[ROM] CyanogenMod 6.1 [Beta2 - 05 Feb 11] & 7 [Beta3 - 11 Feb 11]

[Guest evilpaul]

Hey guys, just formatted everything then went to install fiblesama's 4.1 rom and it said it failed and I'm stuck on green android! :"( anyone know what to do, i'm meant to go out in a bit! :"(

What version of recovery are you using, and if you pull the battery can you get back into recovery by holding volume- during bootup?

[Guest punkmilitia]

What version of recovery are you using, and if you pull the battery can you get back into recovery by holding volume- during bootup?

Thank you so much for the reply - yes I can go back into clockwork by holding volume down at startup but I never backed up.. :"(

EDIT: V3.0.0.5

Edited February 15, 2011 by punkmilitia

[Guest skyhacker]

Try to wipe first

Edited February 15, 2011 by skyhacker

[Guest punkmilitia]

Try to wipe first

did a wipe but it keeps aborting, flb installs ok though!

[Guest evilpaul]

Thank you so much for the reply - yes I can go back into clockwork by holding volume down at startup but I never backed up.. :"(

EDIT: V3.0.0.5

In recovery go into "mounts and storage" and make sure you format boot, system, data and cache.

Then go to "install zip from sdcard" and then "toggle script asserts" and ensure the asserts are disabled.

Then "choose zip from sdcard" and install the cyanogenmod7.zip.

If you have used ext2sd before, then it can cause issues. If so, then make sure you format the sdcard before rebooting the system.

The above steps will clear all data on the system, but should get you to a nice place where the system will boot.

[Guest MDCFan]

Just restore your backup using recovery.

[Guest punkmilitia]

In recovery go into "mounts and storage" and make sure you format boot, system, data and cache.

Then go to "install zip from sdcard" and then "toggle script asserts" and ensure the asserts are disabled.

Then "choose zip from sdcard" and install the cyanogenmod7.zip.

If you have used ext2sd before, then it can cause issues. If so, then make sure you format the sdcard before rebooting the system.

The above steps will clear all data on the system, but should get you to a nice place where the system will boot.

(Status 7)

Installation aboreted

happened after following all those steps - could it be because i'm using Sebastian404's 3.0.0.5 CW instead of TomG's? I don't know how on earth I can install tom's .img instead of an update.zip..

[Guest cooldfuzion]

Can enyone please say to me were to get honeycomb theme to CM7??

[Guest exec]

Can enyone please say to me were to get honeycomb theme to CM7??

http://forum.xda-developers.com/showthread.php?t=943423

Download and install the .apk and choose the theme in Theme Chooser. :D

[Guest ZforZelda]

(Status 7)

Installation aboreted

happened after following all those steps - could it be because i'm using Sebastian404's 3.0.0.5 CW instead of TomG's? I don't know how on earth I can install tom's .img instead of an update.zip..

simply use the fastboot method mentioned in Sebastian404's thread

[Guest exec]

simply use the fastboot method mentioned in Sebastian404's thread

Or he can use Recovery Manager app to install Tom's .img-file, that's what I did.

[Guest evilpaul]

simply use the fastboot method mentioned in Sebastian404's thread

Detailed instructions can be seen in the first post of this thread:

http://android.modaco.com/content/zte-blad...-the-zte-blade/

Follow guide number 5.

[Guest macher]

I have on Cm7 beta 4.1 still blank screen after calling, any fix for it?

[Guest]

angry birds force closes

Move to internal memory :D

Edited February 15, 2011 by Guest

[Guest cooldfuzion]

http://forum.xda-developers.com/showthread.php?t=943423

Download and install the .apk and choose the theme in Theme Chooser. :D

Thanks mate, i love this theme on Blade :D thanks again

OffTopic: did you guys see the new ZTE Skate that will be released sometime next month.

A generous 4.3-inch display 480x800, and is powered by a 800MHz Qualcomm-made chipset, plus a Adreno 200 GPU. There's also a 5 megapixel camera with LED flash on the back, along with the usual Bluetooth, A-GPS, and WiFi bundle. Check the

source:

Very nice :)

Edited February 15, 2011 by cooldfuzion

[Guest rayraven]

^Too big for my taste, hopefully we'll have official cyanogenmod by then, as i'm guessing most devs will move over to it.

Liking the 10inch ZTE tablet though.

[Guest cooldfuzion]

I will buy a table when ZTE realeased a Honeycomb one!

A question for those that have bought a Blade, how mutch did it cost in your country?

[Guest andycanada]

I will buy a table when ZTE realeased a Honeycomb one!

A question for those that have bought a Blade, how mutch did it cost in your country?

bought the blade in Switzerland for 100CHF + 15CHF for the sim card = 120USD

[Guest harry_m]

How you get wifi-tethering (mobile hotspot) on CM7 ...

1.) You need the "hostapd"-binary from any 2.2-rom (for the zte blade) - it's located in /system/bin (extract it from a update-zip-file).

2.) Now copy the hostapd-binary to /system/bin

adb remount

adb push hostapd /system/bin/.

adb shell chmod 0755 /system/bin/hostapd

3.) Install wifi/wireless-tether from the google-code page - I recommend the latest experimental version (version 3): http://code.google.com/p/android-wifi-tether/downloads/list This version comes with/supports a toggle-widget, infrastructure/master-mode, wpa-encryption, access-control ... and other useful stuff like mss clamping ... IT'S NOT AD-HOC!

adb install wifi_tether_v3_0-pre5.apk

I'm sure it will be integrated into CM7 soon ... but in the meantime ...

Happy Tethering!

Edited February 15, 2011 by harry_m

[Guest leetron1]

Just cannot get Flib ROM beta4.1? to install..used various recoverys, always wipe, toggle asserts to disable= error status 7

[Guest]

How you get wifi-tethering (mobile hotspot) on CM7 ...

1.) You need the "hostapd"-binary from any 2.2-rom (for the zte blade) - it's located in /system/bin (extract it from a update-zip-file).

2.) Now copy the hostapd-binary to /system/bin

adb remount

adb push hostapd /system/bin/.

adb shell chmod 0755 /system/bin/hostapd

:D lp 3.) Install wifi/wireless-tether from the google-code page - I recommend the latest experimental version (version 3): http://code.google.com/p/android-wifi-tether/downloads/list This version comes with/supports a toggle-widget, infrastructure/master-mode, wpa-encryption, access-control ... and other useful stuff like mss clamping ... IT'S NOT AD-HOC!

adb install wifi_tether_v3_0-pre5.apk

I'm sure it will be integrated into CM7 soon ... but in the meantime ...

Happy Tethering!

Just what I needed :D

All I need now is USB tethering and would use cm7 as everyday Rom

Edited February 15, 2011 by Guest

[Guest Chris_M]

I installed Flibble's Beta 4.1 build last night, and I've been completely blown away by the extra speed and functionality compared with the ZTE-based ROMs. Thanks to all the devs for your hard work!

Having said that, I've noticed a couple of bugs which will need to be ironed out before this ROM is ready for everyday use.

1) My alarm failed to go off this morning - it vibrated continually, but there was no sound and the screen would not respond. I had to remove the battery to recover.

2) Occasionally I get a blank screen after a call - I assume it's the proximity sensor not realising I've taken the phone away from my ear. To end the call, I have to remove the battery.

3) Selecting "Settings / CyanogenMod Settings / Performance / CPU Settings" crashes the application.

4) After exiting a GPS application, the GPS icon sometimes stays on the notification bar. This looks like a known CM issue which was fixed yesterday, so hopefully newer builds won't suffer from this problem.

Other than that, it's utterly brilliant... :D

Hopefully this info will be useful to anyone who's thinking about trying out the beta ROMs. I'm looking forward to the Blade being added to the CM repository so we can start getting nightly builds!

Edited February 15, 2011 by Chris_M

[Guest richardkemp]

Thanks for the upload Flibblesan.

Though it is much smoother and fully functional than previous uploads in this thread, I find that contrary to what others said above my screen will not wake after calls.

I'm curious what the difference between the content here and metzench's BBlack mod is since he hasn't spelled it out in his thread. Don't have time to test another now though.. back to JJ9 for the moment.

[Guest RipZ]

I have on Cm7 beta 4.1 still blank screen after calling, any fix for it????

without this fix phone IS NOT USABLE! many peoples write about it, but where are no comments about this from developers!

[Guest exec]

I have on Cm7 beta 4.1 still blank screen after calling, any fix for it????

without this fix phone IS NOT USABLE! many peoples write about it, but where are no comments about this from developers!

It is a known problem and the ROM is still in beta, just wait.