Guest gnufabio Posted January 27, 2011 Report Posted January 27, 2011 Camera works fine here. Liquid A Now battery life is really better than before, thanks Koudelka. :lol: [italian] Quanto dura la batteria? [/italian]
Guest yapa73 Posted January 27, 2011 Report Posted January 27, 2011 [italian] Quanto dura la batteria? [/italian] probqbly like oficial leak... penso che stiamo sui risultati dellq leak ufficiale... non male, e migliorera... i've jit abble.... no probblem to me. only whem i go in subway, conection no function... ok, but when i return to air, i must disqble and abble manualy comection to sync my data... and web acces... so icon conection was grey, but not conect. just turn off and on manualy to be perfect.
Guest TheShak Posted January 27, 2011 Report Posted January 27, 2011 Not sure I had the same problem when using only the fast_dormancy boot.img, but for sure this BCM boot.img does seem to disconnect 3G and does not reconnect automatically. Which is a problem when phone is in your pocket and your expecting that critical email... Might switch back to fast_dormancy boot just to be sure THX
Guest barmyman Posted January 27, 2011 Report Posted January 27, 2011 In order to fix 3d issue: Maybe we should try to replace the video driver of gingerbread with a driver of froyo? can some dev try to do it?
Guest HustlinDaily Posted January 27, 2011 Report Posted January 27, 2011 Wish it were. Then every port would be perfect in terms of all hardware working.
Guest Achmet Schachbrett Posted January 27, 2011 Report Posted January 27, 2011 I wish there was also a working cifs.ko module so one could stream movies directly from e.g. a Home Server.
Guest g3cko Posted January 27, 2011 Report Posted January 27, 2011 I had the no-network problem again this morning, restored a nandroid from 2 days ago and it was back to working. Are there any other ways to solve this problem? I've tried wiping cache/dalvic cache when the problem occurs, disabling/enableing data, rebooting many times. Nothign fixes it except a nandroid restore of an older image.
Guest barmyman Posted January 27, 2011 Report Posted January 27, 2011 tell me: where does the video driver are stored?
Guest Varyag Posted January 27, 2011 Report Posted January 27, 2011 tell me: where does the video driver are stored? system/lib/egl or maybe in boot.img, dunno.
Guest bellanano Posted January 27, 2011 Report Posted January 27, 2011 Is old app2sd working on this rom? (App2Sd from malez recovery)
Guest xaueious Posted January 27, 2011 Report Posted January 27, 2011 (edited) My turn to try this ROM: CM7.0_v0.3 -> http://android.modaco.com/content/acer-liq...erbread-comes/# gapps-gb-20110120-signed -> http://wiki.cyanogenmod.com/index.php?title=Latest_Version CM7-Gingerbread-A2sd_update -> http://android.modaco.com/content-page/327...0/#entry1540659 bcm4329_boot -> http://android.modaco.com/content-page/327...0/#entry1576658 Flash them all :lol: Someone can put this all together eh? It's like a treasure hunt. Did a full wipe to try features. No static boot img bootscreen... That's okay. Not much left to fix that I use normally. apps2sd defaults to apps only. Changing it in malez results in bootloop. Anyways docs here according to thepasto: http://forum.xda-developers.com/showthread.php?t=715940 Move dalvik-cache to sd: # a2sd cachesd My RAM: total used free shared buffers Mem: 436948 39948 397000 0 16 Swap: 0 0 0 Total: 436948 39948 397000 The world is beautiful. Edited January 27, 2011 by xaueious
Guest monoxide.tryst Posted January 27, 2011 Report Posted January 27, 2011 Someone can put this all together eh? It's like a treasure hunt. +1
Guest bellanano Posted January 27, 2011 Report Posted January 27, 2011 (edited) But how to enable app2sd? By malez recovery or just flash the update zip? Edited January 27, 2011 by bellanano
Guest xaueious Posted January 27, 2011 Report Posted January 27, 2011 If you flashed thepasto, a2sd will work already. Read the darktremor docs for config through shell. I think. Going to retry it now
Guest thepasto Posted January 27, 2011 Report Posted January 27, 2011 (edited) If you flashed thepasto, a2sd will work already. Read the darktremor docs for config through shell. I think. Going to retry it now Guys last boot from Koud does not work with app2sd. Unluckly we have a big bug in vold (sd mount manager), so we can't use it like others phones do. To run it we need for a little hack and a new way to start sysinit from init.rc. Tomorrow i'll ask to roggin and koud, if they agree we could release a new version (CM Gingerbread 2.3.2), with everything you need! Last cm is ready, just some little fix are missing. Maybe this weekend we will have new CM :lol: Thanks Edited January 27, 2011 by thepasto
Guest xaueious Posted January 27, 2011 Report Posted January 27, 2011 (edited) I just noticed that my fat wasn't being mounted. Will check this out Edit: Okay. I'll sit back and be lazy then :lol: Edited January 27, 2011 by xaueious
Guest thongrim Posted January 27, 2011 Report Posted January 27, 2011 Guys last boot from Koud does not work with app2sd. Unluckly we have a big bug in vold (sd mount manager), so we can't use it like others phones do. To run it we need for a little hack and a new way to start sysinit from init.rc. Tomorrow i'll ask to roggin and koud, if they agree we could release a new version (CM Gingerbread 2.3.2), with everything you need! Last cm is ready, just some little fix are missing. Maybe this weekend we will have new CM :lol: Thanks Thank you so much for this big and fantastic news! :)
Guest xaueious Posted January 27, 2011 Report Posted January 27, 2011 It is still probably a couple of releases away from being a daily driver, but we are really getting close
Guest bellanano Posted January 27, 2011 Report Posted January 27, 2011 (edited) Thepasto, but i've flashed your patch and then koudelka last patch and the enabled app2sd from malez and it works! Noticed that touchscreen is less sensitive in the bottom part, if you try to upper the notification bar it's very difficult Edited January 27, 2011 by bellanano
Guest xaueious Posted January 27, 2011 Report Posted January 27, 2011 I didn't have touchscreen bugs. Might have to do with the clock settings in the kernel.
Guest Achmet Schachbrett Posted January 27, 2011 Report Posted January 27, 2011 What about including the new Honeycomb music.apk? I get FC when I try to open it, then I re-install and it works until the next time I boot :lol:
Guest kenelm Posted January 28, 2011 Report Posted January 28, 2011 Guys last boot from Koud does not work with app2sd. Unluckly we have a big bug in vold (sd mount manager), so we can't use it like others phones do. To run it we need for a little hack and a new way to start sysinit from init.rc. Tomorrow i'll ask to roggin and koud, if they agree we could release a new version (CM Gingerbread 2.3.2), with everything you need! Last cm is ready, just some little fix are missing. Maybe this weekend we will have new CM :lol: Thanks I don't know why I got it works. Anyway, thanks for the good news :)
Guest andoyanna Posted January 28, 2011 Report Posted January 28, 2011 (edited) Guys last boot from Koud does not work with app2sd. Unluckly we have a big bug in vold (sd mount manager), so we can't use it like others phones do. To run it we need for a little hack and a new way to start sysinit from init.rc. Tomorrow i'll ask to roggin and koud, if they agree we could release a new version (CM Gingerbread 2.3.2), with everything you need! Last cm is ready, just some little fix are missing. Maybe this weekend we will have new CM :lol: Thanks Great!!! :) :) ;) And Thanks to all of you!!! Edited January 28, 2011 by andoyanna
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now