Jump to content

FLB-Froyo G2 for ZTE Blade discussion & help thread


Recommended Posts

Guest GX390
Posted

Amazing rom easily the fastest, most stable rom

Thanks :(

Guest stefanokan
Posted

@ bhf

Thank you very much. :(

Tomorrow morning i'll try and report.

Guest Roo13
Posted
[..]

So, today I literally pulled the plug and let the phone die (power down) on its own and charged it that way over night. Then, the first boot was directly into recovery and i wiped the battery stats.

I guessed, this would help at least the battery life to recover, but guess what. You're right, miraculously the wifi reconnect issue was gone, too. Every time i brought my phone back from sleep, wifi reconnects in seconds. Of course, this procedure helped my battery life, too. Now, 10 hours with very light usage later, I've got 92% battery left, as I used to.

Thanks again for this great piece of ROM, flibble.

Hi,

Your method, which seems quite efficient, isn't alike the most common: http://android.modaco.com/content/zte-blad...bration-protip/ is yours specific to the rom or simply a try you wanted to do..?

I'd really like to do this the right way cause my battery life is really bad: percents fall very fast.

Thx in advance

Posted
is yours specific to the rom or simply a try you wanted to do..?

I'd really like to do this the right way cause my battery life is really bad: percents fall very fast

I've just given the rapid battery drain issue a new approach. I guess, my way is not very specific neither to this ROM nor to the phone. But I haven't tried this method with another ROM or phone. But what I know, this really works. 28 hours after plugging out the charger and with light usage, some push mails, sms and internet 3g my battery life is still at 65%. I'm back in the three day charging cycle. Mission accomplished, yay.

Guest Roo13
Posted
I've just given the rapid battery drain issue a new approach. I guess, my way is not very specific neither to this ROM nor to the phone. But I haven't tried this method with another ROM or phone. But what I know, this really works. 28 hours after plugging out the charger and with light usage, some push mails, sms and internet 3g my battery life is still at 65%. I'm back in the three day charging cycle. Mission accomplished, yay.

Ok, i think i'll give a try to your method, discharging isn't hard, by the end of of the day i think i can manage it..!

Guest Phoenix Silver
Posted

so far rom is great but i have 2 major bugs

1) blade loose network with wifi on

2) phone reboot during navigation

Guest Simon O
Posted
hi

can you just answer 1 simply question.........

HOW TO INSTALL EXTRAS TO MOD 10b ???

Simply procedure please, and safe......

i did install FLB 10b exactly with procedure .....from this post......http://android.modaco.com/content/zte-blade-roms-rom-customisation/329864/26-feb-guide-how-to-install-a-custom-rom-on-the-zte-blade/

Same procedure as you use for flashing a rom through recovery. Just don't wipe anything.

Guest Simon O
Posted
How far off is R11 for release...?

Unknown. Still have some issues I'm trying to sort out.

Guest Lee Black
Posted
so far rom is great but i have 2 major bugs

1) blade loose network with wifi on

2) phone reboot during navigation

I get : phone reboot during navigation with JJ9 and Cyanmod RC2 (i also go this on FLB too)hmmm....

Guest arpakyna
Posted

Still the same problems with superuser occasionally failing to give root access to programs (and once it doesn't, it won't until reboot), using R10b.

Guest targetbsp
Posted (edited)

The version that comes with CM7 works really well. Never gone wrong once. It says Superuser 2.3.6 database version 5, su binary 2.3.1-ef in the version info. Is that the same as with FLB?

Edited by targetbsp
Guest j_u_s_h
Posted

I have problems with the wifi in r10. In the advanced wifi settings I set the "Wi-Fi sleep policy" to Never, so I expect it to be always on. Unfortunately, when it goes to sleep it immediately (I was pinging the ip all the time) disconnects, after it wakes up (the wifi icon in the notification bar is there but without signal) it reconnects immediately.

I've a TFT ZTE Blade with build FLB-Froyo r10 (I did a complete wipe as preivously I'd CM7.0RC2).

If needed I can provide logcat (or other logs).

Btw, when the device is connected to the computer the wifi is not disconnected. It was also working in the CyanogenMod 7.0RC2 and RC1.

I've tried to retrieve the logcat but I'm not able to see enough events to see why the wifi went off.

Feel free to contact me if you want me to provide some logs.

Guest spanner44
Posted

Have upgraded successfully from 8b and the wi-fi seems to be working without any problems, no problem with connecting and it also manages to find and offer to connect to other open networks when I am out and about as well.

Well Done and thanks for your hard work.

Guest arpakyna
Posted (edited)
Appears to be a common problem with superuser 2.3.6.1 - see: ....

Clear the data for the superuser app - it will save you a reboot :D

Thanks for the tip, but that didn't help either once the app has hanged up on getting no root access. Like when Ti backup hangs, you exit it, clear the data on superuser and try it again.. no luck. However other apps like setcpu do work and get the superuser pop-up. I'll try if I can update superuser to newer version if there's one available.

...WiFi is working perfectly with this rom, btw. Thanks Fibble.

Edited by arpakyna
Guest Simon O
Posted
Thanks for the tip, but that didn't help either once the app has hanged up on getting no root access. Like when Ti backup hangs, you exit it, clear the data on superuser and try it again.. no luck. However other apps like setcpu do work and get the superuser pop-up. I'll try if I can update superuser to newer version if there's one available.

...WiFi is working perfectly with this rom, btw. Thanks Fibble.

If you have any issues updating superuser from the market you'll need to install Superuser Fix by chainsdd. It should sort the issues out.

Guest Manbag
Posted

Just to say, thanks so much for your time for doing this. I and many others appreciate your work.

Guest rak007
Posted (edited)

5% drop in overnight from 11 PM to 9 AM. How does it sound ??

Actually at 11 PM last checked battery was at 28% and in morning too it was 28% which surprised me and i am sure something was wrong so i rebooted the phone and it came to 23%

Is this behaviour normal ??

Edited by rak007
Guest Super Ted
Posted

Any reason why I've only got the rooster alarm? The wifi is still pretty buggy on 10b and needs manually switching on multiple times daily. I'm on a uk tft phone using 2.6.32.9. Should I change to a different kernel?

Guest andy9876
Posted

WI FI Tethering issue

Can anyone help please. I have tried WI FI tethering on an XP laptop using the built in tethering feature of the Rom. It works fine with no password. When I try to use a WPA/WPA2 password my laptop asks for a 5 or 13 character WEP password. When I provide one it does not recognise it and link. Am I doing something wrong?

I have downloaded and used the WEP password security based Barnacle App from the market and it works.

Many thanks for your work on the Rom Flibblesan

Guest scoobydoo99
Posted
Any reason why I've only got the rooster alarm? The wifi is still pretty buggy on 10b and needs manually switching on multiple times daily. I'm on a uk tft phone using 2.6.32.9. Should I change to a different kernel?

I had this - go back over the last couple of pages, someone had a link to the Froyo Alarm.zip. Install via clockwork and you now have a standalone alarm and access to all the alarm tones.

Guest Paden
Posted
5% drop in overnight from 11 PM to 9 AM. How does it sound ??

Actually at 11 PM last checked battery was at 28% and in morning too it was 28% which surprised me and i am sure something was wrong so i rebooted the phone and it came to 23%

Is this behaviour normal ??

That's normal behaviour for me rak007, a reboot costs you 5%.

Has been the same with other ROM's as well.

Cheers, Paul

Guest andycanada
Posted

Anyone have strange effects with GPS?

I hadn't used GPS for a while and when I turned it on a few days ago and went to the GPS test app, the GPS icon did not flash on the status bar, although the app said the GPS was on. I sat there for 10 minutes and nothing happened. I turned off GPS and turned it back on again and tried but the same thing happened. Then I restarted and everything was ok. However, yesterday I was using GPS again and every time I turn GPS on it also turns on my wifi. I tried restarting a few times and this still happens. My GPS works perfectly now but every time I turn on the GPS the wifi gets turned on as well.

Using r10b

swiss oled phone bought from OK mobile

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.