Guest jenny045 Posted January 18, 2011 Report Posted January 18, 2011 The factory reboot didn't work. I can't get the fastboot mode on my computer cause it can't read device. I'm lost to be honest. Can you provide me step by step directions. thx
Guest jnaldaco Posted January 19, 2011 Report Posted January 19, 2011 The factory reboot didn't work. I can't get the fastboot mode on my computer cause it can't read device. I'm lost to be honest. Can you provide me step by step directions. thx Try this link: http://android.modaco.com/index.php?act=at...st&id=66682 It will explain things on how to.
Guest jenny045 Posted January 19, 2011 Report Posted January 19, 2011 Ok so i followed the directions but when i get to install the rom part and copy the file to my SD card and go into the clock work recovery it gives me an error message E:Can't find MISC:
Guest SiegmundMarx Posted January 19, 2011 Report Posted January 19, 2011 Ok so i followed the directions but when i get to install the rom part and copy the file to my SD card and go into the clock work recovery it gives me an error message E:Can't find MISC: this is´nt an error. ignore this.
Guest alexmoi Posted January 19, 2011 Report Posted January 19, 2011 Any idea when 1.6.1 will be out on the "market"? Can't wait to try it out ;)
Guest Spectre51 Posted January 19, 2011 Report Posted January 19, 2011 (edited) Holy crap. I had hesitated installing this just because I was happy with stock 2.2 318 but bit the bullet and installed it along with streakmod. Never knew how fast my streak could be. It is like a new device. Install was super simple, just used the us160 and bios options in the install.cfg/ Getting 1500-1600 on quadrant without using setpu. Question, I see it installed Quadrant Advanced....whats the difference between that and Standard found in the market? Edited January 19, 2011 by Spectre51
Guest Spectre51 Posted January 19, 2011 Report Posted January 19, 2011 Installed SetCPU and not sure I am using it right. Just open it and move the slider for max and min right then hit home? Nothing else to set or change? I left scaling on smartass. Is there a guide that explains all the other settings?
Guest Spectre51 Posted January 19, 2011 Report Posted January 19, 2011 (edited) Removed post Edited January 19, 2011 by Spectre51
Guest LorD CLockaN Posted January 19, 2011 Report Posted January 19, 2011 Holy crap. I had hesitated installing this just because I was happy with stock 2.2 318 but bit the bullet and installed it along with streakmod. Never knew how fast my streak could be. It is like a new device. Install was super simple, just used the us160 and bios options in the install.cfg/ Getting 1500-1600 on quadrant without using setpu. Question, I see it installed Quadrant Advanced....whats the difference between that and Standard found in the market? advanced shows results while offline, for standard you need to be online.. Don't set max setcpu t o1260, leava it at max 1190.. After this the higher you go, do more volatge is supplied to CPU (bad for CPU (could reset device if overheated), bad fopr battery life). Set the option start on boot and remove setcpu from any automatic task killers! thats it
Guest anthscorner Posted January 19, 2011 Report Posted January 19, 2011 Holy crap. I had hesitated installing this just because I was happy with stock 2.2 318 but bit the bullet and installed it along with streakmod. Never knew how fast my streak could be. It is like a new device. Install was super simple, just used the us160 and bios options in the install.cfg/ Getting 1500-1600 on quadrant without using setpu. Question, I see it installed Quadrant Advanced....whats the difference between that and Standard found in the market? Quadrant advanced shows the details on the tests i.e. cpu, memory, io, 2d, 3d. ;)
Guest Spike8585 Posted January 19, 2011 Report Posted January 19, 2011 Ok so i followed the directions but when i get to install the rom part and copy the file to my SD card and go into the clock work recovery it gives me an error message E:Can't find MISC: I had the same problem, and it wouldn't load the rom. I had to rename the file to update.zip, then it worked no problem.
Guest popetodd Posted January 19, 2011 Report Posted January 19, 2011 I just choose the pick a zip from sd card option and browse to the one I want, works every time for me.
Guest evedder Posted January 19, 2011 Report Posted January 19, 2011 com.android.phone crashing in 1 of 2 calls please fix it.
Guest Spectre51 Posted January 19, 2011 Report Posted January 19, 2011 advanced shows results while offline, for standard you need to be online.. Don't set max setcpu t o1260, leava it at max 1190.. After this the higher you go, do more volatge is supplied to CPU (bad for CPU (could reset device if overheated), bad fopr battery life). Set the option start on boot and remove setcpu from any automatic task killers! thats it Thanks, if I add a profile for setCPU to underclock the CPU when screen is off and only setup that one profile when the screen is on it will run at full speed correct? I've got to play the the settings on it a big cause this morning when using it the battery was draining like crazy 1% every minute it seemed like. Gotta say though loving 1.6.0 makes things feel a lot quicker though still have some lag when going from portrait to landscape with launcher pro. Is there an update planned to allow the gingerbread theme to to portrait?
Guest LorD CLockaN Posted January 19, 2011 Report Posted January 19, 2011 Thanks, if I add a profile for setCPU to underclock the CPU when screen is off and only setup that one profile when the screen is on it will run at full speed correct? I've got to play the the settings on it a big cause this morning when using it the battery was draining like crazy 1% every minute it seemed like. Gotta say though loving 1.6.0 makes things feel a lot quicker though still have some lag when going from portrait to landscape with launcher pro. Is there an update planned to allow the gingerbread theme to to portrait? min frequency allready measn that it will underclokto MIN when screen off. don't need any profiles
Guest foxhoundep3 Posted January 19, 2011 Report Posted January 19, 2011 com.android.phone crashing in 1 of 2 calls please fix it. Any other requests your majesty?
Guest aLpHa K7 Posted January 19, 2011 Report Posted January 19, 2011 (edited) Any other requests your majesty? Ha ha! foxhoundep3... not to change topics too much, but I'm guessing you have an EP3, right? I thought I read somewhere that benchmark tests aren't everything (Quadrant, Neocore, Linpack.. I'm sure there's others). If they're not, then why do phone reviewers always run them and post the scores? Edited January 19, 2011 by aLpHa K7
Guest Domino Posted January 20, 2011 Report Posted January 20, 2011 com.android.phone crashing in 1 of 2 calls please fix it. Everything works perfectly for me. Try reflashing.
Guest foxhoundep3 Posted January 20, 2011 Report Posted January 20, 2011 Ha ha! foxhoundep3... not to change topics too much, but I'm guessing you have an EP3, right? I thought I read somewhere that benchmark tests aren't everything (Quadrant, Neocore, Linpack.. I'm sure there's others). If they're not, then why do phone reviewers always run them and post the scores? I do, k20a2, hondata, a hatchback monster ;) , and when I hook up the dell streak to it I get even more horsepower ha!
Guest Spectre51 Posted January 20, 2011 Report Posted January 20, 2011 If I uninstall setcpu will that remove any of the changes it made? My battery is just draining way to fast with it working.
Guest DMax99 Posted January 20, 2011 Report Posted January 20, 2011 steve.....any chance of having Gingerbread on our device soon?
Guest cowballz Posted January 20, 2011 Report Posted January 20, 2011 Does anyone have issues with wallpapers looking really bad??? Seams to be zooming in on everything looking very pixalated
Guest alexmoi Posted January 20, 2011 Report Posted January 20, 2011 Does anyone have issues with wallpapers looking really bad??? Seams to be zooming in on everything looking very pixalated Same here but is only in landscape mode. When your in portrait mode everything is back to normal
Guest cowballz Posted January 20, 2011 Report Posted January 20, 2011 Same here but is only in landscape mode. When your in portrait mode everything is back to normal Na man looks like poop both ways, i never had this issue before, im sure it will be ironed out by steve
Guest Phylar Posted January 20, 2011 Report Posted January 20, 2011 Thanks Steve. I also had problems with us180, but just manually edited the build.prop file later. In this build, and in all 1.5.x builds, I've never had the video camera working. it acts like it's recording, and then you try to stop it, and nothing happens for a bit, then you get an FC on System.Camera or something. I can't remember the last time I"ve had mine working honestly. Taking pictures works fine, however. Any ideas?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now