c03505c8>] (_spin_lock+0x48/0x58)

<4>[ 7959.253720]  r7:c6d4c42c r6:00000000 r5:c0343560 r4:c6d4c42c

<4>[ 7959.253835] [<c0350580>] (_spin_lock+0x0/0x58) from [<c0343560>] (rfcomm_sk_state_change+0x2c/0xdc)

<4>[ 7959.253964]  r5:c8ad5e00 r4:c6d4c400

<4>[ 7959.254036] [<c0343534>] (rfcomm_sk_state_change+0x0/0xdc) from [<c03409e4>] (rfcomm_dlc_accept+0x4c/0x88)

<4>[ 7959.254168]  r7:c03b9f24 r6:c552a400 r5:c8ad5e64 r4:c8ad5e00

<4>[ 7959.254282] [<c0340998>] (rfcomm_dlc_accept+0x0/0x88) from [<c0341d08>] (rfcomm_run+0x1200/0x1494)

<4>[ 7959.254410]  r7:c03b9f24 r6:ce523f88 r5:c8ad5e00 r4:c8ad5e84

<4>[ 7959.254525] [<c0340b08>] (rfcomm_run+0x0/0x1494) from [<c0089778>] (kthread+0x5c/0x98)

<4>[ 7959.254652] [<c008971c>] (kthread+0x0/0x98) from [<c0076fdc>] (do_exit+0x0/0x7c8)

<4>[ 7959.254776]  r7:00000000 r6:00000000 r5:00000000 r4:00000000

<6>[ 7959.254890] dump_stack done. flush_cache_all after __backtrace(). 

<6>[ 7959.970524] input: AVRCP as /devices/virtual/input/input4

[Guest nurogo]

I have managed to install this rom, and it's the best i've had.

But theme's aren't working. I Download them, install but nothing happen's. The theme remains the original.

Anyone has the same problem?

Thanks

[Guest demura]

I have managed to install this rom, and it's the best i've had.

But theme's aren't working. I Download them, install but nothing happen's. The theme remains the original.

Anyone has the same problem?

Thanks

+ 1