Guest rithchen Posted February 24, 2011 Report Posted February 24, 2011 New one Not working with lcr 2.0 bootloop I add one for LCR ROM, you can test it :huh:
Guest xdxdxdxdxdx Posted February 24, 2011 Report Posted February 24, 2011 (edited) I add one for LCR ROM, you can test it :huh: i had test it on lcrf2.0,the four light in the bottom couldnt turn on.what was wrong??? —————————— ignore me…… Edited February 24, 2011 by xdxdxdxdxdx
Guest the red blue blur Posted February 24, 2011 Report Posted February 24, 2011 will this work on Cm7 ? (latest) I am after the fast dormancy feature? CM7 is OCed already. :huh:
Guest rithchen Posted February 24, 2011 Report Posted February 24, 2011 i had test it on lcrf2.0,the four light in the bottom couldnt turn on.what was wrong??? —————————— ignore me…… Can you describe more detail? Does it was happened at boot up time, or after?
Guest Joshuah Posted February 24, 2011 Report Posted February 24, 2011 CM7 is OCed already. :huh: I was asking about the fast dormancy ??
Guest xdxdxdxdxdx Posted February 24, 2011 Report Posted February 24, 2011 Can you describe more detail? Does it was happened at boot up time, or after? it alway off when i touch it.but system has respond.but it doesnt matter.it works now.:huh:
Guest galock Posted February 24, 2011 Report Posted February 24, 2011 (edited) 6. I have battery drain fast problem! I think it was caused by compcache. (After many days test, the battery drain was caused by swap thrashing. So, at this moment the only thing we can do is change swapiness value) hello thx for the amazing work 4 questions: 1) how to change swapiness value? and which value is the optimal one in order to minimize battery drain? 2) is it possible to switch on compcache but to switch off swap? 3) is it possible to switch on compchache by the last version of liquid settings? 4) in setcpu there is a profile called powersave. what does it do? is it effecive in order to contain battery drain because of OC? thx a lot galock Edited February 24, 2011 by galock
Guest max2rock Posted February 24, 2011 Report Posted February 24, 2011 New one Not working with lcr 2.0 bootloop
Guest max2rock Posted February 24, 2011 Report Posted February 24, 2011 (edited) Sorry for the double post :huh: Edited February 24, 2011 by max2rock
Guest Wicky08 Posted February 24, 2011 Report Posted February 24, 2011 Hi ritchen could you please upload sources and your config somewhere? I'm trying to build a custom kernel for acer based rom since days but I got many problems with koud/roggin/thepasto kernels, since they are a bit too different from stock acer one.. I would like to build cifs module, and set clock speed to default 768000 still allowing higher frequencies via setcpu (editing msm frequency tables like phh did).... Thanks in advance! Attached is boot.img, 883mhz with lcr-f 2.0 ramdisk.. just unpacked and repacked with koud's perl scripts :huh: headset works and also wifi with acer provided module.. great! i have flashed oc_lcr.zip ,and it can boot but the max cpu freq is always 245,the same to the min freq. i must use setcpu to reset the max freq to 768(768 is the max) after it boot everytime, can your new boot.img solve the problem? and i have comfirm that this kernel can use ext2 and swap!
Guest rithchen Posted February 24, 2011 Report Posted February 24, 2011 New one Not working with lcr 2.0 bootloop Did you use oc_lcr.zip? It's so strange, some people say it works, and others say it's not?
Guest rithchen Posted February 24, 2011 Report Posted February 24, 2011 (edited) hello thx for the amazing work 4 questions: 1) how to change swapiness value? and which value is the optimal one in order to minimize battery drain? 2) is it possible to switch on compcache but to switch off swap? 3) is it possible to switch on compchache by the last version of liquid settings? 4) in setcpu there is a profile called powersave. what does it do? is it effecive in order to contain battery drain because of OC? thx a lot galock 1. You can look at first page, in compcache section i add command to change swapiness value. In theory, if your system install lots apps, you need to change this value lower. Because android system always load as much programs as your memory can keep, it will fill not most use app to swap. And when you execution a hung memory app, the system will kill the programs you preload before. So your swap will very busy, and always do compresss and decompress, it use lots battery. 2. compcache is one kind of swap, but it will compress the memory data before swap in to save more swap space, and the swap storage is in your memory. 3. I didn't try this app yet, so i can't tell :huh: 4. In SetCPU, you can change CPU scaling government. If you choose performance, then even there is nothing to do, CPU always running at highest frequency as you set. In the other hand, when you choose powersave, it will try use lowerest frequency to operation, so you can save battery. Edited February 24, 2011 by rithchen
Guest fear_factory84 Posted February 24, 2011 Report Posted February 24, 2011 Hi ritchen, I've seen today that you built a new version. Later I'll try to flash it.. Any change to have the source tree with your patches somewhere? Thanks for your work..
Guest abux Posted February 24, 2011 Report Posted February 24, 2011 not working on mui rom :huh: How O.C Mui rom? Anybody knows?
Guest uzirox Posted February 24, 2011 Report Posted February 24, 2011 Note to users: with the OC kernel, the phone boots @ 245-245 Mhz (min-max freq.) so it's VERY laggy. Remember to use SetCpu :huh:
Guest rithchen Posted February 24, 2011 Report Posted February 24, 2011 (edited) Note to users: with the OC kernel, the phone boots @ 245-245 Mhz (min-max freq.) so it's VERY laggy. Remember to use SetCpu :) It's sounds a little strange, it won't boot at that low frequency :huh: I wll check it again! Yes, You are right! I have mistype in one file, and I will upload the fixed kernel. Thanks for your feedback :P Edited February 24, 2011 by rithchen
Guest hkstacker Posted February 24, 2011 Report Posted February 24, 2011 Note to users: with the OC kernel, the phone boots @ 245-245 Mhz (min-max freq.) so it's VERY laggy. Remember to use SetCpu :huh: noticed this as well, very laggy is an understatement lol. I ended bumping it up to 998mhz and my battery life has improved.
Guest mont0 Posted February 24, 2011 Report Posted February 24, 2011 noticed this as well, very laggy is an understatement lol. I ended bumping it up to 998mhz and my battery life has improved. how did you do so? moreover is the tun/tap module working?
Guest hkstacker Posted February 24, 2011 Report Posted February 24, 2011 (edited) how did you do so? moreover is the tun/tap module working? I'm not sure I understand your question, sorry but I'll do my best. I flashed the latest kernel via malez recovery, it booted up at 245mhz, slowly but surely launched setcpu and bumped the clock speed up to 998mhz. Edited February 24, 2011 by hkstacker
Guest rithchen Posted February 24, 2011 Report Posted February 24, 2011 fixed version is uploaded, check first page :huh:
Guest hkstacker Posted February 24, 2011 Report Posted February 24, 2011 fixed version is uploaded, check first page :huh: Thanks, flashed it :)
Guest IareBaboon Posted February 24, 2011 Report Posted February 24, 2011 Thanks rithchen for releasing it without MT patch :huh: downloaded it yesterday. But I still have the same problem. Screen goes crazy. I assume its some sort of hardware problem at this point, as I don't see anyone else having the same problem lol So I'll just stick to stock speeds.
Guest Edward.W Posted February 24, 2011 Report Posted February 24, 2011 I'm not sure I understand your question, sorry but I'll do my best. I flashed the latest kernel via malez recovery, it booted up at 245mhz, slowly but surely launched setcpu and bumped the clock speed up to 998mhz. What is the minimum speed you've set in Setcpu? I just set the minimum value to 245MHz, and set the govorner mode to "SMARTASS" :huh:
Guest reno3d Posted February 24, 2011 Report Posted February 24, 2011 Hi to all, i flashed last update on T&L and app2sd but phone don't boots :|.
Guest hkstacker Posted February 24, 2011 Report Posted February 24, 2011 What is the minimum speed you've set in Setcpu? I just set the minimum value to 245MHz, and set the govorner mode to "SMARTASS" :huh: Min value is the default 245, max is 998.....cool story bro :)
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now