Guest Da Phoenix Posted March 2, 2011 Report Posted March 2, 2011 I have sent a message to speedfrog asking if we can get a sub-forum for android :huh: That would be a good idea. Now android works on my Phone. I'm going to "install" android on my classmates phones
Guest t.i.m.a.a.2k Posted March 2, 2011 Report Posted March 2, 2011 so android works quite well for an early beta and key mapping is kinda fine after a few fixes.. but how do you guys get the screen to turn after sliding the keyboard? i know the sensors are not working but maybe there is a something that causes the screen to turn by moving the keyboard under android?
Guest centodue Posted March 2, 2011 Report Posted March 2, 2011 i can not follow you i have the same setup - but winmobile will never see my ext4 partition :huh: if you say ' when I use android it installs every market sw in SD_CARD0' you probably mean SD_CARD0/download ?! this is just the download-folder ... they should be installed on /data/app/ - like mine do I was saying that if I download some tools using market I found new folders (with the name of the program) in the root of the SD_CARD0. But I would like that all this folders should be created in SD_CARD1. At the moment the second partition (SD_CARD1) created just to separate android folders and Windows Mobile folders remains empty :) Is there the possibility to do so? for example, I would like to have dual boot and I must insert default.txt haret.exe zImage in SD_CARD0 because if I use SD_CARD1 partition (as I would like to do) the program "Gen_Y_Dual_Boot" doesn't detect the presence of android installed. so android works quite well for an early beta and key mapping is kinda fine after a few fixes.. but how do you guys get the screen to turn after sliding the keyboard? i know the sensors are not working but maybe there is a something that causes the screen to turn by moving the keyboard under android? to rotate keyboard you can use RotateD downloading it by Market Two Icons: - RotateL (for landscape) - RotateP (for Portrait)
Guest t.i.m.a.a.2k Posted March 3, 2011 Report Posted March 3, 2011 ok thanks^^ new issue: is there anyway to calibrate the sensor? its hard to control doodle jump when the accelometer is so sensitive
Guest Da Phoenix Posted March 5, 2011 Report Posted March 5, 2011 Is there a way to use your SD Card in Android. When I format in Android nothing happens. When I format in Windows 7 I lost Android. And my GPS isn't working while it's on. Could someone help me?
Guest ErnstJanF Posted March 6, 2011 Report Posted March 6, 2011 Is there a way to use your SD Card in Android. When I format in Android nothing happens. When I format in Windows 7 I lost Android. And my GPS isn't working while it's on. Could someone help me? The SD-card should work.. Maybe you have a 1GB card? Mine is like: partition 0: 1GB FAT partition 1: 1GB ext2 (android)
Guest kaspy Posted March 6, 2011 Report Posted March 6, 2011 I need help. I'm trying to install android but i always have the same problem and i tried a lot of ways but no luck. When i click run on o2beta and start the installation process i get this message: mount: mounting /dev/block/mmcblk0p5 on /sd card failed no such device or address "cant mount internal flash!!!!! i tried to change the default.txt and i formated the sd on ext2, but no luck. I also tried to format on fat32, but always the same message. Anyone knows how to fix this problem? Thanks a lot!!!
Guest gauravv Posted March 6, 2011 Report Posted March 6, 2011 I need help. I'm trying to install android but i always have the same problem and i tried a lot of ways but no luck. When i click run on o2beta and start the installation process i get this message: mount: mounting /dev/block/mmcblk0p5 on /sd card failed no such device or address "cant mount internal flash!!!!! i tried to change the default.txt and i formated the sd on ext2, but no luck. I also tried to format on fat32, but always the same message. Anyone knows how to fix this problem? Thanks a lot!!! i guess you are installing on mystorage???? if yes then when you create partitions...always make fat32 partition first then ext2.....that is important.....
Guest kaspy Posted March 6, 2011 Report Posted March 6, 2011 i guess you are installing on mystorage???? if yes then when you create partitions...always make fat32 partition first then ext2.....that is important..... well actually iam installing it on sd card , but i have lost the 512 mb partion on the mystoage any way to get it back , i have already flashed nbo,csc and eboot, but that didnt helped
Guest gauravv Posted March 6, 2011 Report Posted March 6, 2011 well actually iam installing it on sd card , but i have lost the 512 mb partion on the mystoage any way to get it back , i have already flashed nbo,csc and eboot, but that didnt helped flash full mst..it will be back....dont worry.......i have more problems than you...as my lock key is not working....so in winmo is doesnt sleep and in android whenever i open a app it makes back command automatically......:(
Guest kaspy Posted March 7, 2011 Report Posted March 7, 2011 hi all ,,, well i have strange problem now, when i install the android on the sd card with ext2 install goes fine , no errors, after i run haret in mystorage to run android , it goes fine till IPC transfer start , after that it doesnt show the android screen , but reboots the phone , i have tried many times but no help .
Guest centodue Posted March 7, 2011 Report Posted March 7, 2011 Sorry but I never tried to install on SD card so I don't know :( But is only mine the problem of NO wake up sometimes with new o2b2update.tar.gz with sensor??? This problem was solved when I used CPUboost, Advanced Taskmanager and autokiller memory optimizer But now using them the preoblem continue to be present in random way. :( :) ;)
Guest kaspy Posted March 7, 2011 Report Posted March 7, 2011 well the restart problem was solved by installing 3d drivers at first boot
Guest centodue Posted March 11, 2011 Report Posted March 11, 2011 well the restart problem was solved by installing 3d drivers at first boot ops...it was so simple that i thought you made it already! For everyone : first ext2.tar.gz second o2bupdate (2D/3D driver...necessary absolutely for B7610) launch android the first time restart android after first procedure switch off again android with switch off command (using keys) install o2b2update and (change zImage with the new one)
Guest digvijay Posted March 23, 2011 Report Posted March 23, 2011 the 2d/3d driver update doesnt work for me on beta2... it still gives the reboot after a couple of seconds after ok!ipc transfer start! even i hav the same problem ...!!! m struk over it...!!
Guest Princeagarwal Posted March 23, 2011 Report Posted March 23, 2011 finally succeeded in running android on my b7610 all thanx to ernst if anyone is having problems installing beta 2 pm me
Guest Athlos Posted March 24, 2011 Report Posted March 24, 2011 even i hav the same problem ...!!! m struk over it...!! Did you rename o2bupdate to o2b2update? Had the same prob and this fixed it. GL
Guest shaysus Posted March 26, 2011 Report Posted March 26, 2011 Where can i find the 2D/3D drivers since they arent on the official downloadpage? thankx in advance
Guest ErnstJanF Posted March 26, 2011 Report Posted March 26, 2011 Attached are the 2D/3D Driverso2b2update.tar.gz
Guest harsheen Posted March 26, 2011 Report Posted March 26, 2011 (edited) so uhm.. evrything worked.. it installed properly on my storage.. it even rebooted properly but when i tried runnning haret.exe. from my storage it shows all that writing bt it reaches a certain point and just stops,.. how long is it supposed to take?? any thoughts? did this happen to anyone else?? please help :D :D Edited March 26, 2011 by harsheen
Guest shaysus Posted March 26, 2011 Report Posted March 26, 2011 I got the o2beta running, got the 2d/3d drivers from Ernst (many thankx) and i downloaded the Kernel-B7610-GC-REV29.zip I followed the steps of installation ( untar, 2d/3d, boot, GC rev29.zip ) But i get many 'force close' Cam doens't open. Anybody encouter something like this and found a solution? Oh and i get allot of chinees signs when T9 is on :D
Guest harsheen Posted March 27, 2011 Report Posted March 27, 2011 ok so now the android logo comes but it just stays there.. then after around 5 mins it says not responding and shows 2 options.. force close and wait.. both the options turn of the phone :/ :/ please help :D :D
Guest harsheen Posted March 27, 2011 Report Posted March 27, 2011 hi all ,,, well i have strange problem now, when i install the android on the sd card with ext2 install goes fine , no errors, after i run haret in mystorage to run android , it goes fine till IPC transfer start , after that it doesnt show the android screen , but reboots the phone , i have tried many times but no help . thats happening to me but after IPC transfer start.. i waited fr a bit the andriod screen comes but it doesnt moove on from there?? ? any thought? how did you make your work???
Guest ErnstJanF Posted March 27, 2011 Report Posted March 27, 2011 thats happening to me but after IPC transfer start.. i waited fr a bit the andriod screen comes but it doesnt moove on from there?? ? any thought? how did you make your work??? Install 2D/3D drivers? :D
Guest harsheen Posted March 27, 2011 Report Posted March 27, 2011 Install 2D/3D drivers? :D post a link for the 2D/3D drivers please :D and i just copy the file onto the root of mystorage and it should work??
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now