omniai8000 usb problem

[Guest marcusbywind]

I have a omnia i8000

and have done several updates roms

until you find one who really liked

about 4 days after installing the rom that I liked

the phone no longer recognized by computer

the message "USB device not recognized"

I tried to change settings: disable advanced mode

I tried to read memory and change nothing

I tried on several computers

cable and therefore should not be charging the battery

does have a solution?

[Guest Comage]

It sounds like your USB entries in windows is corrupted. Try running this app USBDeview:

http://www.nirsoft.net/utils/usb_devices_view.html

And then from the list of installed devices, clear out the multiple entries that match your omnia i8000.

Then try to plug in your phone again and see if it recognizes it again correctly.

[Guest marcusbywind]

It sounds like your USB entries in windows is corrupted. Try running this app USBDeview:

http://www.nirsoft.net/utils/usb_devices_view.html

And then from the list of installed devices, clear out the multiple entries that match your omnia i8000.

Then try to plug in your phone again and see if it recognizes it again correctly.

but it happens on all computers

and not just one

[Guest marcusbywind]

but it happens on all computers

and not just one

i did it and tried again and nothing.

the problem is in the cel, i think.

[Guest marcusbywind]

i did it and tried again and nothing.

the problem is in the cel, i think.

the rom i instaled is:

PDA: I8000NXXJH2

CSC: I8000XEEJH2

PHONE: I8000XXJF1

[Guest Comage]

OK, I think you bricked your phone. Try to reflash your phone with the original ROM?

[Guest marcusbywind]

OK, I think you bricked your phone. Try to reflash your phone with the original ROM?

thanks for helping me comage

how to do that without connection to computer

[Guest Snow02]

thanks for helping me comage

how to do that without connection to computer

Octans should still see that it's connected.

[Guest marcusbywind]

Octans should still see that it's connected.

unfortunately does not detect. octans don't see.

is that who made this rom can help me?

the rom i instaled is:

PDA_I8000NXXJH2_HW_40.MST

CSC: I8000XEEJH2

PHONE: I8000XXJF1

[Guest kromo]

unfortunately does not detect. octans don't see.

is that who made this rom can help me?

the rom i instaled is:

PDA_I8000NXXJH2_HW_40.MST

CSC: I8000XEEJH2

PHONE: I8000XXJF1

i have the same problem of you with diferent rom. and my phone don't charge in mode on, only in mode off.

[Guest marcusbywind]

i have the same problem of you with diferent rom. and my phone don't charge in mode on, only in mode off.

try connecting the phone off and then start to load, you can start that he keeps loading

[Guest pacaq]

i have the same problem of you with diferent rom. and my phone don't charge in mode on, only in mode off.

I used to have this problem before, can charge when off, not on, however, what i did was to let it fully discharge (playing with the phone by turning on camera, gps etc2) then with the phone off, plug in the charger until it fully recharge (wait until 6-8 hours), then the phone can be recognize in the computers, and you should flash it with all the parts (eboot, phone and rom), therefore have your octans ready with the stuffs before you plug in your phone after fully charge it

[Guest pacaq]

i have the same problem of you with diferent rom. and my phone don't charge in mode on, only in mode off.

I used to have this problem before, can charge when off, not on, however, what i did was to let it fully discharge (playing with the phone by turning on camera, gps etc2) then with the phone off, plug in the charger until it fully recharge (wait until 6-8 hours), then the phone can be recognize in the computers, and you should flash it with all the parts (eboot, phone and rom), therefore have your octans ready with the stuffs before you plug in your phone after fully charge it

[Guest marcusbywind]

I used to have this problem before, can charge when off, not on, however, what i did was to let it fully discharge (playing with the phone by turning on camera, gps etc2) then with the phone off, plug in the charger until it fully recharge (wait until 6-8 hours), then the phone can be recognize in the computers, and you should flash it with all the parts (eboot, phone and rom), therefore have your octans ready with the stuffs before you plug in your phone after fully charge it

thanks

I'll try

[Guest marcusbywind]

thanks

I'll try

nothing

don't work

how can i talk with the moderator or experts?

[Guest abdelrahim]

This is really the worst scenario that somebody can expect..I had a similar problem about 4 years back after flashing my xda Stealth with a custom ROM and was solved by flashing a different ROM using SD card...Unfortunately so far, we cant flash Omnia I8000 Using the micro sd card.

You said that the problem happened after 4 days, so was it working well immediately after flashing?

[Guest marcusbywind]

This is really the worst scenario that somebody can expect..I had a similar problem about 4 years back after flashing my xda Stealth with a custom ROM and was solved by flashing a different ROM using SD card...Unfortunately so far, we cant flash Omnia I8000 Using the micro sd card.

You said that the problem happened after 4 days, so was it working well immediately after flashing?

I don't know

maybe I just have connected the computer a few days later.

and then seen the problem.

just one day, I was connected and gave message malfunction

[Guest CalvinH]

Hi!

I guess it's a stupid suggestion, but since you don't say it in the post... Have you tried hard-resetting the O2?

Also, I've done the flashing two ways. First one starting with the O2 syncronyzed with Activesync, and the other one starting with the O2 off. Since your computer doesn't recognizes the O2, have you tried the second way?

If you have already tried everything don't get mad at me for these suggestions :( . I am only trying to help with whatever crosses my mind ;)

Regards.

[Guest marcusbywind]

Hi!

I guess it's a stupid suggestion, but since you don't say it in the post... Have you tried hard-resetting the O2?

Also, I've done the flashing two ways. First one starting with the O2 syncronyzed with Activesync, and the other one starting with the O2 off. Since your computer doesn't recognizes the O2, have you tried the second way?

If you have already tried everything don't get mad at me for these suggestions :( . I am only trying to help with whatever crosses my mind ;)

Regards.

thank you for help

yes, i tried all

[Guest kromo]

nothing i try all the suggest but he 's the same.

no connection, no flash, nothing...

still charging in mode off, not in On.

happy new year for all