Guest zombolo Posted February 14, 2011 Report Posted February 14, 2011 Is 1..2.11 ENGLISH PACK #1b already included?
Guest zorginho Posted February 14, 2011 Report Posted February 14, 2011 Quote... plz release kernel sources! The other good roms can have the full hw working too
Guest kenelm Posted February 14, 2011 Report Posted February 14, 2011 Hope you can release the kernel source code :D
Guest TheShak Posted February 14, 2011 Report Posted February 14, 2011 Sorry to be a wet sponge on this, but before asking for releaseing code, it would better to get feedback on what works and indeed if the fixes are there... looking forward to positive confirmation on the fixes etc. Thanks Truecolor (aka Phoenix?)
Guest eiben_robert Posted February 14, 2011 Report Posted February 14, 2011 Sorry to be a wet sponge on this, but before asking for releaseing code, it would better to get feedback on what works and indeed if the fixes are there... looking forward to positive confirmation on the fixes etc. Thanks Truecolor (aka Phoenix?) I flashed yesterday and used it for about 3 hours. I can not give a detailed opinion however the rom is very smooth, no obvous bugs, english ok, light and proximity sensors seemed Ok. Main item was battery drain (again some 10% per hour). As I was running low on battery I reverted to another rom via nandroid. Looking on the status of custom kernels these days, main remaining issues are bluetooth (partially working), battery drain and prox/light sensors (although these are more or less patched).
Guest Edward.W Posted February 14, 2011 Report Posted February 14, 2011 I flashed yesterday and used it for about 3 hours. I can not give a detailed opinion however the rom is very smooth, no obvous bugs, english ok, light and proximity sensors seemed Ok. Main item was battery drain (again some 10% per hour). As I was running low on battery I reverted to another rom via nandroid. Looking on the status of custom kernels these days, main remaining issues are bluetooth (partially working), battery drain and prox/light sensors (although these are more or less patched). Proximity sensor works? that's a great news, maybe it can add into the MIUI Rom made by MarkII :D
Guest zombolo Posted February 14, 2011 Report Posted February 14, 2011 An almost perfect rom. No bugs until now. I did not test bluetooth audio yet.
Guest ranieri55 Posted February 14, 2011 Report Posted February 14, 2011 for me its proximity sensor works if you make short calls are long while if the screen does not return
Guest Lens_flare Posted February 14, 2011 Report Posted February 14, 2011 Ehh same bug.. and some bugs with bt(damn wireless interface :D). But all other just pretty cool.
Guest truecolor Posted February 14, 2011 Report Posted February 14, 2011 It says you fix lightsensor in kernel, are there more things you fix in kernel? Could you release code for all your fixes? :D I would love to include the in our kernels :D) I sent you a message.
Guest truecolor Posted February 14, 2011 Report Posted February 14, 2011 Proximity sensor works? that's a great news, maybe it can add into the MIUI Rom made by MarkII :D light Sensor Works Fine ,Proximity works fine on my device(but someone said, when calling screen would turn off ,and can't be turn on until call ended ,but haven't gei me log ,so i can't debug )
Guest truecolor Posted February 14, 2011 Report Posted February 14, 2011 Acer Robots on the bootscreen means that you use Acer kernel? Are you legendary Phoenix from bbs.gfan? I love your work thanks for all that you've done. Super MIUI! Can you port something like Sense HD? Just Use The Picture,Truecolor Is phoenix's vest,if i have enough time ,i'll try .
Guest dragonhk Posted February 14, 2011 Report Posted February 14, 2011 (edited) As a Chinese, I am proud of you. This is really an excellent Tom. But I have some problem. 1. The sensibility for the rom is too high for me. Please restore to default tin next Tom if possible. 2. The screen can not tune off automaticaly SOMETIMES. despite power off manually to switch off the screen. I change time out already but doesn't work Edited February 14, 2011 by dragonhk
Guest famiddi Posted February 14, 2011 Report Posted February 14, 2011 What about screen rotation and pc connection as storage?
Guest truecolor Posted February 14, 2011 Report Posted February 14, 2011 As a Chinese, I am proud of you. This is really an excellent Tom. But I have some problem. 1. The sensibility for the rom is too high for me. Please restore to default tin next Tom if possible. 2. The screen can not tune off automaticaly. despite power off manually to switch off the screen. I change time out already but doesn't work 1.i'll try to remove unused menu from official miui,and than add some liquid set menu. 2.i have tested on my device,the screen can tun off automatic,did you wipe all correct?
Guest truecolor Posted February 14, 2011 Report Posted February 14, 2011 What about screen rotation and pc connection as storage? screed rotation works fine,pc connection as storage sometimes has problems,but reboot device will be ok.
Guest eiben_robert Posted February 14, 2011 Report Posted February 14, 2011 Hello Truecolor, What battery life do you have on your device with this ROM, especially on standby? As I mentioned earlier my battery dropped 10% / hour in standby (3g data and sync enabled, installed on stock after wipe all). Thanks Robert
Guest truecolor Posted February 14, 2011 Report Posted February 14, 2011 Hello Truecolor, What battery life do you have on your device with this ROM, especially on standby? As I mentioned earlier my battery dropped 10% / hour in standby (3g data and sync enabled, installed on stock after wipe all). Thanks Robert on my device about 4%/hour in standby(2g data, sync disable), my baseband is A1-05.01.05
Guest dragonhk Posted February 14, 2011 Report Posted February 14, 2011 What about screen rotation and pc connection as storage? Work perfectly. It can recognize ext
Guest Gryx Posted February 14, 2011 Report Posted February 14, 2011 My screen always get directly black again like 1 second, i cant do anithing now , how can i fix this
Guest koudelka Posted February 14, 2011 Report Posted February 14, 2011 on my device about 4%/hour in standby(2g data, sync disable), my baseband is A1-05.01.05 oh, that's not good :D we can probably improve this to ~1%/hour (maybe < 1%). I sent email to you.
Guest Güilzom Posted February 15, 2011 Report Posted February 15, 2011 There is a way to use the choco kernel without overwrite the working proximity sensor ??
Guest yz2365 Posted February 15, 2011 Report Posted February 15, 2011 确实耗电量很大 希望你可以和koudelka合作把耗电量降下来 这样就完美了 Indeed a great power I hope you can koudelka cooperation to power down so perfect GOOGLE
Guest Lens_flare Posted February 15, 2011 Report Posted February 15, 2011 oh please.. lone path is the Tool that he used to blown out our community :D Just give him some month to reach perfectness. Then we can ask him for join.
Guest DevilStars Posted February 15, 2011 Report Posted February 15, 2011 oh, that's not good :D we can probably improve this to ~1%/hour (maybe < 1%). I sent email to you. i have 0.5%/hour (HSDPA on, wifi off, sync off). I think it's good enough (:
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now