Guest BTJ Posted January 27, 2011 Report Posted January 27, 2011 Is the md5sum in the first post correct? I tried to download the beta 1 twice but got the same incorrect md5sum both times... BTJ
Guest q8y-80 Posted January 28, 2011 Report Posted January 28, 2011 thanks for the great work, but dose it support arabic lang.
Guest clockwork_LS Posted January 28, 2011 Report Posted January 28, 2011 (edited) Lots of changes in alpha3 (coming up soon)... it feels even more responsive, and even benches a little faster too. :lol: P This is insane, i know you are good at this paul, but the highest i get on quadrant is 998, you have doubled the score!!! (w/ or w/o overclock?) What do you get on linpack? I must thank you for your past and present work on many devices, i was getting bored of everything working fine on my TAB, i need to tinker, and the quadrant score is definitely the correct motivation for a sleepless night rooting and flashing!!! Edit: So i believe i have reached an impasse, how do i install clockworkmod on my Euro Tab, (need simple explanation) there is no Euro recovery, only Verizon, AT&T and T-Mobile... arg!!! should i just wait for the euro recovery or is there a simple other way? Edited January 28, 2011 by clockwork_LS
Guest roy8846 Posted January 28, 2011 Report Posted January 28, 2011 This is insane, i know you are good at this paul, but the highest i get on quadrant is 998, you have doubled the score!!! (w/ or w/o overclock?) What do you get on linpack? I must thank you for your past and present work on many devices, i was getting bored of everything working fine on my TAB, i need to tinker, and the quadrant score is definitely the correct motivation for a sleepless night rooting and flashing!!! Edit: So i believe i have reached an impasse, how do i install clockworkmod on my Euro Tab, (need simple explanation) there is no Euro recovery, only Verizon, AT&T and T-Mobile... arg!!! should i just wait for the euro recovery or is there a simple other way? ClockworkMod is installed automatically when you flash the Modaco Kernel (r3 is the newest). Look a few topics below this one :lol:
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 Beta 2 online! :lol: Non-wipe for Beta 1 users, auto-wipe for everyone else. P Changelog Beta 2 (forthcoming)Now based on the JMG releaseFixed 'dict' crashFixed device not responding correctly to 'reboot' commandAdded AppWidgetPicker (user request)Revered Swype to the 'full widget' version (will be optional when kitchen is online)Restored / updated e-reading applicationsUpdated Flash PlayerAdded Titanium Backup in ROM (for convenience - will be optional when kitchen is online)Included non-wipe update for Beta 1 usersGingerbread sounds (notifications, ringtones etc.)
Guest rinaldos Posted January 28, 2011 Report Posted January 28, 2011 Hi, thanks for the new ROM. I have upgraded from BETA 1 and the Upgrade Procedure works like a charme. But after the Upgrade, the Exchange Client doesn't work anymore:-( I used the builtin Mail Application. I deleted my account Information and set up a new Account, but the Exchange Client could noch fetch any mails :-( Can anyone confirm this error? Thanks in Advance rinaldos
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 Hi, thanks for the new ROM. I have upgraded from BETA 1 and the Upgrade Procedure works like a charme. But after the Upgrade, the Exchange Client doesn't work anymore:-( I used the builtin Mail Application. I deleted my account Information and set up a new Account, but the Exchange Client could noch fetch any mails :-( Can anyone confirm this error? Thanks in Advance rinaldos Investigating. P
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 Hi, thanks for the new ROM. I have upgraded from BETA 1 and the Upgrade Procedure works like a charme. But after the Upgrade, the Exchange Client doesn't work anymore:-( I used the builtin Mail Application. I deleted my account Information and set up a new Account, but the Exchange Client could noch fetch any mails :-( Can anyone confirm this error? Thanks in Advance rinaldos Exchange mail working OK here i'm afraid, both with an existing account and setting it up again. P
Guest rinaldos Posted January 28, 2011 Report Posted January 28, 2011 Exchange mail working OK here i'm afraid, both with an existing account and setting it up again. P Hm, i tried a full restore, and after i updated the non-wipe Version again. I will leave a reply :-) Thanks for your fast reply. rinaldos
Guest clockwork_LS Posted January 28, 2011 Report Posted January 28, 2011 ClockworkMod is installed automatically when you flash the Modaco Kernel (r3 is the newest). Look a few topics below this one :lol: Ok can you help me out, i kinda messed it all up, im not very good at this stuff... Tab was Rooted yesterday. installed ODIN (1.7), set tab into download mode, Checked auto reboot and F. Reset Time, but not Re-Partition, PDA File - p1000-mck-r3-ext4-cwm Pit File - s1_odin_20100803.pit Pressed start, all went fine, said passed, took about 3 seconds... went into clockworkmod and said it failed md5 something... What did i do wrong?
Guest roy8846 Posted January 28, 2011 Report Posted January 28, 2011 Ok can you help me out, i kinda messed it all up, im not very good at this stuff... Tab was Rooted yesterday. installed ODIN (1.7), set tab into download mode, Checked auto reboot and F. Reset Time, but not Re-Partition, PDA File - p1000-mck-r3-ext4-cwm Pit File - s1_odin_20100803.pit Pressed start, all went fine, said passed, took about 3 seconds... went into clockworkmod and said it failed md5 something... What did i do wrong? I did not use a pit file at all?? I dont even know what one does lol.. Flashed the r3 using odin , rebooted into recovery and it did the ext4 conversion (with an SD card inserted with plenty of room)... DONE!
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 Ok can you help me out, i kinda messed it all up, im not very good at this stuff... Tab was Rooted yesterday. installed ODIN (1.7), set tab into download mode, Checked auto reboot and F. Reset Time, but not Re-Partition, PDA File - p1000-mck-r3-ext4-cwm Pit File - s1_odin_20100803.pit Pressed start, all went fine, said passed, took about 3 seconds... went into clockworkmod and said it failed md5 something... What did i do wrong? Tried it again? Do you have plenty of room on your microSD? P
Guest angamb Posted January 28, 2011 Report Posted January 28, 2011 I am so excited that this is being developed! I will probably wait til the online kitchen however, not that I am afraid to try a BETA but my Tab is in daily use right now and I want a stable version. EXCELLENT work so far Paul though matey :lol:
Guest rinaldos Posted January 28, 2011 Report Posted January 28, 2011 Hm, i tried a full restore, and after i updated the non-wipe Version again. I will leave a reply :-) Thanks for your fast reply. rinaldos I reinstalled the ROM, and after deleting the Account Information, and renew the Account, the MailClient works with my Exchange Server. But now the Mailclient, doesn't show any other folders than the inbox Folder :-( This Error I have had with the original Samsung ROM. After your beta 1, the Mailclient works. Maybe I wait for beta 3 :-) I also see, that in beta2 are fewer syncronise (Push, working time) Options for the Mail Client than in the beta1. But thank you, for your fast reply. Gruß Ingo
Guest clockwork_LS Posted January 28, 2011 Report Posted January 28, 2011 I did not use a pit file at all?? I dont even know what one does lol.. Flashed the r3 using odin , rebooted into recovery and it did the ext4 conversion (with an SD card inserted with plenty of room)... DONE! This is what i get in Clockworkmod v3.0.0.0 Checking /system... E:failed to mount /system (Invalid argument) /system may be rfs. Checking... Checking /data... Checking /datadata... E:failed to mount /datadata...(Invalid argument) /datadata may be rfs. Checking... Checking /cache... E:failed to mount /cache (Invalid argument) /cache may be rfs. Checking... Done! E:failed to mount /cache (Invalid argument) E:can't mount /cache/recovery/command E:failed to mount /cache (Invalid argument) E:can't mount /cache/recovery/log E:can't open /cache/recovery/log E:failed to mount /cache (Invalid argument) E:can't mount /cache/recovery/last_log E:can't open /cache/recovery/last_log E:failed to mount /cache (Invalid argument) Thanks in advance for your help P.S. 8GB sd card, nothing on system, did a wipe of internal storage before commencing.
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 I am so excited that this is being developed! I will probably wait til the online kitchen however, not that I am afraid to try a BETA but my Tab is in daily use right now and I want a stable version. EXCELLENT work so far Paul though matey :lol: FWIW, I think Beta 2 is stable and r1 will probably have minimal changes (kitchen aside). P
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 Strange, can you see your SD card OK in clockworkmod? e.g. from 'apply update zip'? P
Guest clockwork_LS Posted January 28, 2011 Report Posted January 28, 2011 (edited) Strange, can you see your SD card OK in clockworkmod? e.g. from 'apply update zip'? P yep and i have the beta 1 zip on there, should i try to flash that? the first time it happened i tried to go back to the restore, the backup it automatically performed prior to running the script for ext4, and it wont let me, so im stuck in clockworkmod and cant boot into anything but download mode or clockwork mod... Edit: Should i just flash an entire rom, cos i cant do anything, it wont let me delete, reset, i think this thing is done for... only had it two weeks. Edit 2: Found work around, flashed entire jm6 rom using odin... now back to starting point. at least it works now Edited January 28, 2011 by clockwork_LS
Guest trektech Posted January 28, 2011 Report Posted January 28, 2011 (edited) after updating from Beta 1 to Beta 2, my tab seems to vibrate like I always press the home button.. NOTE: after clearing the data of swype, my problem with vibrating tab is solved.. Edited January 28, 2011 by trektech
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 Camera issue with Beta 2 confirmed - working on a fix. P
Guest blaze23 Posted January 28, 2011 Report Posted January 28, 2011 After updating to beta 2 swype isn't working. The keyboard comes up,the device vibrates twice and then the keyboard disappears.
Guest Paul Posted January 28, 2011 Report Posted January 28, 2011 Enter Settings -> Applications and 'Clear Data' on Swype. This is due to effectively 'downgrading' Swype to get the full width version. P
Guest DazColl Posted January 28, 2011 Report Posted January 28, 2011 Hi Paul, Any idea if the settings app has issues in Beta 2? I've been running Alpha2 + Kernal r2 for a couple of days no probs. Upgraded to Beta2 + Kernal r3 today and now when I go into settings/display/brightness I get a "Sorry! The application settings has stopped unexpectedly. Please try again. Force Close" message. Is it something I've done? If so, any idea how I resolve it? I don't mind doing a full reset/format if required, but could do with a nudge on how to achive that properly. Loving your work. ;)
Guest blaze23 Posted January 28, 2011 Report Posted January 28, 2011 Hi Paul, Any idea if the settings app has issues in Beta 2? I've been running Alpha2 + Kernal r2 for a couple of days no probs. Upgraded to Beta2 + Kernal r3 today and now when I go into settings/display/brightness I get a "Sorry! The application settings has stopped unexpectedly. Please try again. Force Close" message. Is it something I've done? If so, any idea how I resolve it? I don't mind doing a full reset/format if required, but could do with a nudge on how to achive that properly. Loving your work. ;) Im getting this problem as well. Also power saving mode doesn't appear to be working anymore. The screen looks the same with it on and off.
Recommended Posts