[ROM] LeoGingerBread's LiquidEdition v5.0 [05/11/11]

[Guest fischschneehase]

Great') but do you know why wifi tether doesnt work?

[Guest astro14]

I looked through this whole thread (and many others), every single page but i could not find what to do with the .img file that i downloaded. i have the acer a1 tool that i used for a previouse (2.2) update of my liquid but it only takes .bin images. is there any explaination available what to do with the .img file? which tool do i need to install the new gingerbread?

[Guest Lens_flare]

Img? Where you found them?

Img is partition of rom and have to be flashed with fastboot interface.

To flash this rom you don't need img, just bin and zipped Rom.

[Guest astro14]

I got it from http://darioroms.com/downloads/

which rom is the latest and which should i get (and from where? :) )

[Guest Lens_flare]

Ah, do you mean boot.img? :)

No unzip an archive, just send it to root of sdcard and flash with no sign check(flash/test menu) via recovery(power+vol dwn+camera when device is turned off).

For subject the latest is Leogingerbread 4.01 from Darioroms.

Edited April 22, 2011 by Lens_flare

[Guest astro14]

Ah, do you mean boot.img? :)

No unzip an archive, just send it to root of sdcard and flash with no sign check(flash/test menu) via recovery(power+vol dwn+camera when device is turned off).

For subject the latest is Leogingerbread 4.01 from Darioroms.

Oh I am so gretful! Thank you so much!! :)

Edited April 22, 2011 by astro14

[Guest fischschneehase]

ofcorse. everything is the same as in CM7 by R,K,T and this dario's rom.

one question at all :):D why the hell the battery consumton is enormous?! it went down 30% in about 3 hours :S and in akku stats it shows me that screen needs the power but this is impossible cause it was in standby mode:S

[Guest Dr. Robert Chase]

one question at all :):D why the hell the battery consumton is enormous?! it went down 30% in about 3 hours :S and in akku stats it shows me that screen needs the power but this is impossible cause it was in standby mode:S

:) dunno

well, you better forget about this port and use koud's latest builds.

[Guest darrude]

one question at all :):D why the hell the battery consumton is enormous?! it went down 30% in about 3 hours :S and in akku stats it shows me that screen needs the power but this is impossible cause it was in standby mode:S

Battery life is fine for me. I'm getting 48 hours in standby, a full day with web browsing, sat nav etc, better than stick rom.

[Guest Dario93]

Guys,as some of you may have seen on twitter,well, I'm going to stop developing new ROMs for some time... But,until all the bugs of :

- FroyoMetal V4

- LeoGingerBread

- CM6.1

Are fixed,I won't stop dev work. So,stay tuned for very soon releases :)

[Guest Dario93]

one question at all :):D why the hell the battery consumton is enormous?! it went down 30% in about 3 hours :S and in akku stats it shows me that screen needs the power but this is impossible cause it was in standby mode:S

Try to follow this procedure to recalibrate battery:

-With the phone turned on,perform a full charge

-Turn off the phone and let it charge for another half an hour

-Disconnect the charger and enter in recovery,then wipe battery stats

Now turn on the phone,and see if battery life is better,as it should be :)

[Guest stanomx]

What means version 3.5 ? Is it same as 3.2 but without radio?

[Guest gnufabio]

What means version 3.5 ? Is it same as 3.2 but without radio?

Wtf??

[Guest Motoox]

I think V3.20 can connect only IEE802.11g, not IEEE802.11n.

I hope the next version supports IEEE802.11n.

[Guest bais]

Liquid doesn't support Wifi n I think.

[Guest sundawg]

Liquid doesn't support Wifi n I think.

Yep thats rite acer liquid E don't support 802.11 N as the integrated chipset is a/b/g .but as this custom rom is ported from N1 or any of 'em other brand .that don't make liquid work on 802.11N . :)

[Guest Dario93]

Liquid doesn't support Wifi n I think.

Right :)

[Guest cKen]

i cant copy/select text on browsers, does it only happen to me?

[Guest jdouce]

Great rom, ty!

Just wondering if apps2sd needs (or is best with) a ext partition or if it'll do it fine on straight FAT?

Thanks again!

[Guest Dario93]

Great rom, ty!

Just wondering if apps2sd needs (or is best with) a ext partition or if it'll do it fine on straight FAT?

Thanks again!

It'll have best performance on ext partition :mellow:

[Guest Dario93]

As you can see looking at first post, I'm going to upload final LeoGB,It will take only the time to test it this night :mellow:

[Guest Robin Woodo]

As you can see looking at first post, I'm going to upload final LeoGB,It will take only the time to test it this night :mellow:

Can you please test, if it's possible to connect to a wifi network with a hidden SSID? Thanks alot!

[Guest Dario93]

Can you please test, if it's possible to connect to a wifi network with a hidden SSID? Thanks alot!

I will try,but I my home network has public SSID :S

Edited April 28, 2011 by Dario93

[Guest TheShak]

As you can see looking at first post, I'm going to upload final LeoGB,It will take only the time to test it this night :mellow:

Yes! looking forward to it. I hope all sensors work great and the "losing data after a call" is fixed?

Thanks Dario :o

Edited April 28, 2011 by TheShak

[Guest Dario93]

Yes! looking forward to it. I hope all sensors work great and the "losing data after a call" is fixed?

Thanks Dario :o

I made some tests and it seems ok :mellow: