Guest davidevinavil Posted February 5, 2011 Report Posted February 5, 2011 (edited) Hi vache can you make an update with acer lockscreen? I saw on your twitter that you are able to run A5 leak on your liquid metal.. I understand right?! Can i flash that leak on my metal with acer tool? Thank a lot for your beautiful work ;) ;) Edited February 5, 2011 by davidevinavil
Guest vache Posted February 5, 2011 Report Posted February 5, 2011 I've just installed this wonderful rom, flashing 100.16 and then flashing Metalounary 1.2 via AmonRA 1.0. I have an issue with the wifi: the signal is very bad comparing with the stock rom. I've tried re-flashing the stock and got full signal. But when installing this metalounary again it drops down again. There's a way to solve it? Maybe the kernel included in Metalounary has a worse driver? Drivers are the same, still using the one provided by Acer, and nothing was modify about WiFi in the kernel. Did you check the signal with an application, or did you look at the icon on notfication bar ? Hi vache can you make an update with acer lockscreen? I saw on your twitter that you are able to run A5 leak on your liquid metal.. I understand right?! Can i flash that leak on my metal with acer tool? Thank a lot for your beautiful work :P :D This ROM is Acerless, so for now, no Acer UI. You should not flash a bin from an other device with Acer Tools, you will have a nice brick Metal.
Guest andryandrew Posted February 6, 2011 Report Posted February 6, 2011 (edited) Simply the range of the connection is significantly reduced (the connection hangs out about ten meters far from the router). But maybe the problem is my router...with the stock rom it works normally though. Edited February 6, 2011 by andryandrew
Guest harylauw Posted February 6, 2011 Report Posted February 6, 2011 Hi, 1. It's not in my plan for now, but who knows... 2. You mean sources ? just the kernel.like http://www.acer-android.fr/5ghz-swap-ext2-t1974.html
Guest vache Posted February 6, 2011 Report Posted February 6, 2011 just the kernel.like http://www.acer-android.fr/5ghz-swap-ext2-t1974.html The kernel is the quite the same as the one in the link, just added app2sd support.
Guest athanaso77 Posted February 6, 2011 Report Posted February 6, 2011 Is this Kernel different than the one tom_sad uses in his rom? 1.5 GHz kernel with 43FPS limit
Guest vache Posted February 6, 2011 Report Posted February 6, 2011 Is this Kernel different than the one tom_sad uses in his rom? 1.5 GHz kernel with 43FPS limit I supposed he's using mine, taked from Metalounay. Better to ask him :P
Guest harylauw Posted February 6, 2011 Report Posted February 6, 2011 The kernel is the quite the same as the one in the link, just added app2sd support. how about FPS limit? thank you :P when do you expect gingerbread leak will come to metal?
Guest vache Posted February 6, 2011 Report Posted February 6, 2011 how about FPS limit? thank you :P when do you expect gingerbread leak will come to metal? 1. By disabling vsync in panel drivers 2. Dunno, wait and see.
Guest mrtimexp Posted February 6, 2011 Report Posted February 6, 2011 Wi-Fi don't works for me!!! i have flashed the last metalounay...1.2 any solutions?
Guest athanaso77 Posted February 6, 2011 Report Posted February 6, 2011 Wi-Fi don't works for me!!! i have flashed the last metalounay...1.2 any solutions? Have you done any wipe after flashing? If yes that is the problem. Flash first official 1.100.16 bin, do wipe all, flash metalounay 1.2 and you are ready!
Guest mrtimexp Posted February 6, 2011 Report Posted February 6, 2011 yes i have done any wipe.....but i don't flashed the official rom..... only metalounay
Guest DaveGT Posted February 7, 2011 Report Posted February 7, 2011 (edited) Installed this firmware fine and it worked great....expect the adw launcher always crashes on me - did in the last firmware too. I don't like the stock version so tweaked it a bit....dunno if that had something to do with it. Anyway today....I unlocked my phone and saw it had froze - no dock menu and I couldn't navigate to anything....so after being frustrated with this several times I decided to remove it. I used AppAdmin to remove it as it is a system app, thinking it would revert to the standard android UI....however my phone wouldn't boot into the home screen...just sat there at the Android logo flashing. Got into recovery, re-flashed and works again...but still have this launcher I dislike. Anyone know how I can remove it without semi-bricking my phone? Cheers p.s. now gonna try installing a new launcher then remove adw and see if it still bricks...a fun night ahead lol Edited February 7, 2011 by DaveGT
Guest DaveGT Posted February 7, 2011 Report Posted February 7, 2011 (edited) Installed this firmware fine and it worked great....expect the adw launcher always crashes on me - did in the last firmware too. I don't like the stock version so tweaked it a bit....dunno if that had something to do with it. Anyway today....I unlocked my phone and saw it had froze - no dock menu and I couldn't navigate to anything....so after being frustrated with this several times I decided to remove it. I used AppAdmin to remove it as it is a system app, thinking it would revert to the standard android UI....however my phone wouldn't boot into the home screen...just sat there at the Android logo flashing. Got into recovery, re-flashed and works again...but still have this launcher I dislike. Anyone know how I can remove it without semi-bricking my phone? Cheers p.s. now gonna try installing a new launcher then remove adw and see if it still bricks...a fun night ahead lol Ok so I downloaded launcher pro and used home switch to launch it and set as default....then used appadmin to remove adw and rebooted phone - has came back fine so think problem solved. Edited February 7, 2011 by DaveGT
Guest athanaso77 Posted February 7, 2011 Report Posted February 7, 2011 yes i have done any wipe.....but i don't flashed the official rom..... only metalounay First do the wipe, second flash the rom.
Guest harylauw Posted February 7, 2011 Report Posted February 7, 2011 1. By disabling vsync in panel drivers 2. Dunno, wait and see. okay thank you...nice job bro :P
Guest harylauw Posted February 7, 2011 Report Posted February 7, 2011 btw, do you have a plan to enable swap on metal? thank you :P
Guest vache Posted February 7, 2011 Report Posted February 7, 2011 btw, do you have a plan to enable swap on metal? thank you :P It's already enable.
Guest athanaso77 Posted February 7, 2011 Report Posted February 7, 2011 1. By disabling vsync in panel drivers And how can we do that?
Guest vache Posted February 7, 2011 Report Posted February 7, 2011 (edited) And how can we do that? By changing : pinfo->lcd.vsync_enable = TRUE; to pinfo->lcd.vsync_enable = FALSE; & pinfo->lcd.hw_vsync_mode = TRUE; to pinfo->lcd.hw_vsync_mode = FALSE; in $/drivers/video/msm/mddi_auo_wvga.c in kernel sources. Edited February 7, 2011 by vache
Guest robincc Posted February 7, 2011 Report Posted February 7, 2011 Have you ADW launcher in this new rom as well? I do not like it so much, I think it would be better with a clean Gingerbread theme and just mass performer improvement and weight loss. I was going to try one of Vache or tom_sad rum soon but idont know which one is best :P
Guest vache Posted February 7, 2011 Report Posted February 7, 2011 Yes, it have ADW.Launcher as default launcher.
Guest andryandrew Posted February 7, 2011 Report Posted February 7, 2011 Does removing the FPS limit cause more battery consumption?
Guest harylauw Posted February 7, 2011 Report Posted February 7, 2011 It's already enable. is it swap on microSD ?
Guest vache Posted February 7, 2011 Report Posted February 7, 2011 Does removing the FPS limit cause more battery consumption? It should not, never make test to confirm that. is it swap on microSD ? Yes. Swap file only.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now