[TEST] OC kernel with working App2sd V2

[Guest bellanano]

Tryied (and it works) but restored nandroid backup because :

Not working :

Wifi thetering

Headphone recognition

cannot disable haptick feedback for softkeys

and battery drain very high

Edited December 14, 2010 by bellanano

[Guest uio88]

@thepasto hi i have applied the boot file v2 and when i go to setcpu i see 998 max cpu velocity,why?

[Guest thepasto]

@thepasto hi i have applied the boot file v2 and when i go to setcpu i see 998 max cpu velocity,why?

It's correct value, i don't understand your question.. It is not safe set frequency over 1ghz.. So i preferred set this limit, and from what I can see by your comments I understand that maybe it is already too high! If you want i can unlock all frequencies but this is the limit, to have a fully working phone

[Guest uio88]

It's correct value, i don't understand your question.. It is not safe set frequency over 1ghz.. So i preferred set this limit, and from what I can see by your comments I understand that maybe it is already too high! If you want i can unlock all frequencies but this is the limit, to have a fully working phone

ok,thanks,for me can unlock all frequencies,but i have another question,my quadrant test arrived max around 1000,why?how can i have a result like the first post? thanks thepasto number one !

[Guest thepasto]

ok,thanks,for me can unlock all frequencies,but i have another question,my quadrant test arrived max around 1000,why?how can i have a result like the first post? thanks thepasto number one !

I don't know.. Try to enable new audio codecs in lcr settings e retry.. I try to modify meny things in these days.. Don't look at quadrant score, it isnt a true index .. In my opinion if a rom works fine, no matter what you say a program .. I used Lcr even when quadrant score was around 700 and it was really fast and smooth for my usage.

[Guest styjp]

I'm on LCRF 1.1.2 with 4.504b light.. Breaks headphones and crashes and restarts all the time! Thnx though! Looking forward to a much more stable release as I am a great fun of clocking! :)

[Guest fischschneehase]

@thepasto

could ypu plaese disable haptkfeedback in next v. One qestion you wrote something about that data to ext?! With the new boot is this true that its implemented?!:)

[Guest jackkykung]

@thepasto

could ypu plaese disable haptkfeedback in next v. One qestion you wrote something about that data to ext?! With the new boot is this true that its implemented?!:)

I'm thinking about it too.

[Guest thepasto]

@thepasto

could ypu plaese disable haptkfeedback in next v. One qestion you wrote something about that data to ext?! With the new boot is this true that its implemented?!:)

if i had time, i will rebuild kernel and i will try to fix some bugs.. About data2ext i used some mount point options in malez autostart to increase fs r/w speed.(I/O speed is now over 2000 in quadrant). i'd like to enable ext4 partition, so i need ext4 kernel module, i think.

[Guest fischschneehase]

if i had time, i will rebuild kernel and i will try to fix some bugs.. About data2ext i used some mount point options in malez autostart to increase fs r/w speed.(I/O speed is now over 2000 in quadrant). i'd like to enable ext4 partition, so i need ext4 kernel module, i think.

Needs the ext 2 a min. Size to get this work cause cant notice an increased. Quadrantscore...?!

[Guest Varyag]

thepasto, did you thought about FoRMATting _internal_ memory in ext2/3/4? without moving smth to SD-EXT...

like on sgs or samsung spica..

[Guest zbrin]

If you have these problems try to lower the frequency, not all devices operate at 998Mhz .. I do not know why. I was almost a month since I use it to 1036mhz without any kind of problem with liquid E. With the liquid instead I can not go beyond 960MHz

I though the default frequency was at 768 with this kernel but with the ability to overclock, but it seem like its default is 998, I've set setcpu on boot to 768, and so far no more reboots, now I will increase to find my highest stable freq. But this is strange because with LCR-E 1.8.2, I had my phone @ 1ghz and it was stable..

Maybe this kernel is more unstable or something like this?

So far I'm noticing a big battery drain (@ 768ghz) but I test it more tomorow.

Thanks for your work :)

[Guest max2rock]

Did you flash v2? Can you post a logcat please? Did you already have app2sd enabled? How many partitions in your sd?

hi pasto

tried v2 got same result. yea i have a 1gb ext2 n apps2sd is enabled.

sendlog.txt

[Guest thepasto]

hi pasto

tried v2 got same result. yea i have a 1gb ext2 n apps2sd is enabled.

Can't see anything wrong in your logcat.. this is not full log, there are only few lines. Try to post the adb logcat | grep Vold command output after a reboot.

If you can try to tell me more about your problem.

[Guest honghong]

SD CARD don't work....

AND I CAN'T USE THE PHONE NOW..AND I CAN'T GET IN THE RECOVERRY MODE!

I HAVE TO REINSTALL ALL THING =[ !

Edited December 15, 2010 by honghong

[Guest fischschneehase]

Needs the ext 2 a min. Size to get this work cause cant notice an increased. Quadrantscore...?!

[Guest fischschneehase]

SD CARD don't work....

AND I CAN'T USE THE PHONE NOW..AND I CAN'T GET IN THE RECOVERRY MODE!

I HAVE TO REINSTALL ALL THING =[ !

impossible... which rom are you running?? whart did you try

[Guest Dario93]

SD CARD don't work....

AND I CAN'T USE THE PHONE NOW..AND I CAN'T GET IN THE RECOVERRY MODE!

I HAVE TO REINSTALL ALL THING =[ !

Seems that also your CAPS-lock is not working :)

However, I quote fischschneehase , this is pretty impossible, are you sure you're on Froyo?

Edited December 15, 2010 by Dario93

[Guest thepasto]

SD CARD don't work....

AND I CAN'T USE THE PHONE NOW..AND I CAN'T GET IN THE RECOVERRY MODE!

I HAVE TO REINSTALL ALL THING =[ !

To enter in recovery turn off your phone. Then press camera button+volume down+power on. Wait for 3 times vibrate, your phone boot in recovery. Could tell me what's happened?

[Guest mmkim]

V2 on the memory card ..... no need to do anything(ext) in the case of the successful find. also overclocked to 998hz. because this is the only choice to overclocking. When connected to pc using usb, the power led quickly jump .. .. crazy. :) :)

[Guest fischschneehase]

found another bug...i was running the phone for about afew hours und opening the browser makes the phone reboot ....after a reboot it happens severl times now ... gonna try another browser than the standard one ...

and i have got another question in the first post thepasto wrote something about data to ext2 implemented i am not sure cause i can notice an better score for this in quadrant

[Guest thepasto]

found another bug...i was running the phone for about afew hours und opening the browser makes the phone reboot ....after a reboot it happens severl times now ... gonna try another browser than the standard one ...

and i have got another question in the first post thepasto wrote something about data to ext2 implemented i am not sure cause i can notice an better score for this in quadrant

Are you running v2? As you can see in first screenshot i get over 2000 in I/O.. But this is not full port of data2ext because i only add some mount options. Before opening browser run adb logcat, i don't think it's a kernel problem..

[Guest dieghito]

yes, this zip file works, because my lcr is stable because set to 998 mhz rarely the phone reboot. the OC work still to 998 mhz. Up this number not. (excuse me for my english)

quadrant score is 1150 1189 max.

but I don't know if thanks to flashing phh_kernel.zip or thanks to this zip I make 1150 in quadrant

[Guest fischschneehase]

Are you running v2? As you can see in first screenshot i get over 2000 in I/O.. But this is not full port of data2ext because i only add some mount options. Before opening browser run adb logcat, i don't think it's a kernel problem..

Yed v2 i get arround 600 haha hm iwill make a log later das the ext2 need to have a min size to get it work? Mine is 128 mb small...

Edited December 15, 2010 by fischschneehase

[Guest dieghito]

how did you do 2000?