Jump to content

Stock OC kernel V2 (for Acer based rom)


Guest rithchen

Recommended Posts

trying to enable compcache gives me busybox: permission denied?!?! what i have done wrong :D

had to maually download busybox from the market place.... then I had to use root explorer to copy and paste it in system/xbin since i didn't have adb setup on my pc and since busybox couldn't do it for me.

but now it gives me other errors. but in setcpu it looks as if the swap is already running... see my eariler post for the errors i am getting when i try to run the script on gscript lite

Link to comment
Share on other sites

Guest eiben_robert
trying to enable compcache gives me busybox: permission denied?!?! what i have done wrong :D

Install busybox from market. This solved the issue for me

Link to comment
Share on other sites

Guest HustlinDaily
Just flashed 960 on t&l, and it started to work like a charm but after a while, random reboot after random reboot! Any solution? SHould I try another CPU speed?

Try 921 or 883. Not all Liquids are stable at speeds higher than that (I think all are at 921 but not 100% sure. It is luck of the draw, some can run at 1036, mine goes crazy at anything higher than 998)

Link to comment
Share on other sites

flashed the 998 version with compcache script i made more than 1400 on quadrant and more than 30 on linpack.

Great job!

Sorry for my english

really? I don't get past 630 or something with default clock speed.

/italian

io non vado oltre i 630, davvero fai 1400??? Mi sa che non ho abilitato tutto a sto punto.... sono a frequenza standard però

Edited by uzirox
Link to comment
Share on other sites

Guest toroseduto84
really? I don't get past 630 or something with default clock speed.

/italian

io non vado oltre i 630, davvero fai 1400??? Mi sa che non ho abilitato tutto a sto punto.... sono a frequenza standard però

yes, i'm on t&l with the speed set on 921mh compcache actived by the script. that was the best average is 1100/1200.

/italian

si con la rom t&l kernel 998 ma settato a 921 e compache attivato, con la frequenza di default (768) non credo ci arrivi a quei livelli. il telefono sembra stabile così impostato

Link to comment
Share on other sites

Guest Armisael
really? I don't get past 630 or something with default clock speed.

/italian

io non vado oltre i 630, davvero fai 1400??? Mi sa che non ho abilitato tutto a sto punto.... sono a frequenza standard però

My results:

LCR F 2.0 + OC 921 = 900-1100

T&L Gingerbread + Quadrant Patch + OC 921 = 1800+

/italian

non chiedermi perchè questa differenza... la patch quadrant pare non funzionare correttamente su LCR comunque (almeno a me non va)

Link to comment
Share on other sites

Guest Edward.W
My results:

LCR F 2.0 + OC 921 = 900-1100

T&L Gingerbread + Quadrant Patch + OC 921 = 1800+

/italian

non chiedermi perchè questa differenza... la patch quadrant pare non funzionare correttamente su LCR comunque (almeno a me non va)

What do you mena thr" Qudrant Patch"? you mean the Fix from the ACER? :D

Link to comment
Share on other sites

Guest Edward.W
Yeah it is Acer's fix edited to work on 4.002.14.

Can you guys post Smartbench results instead? I don't trust Quadrant.

Can you provide a link for me to look around, since I only found the patch for 4.003 one :D

Link to comment
Share on other sites

Great job....

I flashed 998MHz on top of t&l. So far it is work great.

Linpack score around 32.

Quadrant score around 15500.

hi, but apps2sd old metod, work?

thanks

Link to comment
Share on other sites

I've flashed 921 MHz LCRF 2.0 on LCRF 2.0 and with with setcpu in performance mode smartbench 2010 says 926/945 and quadrant 1006, better then stock but not amazing...

All other stuff working.. wifi ext2 partition ecc..

thanks a lot for your work and if there is a paypal I will offer you a beer

Edited by siggey
Link to comment
Share on other sites

sorry, i didnt understand it :D

but i tryed this new kernel and it still has problems with inverted axys :D

so in the end multitouch fix it's still not so effective....

Link to comment
Share on other sites

Guest fear_factory84
Hey fear_factory/ritchen, awesome work. Trying out the 921MHz one right now (flashing while typing).

When you have time, would it be possible to create a 998MHz one for LCR-F? Thanks in advance.

Here it is http://www.multiupload.com/TLENMTLQW6

I haven't tested it as my device reboot itself at 998mhz.

not if you use no frills;)

What is no frills?

Link to comment
Share on other sites

Guest eiben_robert

How is your battery life with this kernel?

I use stock froyo+ 883 OC + compcache + SWAP +3g and sync on and get approx 5% battery drain / hour in standby. How about you? Any tips to improve it?

Edited by eiben_robert
Link to comment
Share on other sites

Guest elbartoo
Try 921 or 883. Not all Liquids are stable at speeds higher than that (I think all are at 921 but not 100% sure. It is luck of the draw, some can run at 1036, mine goes crazy at anything higher than 998)

Thx! I flashed 921, and it's perfect. I'm part of the unlucky:)

Link to comment
Share on other sites

Guest fear_factory84
How is your battery life with this kernel?

I use stock froyo+ 883 OC + compcache + SWAP +3g and sync on and get approx 5% battery drain / hour in standby. How about you? Any tips to improve it?

battery is not too good also for me with 921mhz + compcache enabled.. I should check why..

on battery usage menu, percentages are normal :D

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.