Jump to content

Recommended Posts

Posted

That would explain why its not working for JoshuaHiggins. Sorry I should have spotted that. I'm running the 174 nightly build and that uses 2.6.32.9. I would try flashing that ROM and try the steps above.

Guest JoshuaHiggins
Posted

Hi, thanks for the advice!

I meant that I tried it in the original zip, and then after that didn't work, I extracted to see if it worked..

Neither did :/

My issue is as we speak, the file aborts half way through the installation.

You've mentioned two zips, I only have the "config-otg" zip, what files have you mentioned, and where do I find them as I've not come across them anywhere! D:

Again I appreciate the help already, didn't expect such quick and helpful replies :)

Guest JoshuaHiggins
Posted

Oh sorry I failed to see your responses (on mobile), apologies!

So you're saying the kernel I'm currently using won't work with this zip? (As I'm using a newer kernel)

Flash to the older 174 version with the older kernel correct?

Thanks!

Posted

Oh sorry I failed to see your responses (on mobile), apologies!

So you're saying the kernel I'm currently using won't work with this zip? (As I'm using a newer kernel)

Flash to the older 174 version with the older kernel correct?

Thanks!

Yeah give that a try.

Posted

Hello !

I didn't find the zip you are talking about for host mode on zte blade.

I have Cyanogen mod 7 09292011 Nightly with build number : GRJ90.

Can someone help me to enable host mode on my phone ? :)

Have a good day/night,

Valentin.

Posted

what the diference between usb_otg.zip and usbotg.zip?

Try usbotg.zip.

Posted (edited)

Thanks, and how could i install this kernel on my phone ?

What would i do if i try to installer these zips on my kernel ?

Edited by imval
Posted

Thanks, and how could i install this kernel on my phone ?

What would i do if i try to installer these zips on my kernel ?

You will need to reflash your phone with an older kernel e.g. the nightly - 174

Guest DB_Runner
Posted

i hope somebody can build a OTG patch for the new kernel. t0mm13b? :rolleyes: :D

Guest t0mm13b
Posted

i hope somebody can build a OTG patch for the new kernel. t0mm13b? :rolleyes: :D

:lol:

I am not really sure as the USB mechanism handling in the kernel is different to .32.9 kernel...

Have no idea if its actually integrated properly into the kernel or not but I do recall seeing that Tom_G has added USB accessory mode which was meant to go into the upcoming CM7 7.1 release this upcoming weekend....

In any case, "once bitten twice shy" applies, after killing the blade and getting it resurrected .... :)

Posted

Hello,

I would like to know why Cyanogen mod nightlies developers don't add ust otg to their rom ?

And Is there somebody that can make a patch for the 221 Nightly ? :)

Posted

Hello,

I would like to know why Cyanogen mod nightlies developers don't add ust otg to their rom ?

And Is there somebody that can make a patch for the 221 Nightly ? :)

Edit : For the 224 Nightly now :)

  • 2 weeks later...
Posted

+1, have no stable internet here atm and can't try anything myself :/

  • 2 months later...
Posted (edited)

Hy. The CM7.1.0 is contains the OTG only for the Nook Color device. CM 7.1.0 has 2.6.35.7-perf+ kernel. Could you change this kernel too? rolleyes.gifrolleyes.gifrolleyes.gif I dont want this topic to die, this is the only topic where I could find usable posts/files. Thanx t0mm13b for the kernel, and I hope you can change the newest stable cm's kernel.

Edited by Kori27
Posted (edited)

I tried this kernel with nightly175 on a ZTE Blade, and it didn't worked. I tried it with a pendrive, a simple mouse, and a HID keyboard+mouse. The pendrive has FAT32 filesystem. Do I need only to connect the pendrive and it should detect it after reboot? Or I missed an important step? I used a home made cabel, what gets the power from the original ZTE charger. I put a USB female connector on the charger cable, and a switch between the ID pin and the ground. Everything seems to be ok, but it doesen't do anything... When i short the 4 and 5 pin and connect the cable with the charger and a pendrive, it reboots on host mode, but it doesen't mounts the pendrive, and the mouse doesen't work too. When I connect it to the PC in this mode, nothing happens, and when I turn the switch not to short the 4 and 5 pin, it connects to the computer. What do I wrong? I read some posts where it worked... sad.gifsad.gif Could you give me some advice?

Sorry for my bad english, I'm Hungarian... rolleyes.gif

Here the log files(when i tried it with a simple, not HID mouse):

lsusb.txt doesen't contains anything.

dmesg:


<5>[01-01 00:00:00.000000] [0: swapper]Linux version 2.6.32.9-perf (t0mm13b@tribbles) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Fri Aug 5 21:58:21 IST 2011

<4>[01-01 00:00:00.000000] [0: swapper]CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f

<4>[01-01 00:00:00.000000] [0: swapper]CPU: VIPT aliasing data cache, VIPT aliasing instruction cache

<4>[01-01 00:00:00.000000] [0: swapper]Machine: blade ZTE handset

<6>[01-01 00:00:00.000000] [0: swapper][ZYF@FTM]parse_tag_zteftm: zte FTM disable !

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) recovery -- Offset:1cc Size:28

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) boot -- Offset:1f4 Size:28

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) splash -- Offset:21c Size:c

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) misc -- Offset:228 Size:4

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) cache -- Offset:22c Size:12c

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) system -- Offset:358 Size:6e0

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) userdata -- Offset:a38 Size:514

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) oem -- Offset:f4c Size:a8

<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) persist -- Offset:ff4 Size:c

<4>[01-01 00:00:00.000000] [0: swapper]Memory policy: ECC disabled, Data cache writeback

<7>[01-01 00:00:00.000000] [0: swapper]On node 0 totalpages: 121344

<7>[01-01 00:00:00.000000] [0: swapper]free_area_init_node: node 0, pgdat c0781b38, node_mem_map c087c000

<7>[01-01 00:00:00.000000] [0: swapper]  Normal zone: 1460 pages used for memmap

<7>[01-01 00:00:00.000000] [0: swapper]  Normal zone: 0 pages reserved

<7>[01-01 00:00:00.000000] [0: swapper]  Normal zone: 119884 pages, LIFO batch:31

<6>[01-01 00:00:00.000000] [0: swapper]allocating 28794880 bytes at c1025000 (3625000 physical) for mdp pmem arena

<6>[01-01 00:00:00.000000] [0: swapper]allocating 11419648 bytes at c2b9b000 (519b000 physical) for adsp pmem arena

<6>[01-01 00:00:00.000000] [0: swapper]allocating 372736 bytes (at 80000 physical) for audio pmem arena

<6>[01-01 00:00:00.000000] [0: swapper]allocating 1536000 bytes at c367f000 (5c7f000 physical) for fb

<6>[01-01 00:00:00.000000] [0: swapper]allocating 114688 bytes at c3800000 (5e00000 physical) for kernel ebi1 pmem arena

<6>[01-01 00:00:00.000000] [0: swapper]allocating 2097152 bytes (at d600000 physical) for KGSL

<6>[01-01 00:00:00.000000] [0: swapper]length = 0 ++ 

<6>[01-01 00:00:00.000000] [0: swapper]length = 0 -- 

<6>[01-01 00:00:00.000000] [0: swapper]allocating 0 M at c6700000 (8d00000 physical) for F3

<6>[01-01 00:00:00.000000] [0: swapper]L210 cache controller enabled

<4>[01-01 00:00:00.000000] [0: swapper]Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 119884

<5>[01-01 00:00:00.000000] [0: swapper]Kernel command line: androidboot.hardware=blade console=ttyMSM2,115200 g_android.product_id=0x1351 g_android.serial_number=Blade

<4>[01-01 00:00:00.000000] [0: swapper]usb:android_set_pid: 751 0x1351

<6>[01-01 00:00:00.000000] [0: swapper]PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>[01-01 00:00:00.000000] [0: swapper]Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[01-01 00:00:00.000000] [0: swapper]Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[01-01 00:00:00.000000] [0: swapper]Memory: 218MB 256MB = 474MB total

<5>[01-01 00:00:00.000000] [0: swapper]Memory: 429056KB available (7016K code, 1236K data, 176K init, 0K highmem)

<6>[01-01 00:00:00.000000] [0: swapper]Hierarchical RCU implementation.

<6>[01-01 00:00:00.000000] [0: swapper]NR_IRQS:261

<4>[01-01 00:00:00.000000] [0: swapper]Console: colour dummy device 80x30

<6>[01-01 00:00:00.000000] [0: swapper]Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)

<4>[01-01 00:00:00.220000] [0: swapper]Mount-cache hash table entries: 512

<6>[01-01 00:00:00.220000] [0: swapper]CPU: Testing write buffer coherency: 

<1>[01-01 00:00:00.220000] [0: swapper]Initialized Zero page successfully

<4>[01-01 00:00:00.220000] [0: swapper]ok

<3>[01-01 00:00:00.220000] [1: swapper]pm: create_suspend_sync_work 146: sync in workqueue enable

<6>[01-01 00:00:00.220000] [1: swapper]NET: Registered protocol family 16

<3>[01-01 00:00:00.220000] [1: swapper]smem_find(137, 64): wrong size 56

<6>[01-01 00:00:00.220000] [1: swapper]socinfo_init: v2, id=67, ver=1.2, raw_id=961, raw_ver=2

<6>[01-01 00:00:00.220000] [1: swapper]acpu_clock_init()

<6>[01-01 00:00:00.220000] [1: swapper]L val: PLL0: 50, PLL1: 12, PLL2: 62

<6>[01-01 00:00:00.220000] [1: swapper]ACPU running at 600000 KHz

<6>[01-01 00:00:00.220000] [1: swapper]Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2

<6>[01-01 00:00:00.220000] [1: swapper] 0   19200  -1   1   19200    1   30720 -1 -1 -1  1  4  3

<6>[01-01 00:00:00.220000] [1: swapper] 1  120000   0   8   60000    2   61440 -1 -1 -1  5  4  3

<6>[01-01 00:00:00.220000] [1: swapper] 2  122880   1   2   61440    2   61440  1 -1 -1  5  4  3

<6>[01-01 00:00:00.220000] [1: swapper] 3  200000   2   6   66667    3   61440  1  2 -1  5  4  6

<6>[01-01 00:00:00.220000] [1: swapper] 4  245760   1   1  122880    2   61440  1  2  3  7 -1  6

<6>[01-01 00:00:00.220000] [1: swapper] 5  320000   0   3  160000    2  160000  1  2  3  7 -1  6

<6>[01-01 00:00:00.220000] [1: swapper] 6  400000   2   3  133333    3  160000  5  4  3  9 -1  8

<6>[01-01 00:00:00.220000] [1: swapper] 7  480000   0   2  160000    3  160000  5  4  6 13 -1  8

<6>[01-01 00:00:00.220000] [1: swapper] 8  600000   2   2  200000    3  200000  7 -1  6 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper] 9  652800   0   1  326400    2  200000  7 -1  6 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]10  672000   0   1  336000    2  200000  7 -1  8 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]11  691200   0   1  345600    2  200000  7 -1  8 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]12  710400   0   1  355200    2  200000  7 -1  8 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]13  729600   0   1  364800    2  200000  7 -1  8 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]14  748800   0   1  374400    2  200000  9 -1  8 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]15  768000   0   1  384000    2  200000  9 -1  8 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]16  787200   0   1  393600    2  200000  9 -1  8 17 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]17  806400   0   1  403200    2  200000  9 -1  8 -1 -1 -1

<6>[01-01 00:00:00.220000] [1: swapper]Shared PLL control available.

<6>[01-01 00:00:00.220000] [1: swapper]14 scaling frequencies supported.

<3>[01-01 00:00:00.220000] [1: swapper]gpio_request: 21 ok!

<4>[01-01 00:00:00.220000] [1: swapper]

<4>[01-01 00:00:00.220000] [1: swapper]stone_20100302 vib00:**************************************

<6>[01-01 00:00:00.220000] [1: swapper]ram_console: got buffer at 2500000, size 100000

<6>[01-01 00:00:00.220000] [1: swapper]ram_console: found existing buffer, size 44120, start 44120

<6>[01-01 00:00:00.220000] [1: swapper]console [ram-1] enabled

<3>[01-01 00:00:00.750000] [1: swapper][ar6000] 3.3v on

<3>[01-01 00:00:00.750000] [1: swapper][ar6000] 1.8v on

<3>[01-01 00:00:00.750000] [1: swapper][ar6000] CHIP_PWR_L

<4>[01-01 00:00:00.850000] [1: swapper]bio: create slab <bio-0> at 0

<5>[01-01 00:00:00.860000] [1: swapper]SCSI subsystem initialized

<6>[01-01 00:00:00.860000] [1: swapper]usbcore: registered new interface driver usbfs

<6>[01-01 00:00:00.860000] [1: swapper]usbcore: registered new interface driver hub

<6>[01-01 00:00:00.860000] [1: swapper]usbcore: registered new device driver usb

<6>[01-01 00:00:00.860000] [1: swapper]msm_i2c_probe

<6>[01-01 00:00:00.860000] [1: swapper] Warning: msm on-chip aux i2c bus disabled on Board mooncake!

<6>[01-01 00:00:00.860000] [1: swapper]msm_i2c_probe: clk_ctl 35d, 100000 Hz

<6>[01-01 00:00:00.860000] [1: swapper]Bluetooth: Core ver 2.15

<6>[01-01 00:00:00.860000] [1: swapper]NET: Registered protocol family 31

<6>[01-01 00:00:00.860000] [1: swapper]Bluetooth: HCI device and connection manager initialized

<6>[01-01 00:00:00.860000] [1: swapper]Bluetooth: HCI socket layer initialized

<6>[01-01 00:00:00.860000] [1: swapper]Switching to clocksource dg_timer

<6>[01-01 00:00:00.866488] [1: swapper]NET: Registered protocol family 2

<6>[01-01 00:00:00.866488] [1: swapper]IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

<6>[01-01 00:00:00.866488] [1: swapper]TCP established hash table entries: 16384 (order: 5, 131072 bytes)

<6>[01-01 00:00:00.866488] [1: swapper]TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

<6>[01-01 00:00:00.866488] [1: swapper]TCP: Hash tables configured (established 16384 bind 16384)

<6>[01-01 00:00:00.866488] [1: swapper]TCP reno registered

<6>[01-01 00:00:00.866488] [1: swapper]NET: Registered protocol family 1

<6>[01-01 00:00:00.866488] [1: swapper]RPC: Registered udp transport module.

<6>[01-01 00:00:00.866488] [1: swapper]RPC: Registered tcp transport module.

<6>[01-01 00:00:00.866488] [1: swapper]RPC: Registered tcp NFSv4.1 backchannel transport module.

<6>[01-01 00:00:00.866488] [1: swapper]Trying to unpack rootfs image as initramfs...

<6>[01-01 00:00:00.880020] [1: swapper]Freeing initrd memory: 144K

<6>[01-01 00:00:00.890018] [1: swapper]smd probe

<6>[01-01 00:00:00.890018] [1: swapper]smd_core_init()

<6>[01-01 00:00:00.890018] [1: swapper]smd_core_init() done

<6>[01-01 00:00:00.890018] [1: swapper]smd_alloc_loopback_channel: 'local_loopback' cid=100

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DS' cid=0

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DIAG' cid=1

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'RPCCALL' cid=2

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA1' cid=7

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA2' cid=8

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA3' cid=9

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA4' cid=10

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA5' cid=11

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA6' cid=12

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA7' cid=13

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA11' cid=17

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DAL00' cid=38

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA5_CNTL' cid=39

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA6_CNTL' cid=40

<6>[01-01 00:00:00.890018] [4: events/0]smd_alloc_channel() 'DATA7_CNTL' cid=41

<3>[01-01 00:00:00.890018] [19: modem_notifier]Notify: smsm init

<6>[01-01 00:00:00.890018] [1: swapper]SMD Packet Port Driver Initialized.

<6>[01-01 00:00:00.890018] [1: swapper]SMD: ch 2 0 -> 1

<6>[01-01 00:00:00.890018] SMD: ch 2 1 -> 2

<6>[01-01 00:00:00.890018] [1: swapper][adsp.c:adsp_init] rs3000000a -- 0

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] Number of decoder supported 5

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] Number of concurrency supported 7

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY0TASK

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] queueid:13

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] decid:0

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] nr_codec_support:11

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY1TASK

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] queueid:14

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] decid:1

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] nr_codec_support:5

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY2TASK

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] queueid:15

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] decid:2

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] nr_codec_support:5

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY3TASK

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] queueid:16

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] decid:3

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] nr_codec_support:4

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY4TASK

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] queueid:17

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] decid:4

<6>[01-01 00:00:00.890018] [1: swapper][audpp.c:audpp_probe] nr_codec_support:1

<4>[01-01 00:00:00.900013] [1: swapper]pm_monitor_init enter

<6>[01-01 00:00:00.923390] [24: krpcserversd]RPC_TIME_TOD_SET_APPS_BASES:

<6>[01-01 00:00:00.923390] [24: krpcserversd]	tick = 63800

<6>[01-01 00:00:00.923390] [24: krpcserversd]	stamp = 808464432

<4>[01-01 00:00:00.923390] [24: krpcserversd]drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

<6>[01-01 00:00:00.930015] [1: swapper]ashmem: initialized

<6>[01-01 00:00:00.930015] [1: swapper]Installing knfsd (copyright (C) 1996 [email protected]).

<5>[01-01 00:00:00.930015] [1: swapper]Slow work thread pool: Starting up

<5>[01-01 00:00:00.930015] [1: swapper]Slow work thread pool: Ready

<6>[01-01 00:00:00.930015] [1: swapper]fuse init (API version 7.13)

<4>[01-01 00:00:00.930015] [1: swapper]yaffs Aug  5 2011 21:45:04 Installing. 

<6>[01-01 00:00:00.930015] [1: swapper]msgmni has been set to 839

<6>[01-01 00:00:00.940023] [42: cryptomgr_test]alg: No test for stdrng (krng)

<6>[01-01 00:00:00.940023] [1: swapper]Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)

<6>[01-01 00:00:00.940023] [1: swapper]io scheduler noop registered

<6>[01-01 00:00:00.940023] [1: swapper]io scheduler deadline registered

<6>[01-01 00:00:00.940023] [1: swapper]io scheduler bfq registered (default)

<6>[01-01 00:00:00.940023] [1: swapper]msm_fb_probe:  phy_Addr = 0x5c7f000 virt = 0xee600000

<6>[01-01 00:00:00.940023] [1: swapper]MDP HW Base phy_Address = 0xaa200000 virt = 0xee100000

<4>[01-01 00:00:00.940023] [1: swapper]spi_init

<4>[01-01 00:00:00.940023] [1: swapper]!truly id is 0xffff

<4>[01-01 00:00:00.940023] [1: swapper]oled id is 0xffff

<4>[01-01 00:00:00.940023] [1: swapper][ZGC]:init_lcd_proc

<6>[01-01 00:00:00.950018] [1: swapper]lcdc config

<4>[01-01 00:00:00.950018] [1: swapper]spi_init

<4>[01-01 00:00:00.950018] [1: swapper]![ZYF] lcdc_set_bl level=5, 1

<6>[01-01 00:00:00.990001] [1: swapper]FrameBuffer[0] 480x800 size=1536000 bytes is registered successfully!

<4>[01-01 00:00:00.990001] [1: swapper][ZGC]:LcdPanleID = 42

<6>[01-01 00:00:00.990001] [1: swapper]Registered led device: lcd-backlight

<6>[01-01 00:00:00.990001] [1: swapper]diagfwd initializing ..

<6>[01-01 00:00:00.990001] [1: swapper]SMD: ch 1 0 -> 1

<6>[01-01 00:00:00.990001] [1: swapper]diag opened SMD port ; r = 0

<6>[01-01 00:00:00.990001] SMD: ch 1 1 -> 2

<6>[01-01 00:00:00.990001] [1: swapper]diagchar initializing ..

<6>[01-01 00:00:00.990001] [1: swapper]diagchar initialized

<6>[01-01 00:00:00.990001] [1: swapper]msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART

<6>[01-01 00:00:01.000013] [1: swapper]msm_serial_hs module loaded

<6>[01-01 00:00:01.000013] [1: swapper]brd: module loaded

<6>[01-01 00:00:01.000013] [1: swapper]loop: module loaded

<6>[01-01 00:00:01.000013] [1: swapper]usbcore: registered new interface driver ub

<6>[01-01 00:00:01.000013] [1: swapper]pmem: Initializing pmem_kernel_ebi1 (in-kernel)

<6>[01-01 00:00:01.000013] [1: swapper]pmem: Initializing pmem (user-space) as cached

<6>[01-01 00:00:01.000013] [1: swapper]pmem: Initializing pmem_adsp (user-space) as non-cached

<6>[01-01 00:00:01.000013] [1: swapper]pmem: Initializing pmem_audio (user-space) as non-cached

<6>[01-01 00:00:01.000013] [1: swapper][FM][FYA@FM_SI4708]fm_si4708 add driver successful

<6>[01-01 00:00:01.010016] [1: swapper]SCSI Media Changer driver v0.25 

<6>[01-01 00:00:01.010016] [1: swapper]msm_nand_probe: phys addr 0xa0a00000 

<6>[01-01 00:00:01.010016] [1: swapper]msm_nand_probe: dmac 0x7

<6>[01-01 00:00:01.010016] [1: swapper]msm_nand_probe: allocated dma buffer at ffc0f000, dma_addr 2f4b8000

<6>[01-01 00:00:01.010016] [1: swapper]ONFI probe : CRC Check failed on ONFI Parameter data 

<6>[01-01 00:00:01.010016] [1: swapper]status: e00020

<6>[01-01 00:00:01.010016] [1: swapper]nandid: 5510bcad maker ad device bc

<6>[01-01 00:00:01.010016] [1: swapper]Found a supported NAND device

<6>[01-01 00:00:01.010016] [1: swapper]NAND Id  : 0x5510bcad

<6>[01-01 00:00:01.010016] [1: swapper]Buswidth : 16 Bits 

<6>[01-01 00:00:01.010016] [1: swapper]Density  : 512 MByte

<6>[01-01 00:00:01.010016] [1: swapper]Pagesize : 2048 Bytes

<6>[01-01 00:00:01.010016] [1: swapper]Erasesize: 131072 Bytes

<6>[01-01 00:00:01.010016] [1: swapper]Oobsize  : 64 Bytes

<6>[01-01 00:00:01.010016] [1: swapper]CFG0 Init  : 0xa85408c0 

<6>[01-01 00:00:01.010016] [1: swapper]CFG1 Init  : 0x0004745e 

<6>[01-01 00:00:01.010016] [1: swapper]ECCBUFCFG  : 0x00000203 

<5>[01-01 00:00:01.010016] [1: swapper]Creating 9 MTD partitions on "msm_nand":

<5>[01-01 00:00:01.010016] [1: swapper]0x000003980000-0x000003e80000 : "recovery"

<5>[01-01 00:00:01.010016] [1: swapper]0x000003e80000-0x000004380000 : "boot"

<5>[01-01 00:00:01.010016] [1: swapper]0x000004380000-0x000004500000 : "splash"

<5>[01-01 00:00:01.020026] [1: swapper]0x000004500000-0x000004580000 : "misc"

<5>[01-01 00:00:01.020026] [1: swapper]0x000004580000-0x000006b00000 : "cache"

<5>[01-01 00:00:01.040006] [1: swapper]0x000006b00000-0x000014700000 : "system"

<5>[01-01 00:00:01.160005] [1: swapper]0x000014700000-0x00001e980000 : "userdata"

<5>[01-01 00:00:01.240028] [1: swapper]0x00001e980000-0x00001fe80000 : "oem"

<5>[01-01 00:00:01.260005] [1: swapper]0x00001fe80000-0x000020000000 : "persist"

<6>[01-01 00:00:01.260005] [1: swapper]PPP generic driver version 2.4.2

<6>[01-01 00:00:01.260005] [1: swapper]PPP Deflate Compression module registered

<6>[01-01 00:00:01.260005] [1: swapper]PPP BSD Compression module registered

<6>[01-01 00:00:01.260005] [1: swapper]PPP MPPE Compression module registered

<6>[01-01 00:00:01.260005] [1: swapper]NET: Registered protocol family 24

<6>[01-01 00:00:01.260005] [1: swapper]PPPoL2TP kernel driver, V1.0

<6>[01-01 00:00:01.260005] [1: swapper]SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

<6>[01-01 00:00:01.260005] [1: swapper]CSLIP: code copyright 1989 Regents of the University of California.

<6>[01-01 00:00:01.260005] [1: swapper]tun: Universal TUN/TAP device driver, 1.6

<6>[01-01 00:00:01.260005] [1: swapper]tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

<4>[01-01 00:00:01.260005] [1: swapper]smc91x: not found (-19).

<4>[01-01 00:00:01.260005] [1: swapper]rmnet_init

<6>[01-01 00:00:01.260005] [1: swapper]msm_otg_probe: rpc_connect(0)

<6>[01-01 00:00:01.260005] [1: swapper]__msm_rpc_connect: server not found 30000060:20001

<6>[01-01 00:00:01.400001] [1: swapper]ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[01-01 00:00:01.400001] [1: swapper]msm_hsusb_rpc_connect: usb_ep already connected

<6>[01-01 00:00:01.400001] [1: swapper]host driver registered w/ tranceiver

<6>[01-01 00:00:01.400001] [1: swapper]Initializing USB Mass Storage driver...

<6>[01-01 00:00:01.400001] [1: swapper]usbcore: registered new interface driver usb-storage

<6>[01-01 00:00:01.400001] [1: swapper]USB Mass Storage support registered.

<6>[01-01 00:00:01.400001] [1: swapper]usbcore: registered new interface driver libusual

<6>[01-01 00:00:01.400001] [1: swapper]peripheral driver registered w/ tranceiver

<4>[01-01 00:00:01.400001] [1: swapper]usb: config_ftm_from_tag, 201: ftm_mode disable

<6>[01-01 00:00:01.400001] [4: events/0]msm_hsusb_host msm_hsusb_host.0: Qualcomm On-Chip EHCI Host Controller

<6>[01-01 00:00:01.400001] [4: events/0]msm_hsusb_host msm_hsusb_host.0: new USB bus registered, assigned bus number 1

<6>[01-01 00:00:01.400001] [4: events/0]msm_hsusb_host msm_hsusb_host.0: irq 47, io base 0xa0800000

<6>[01-01 00:00:01.400001] [4: events/0]usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

<6>[01-01 00:00:01.400001] [4: events/0]usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>[01-01 00:00:01.400001] [4: events/0]usb usb1: Product: Qualcomm On-Chip EHCI Host Controller

<6>[01-01 00:00:01.400001] [4: events/0]usb usb1: Manufacturer: Linux 2.6.32.9-perf ehci_hcd

<6>[01-01 00:00:01.400001] [4: events/0]usb usb1: SerialNumber: msm_hsusb_host.0

<6>[01-01 00:00:01.400001] [4: events/0]usb usb1: configuration #1 chosen from 1 choice

<6>[01-01 00:00:01.400001] [4: events/0]hub 1-0:1.0: USB hub found

<6>[01-01 00:00:01.400001] [4: events/0]hub 1-0:1.0: 1 port detected

<3>[01-01 00:00:04.050003] [12: ksuspend_usbd]ulpi_read: timeout 48145400

<3>[01-01 00:00:04.050003] [12: ksuspend_usbd]ulpi_write: timeout

<3>[01-01 00:00:04.570003] [12: ksuspend_usbd]msm_otg_suspend: Unable to suspend phy

<4>[01-01 00:00:09.570003] [1: swapper]======return value=1895301568 

<4>[01-01 00:00:09.570003] [1: swapper]

<3>[01-01 00:00:09.570003] [1: swapper]msm_hsusb_get_set_usb_conf_nv_value: rpc call failed! error: -110

<6>[01-01 00:00:09.570003] [1: swapper]adb_function_init

<4>[01-01 00:00:09.570003] [1: swapper]android_usb gadget: using random self ethernet address

<4>[01-01 00:00:09.570003] [1: swapper]android_usb gadget: using random host ethernet address

<6>[01-01 00:00:09.570003] [1: swapper]usb0: MAC 4a:d1:d8:73:63:04

<6>[01-01 00:00:09.570003] [1: swapper]usb0: HOST MAC d2:79:60:d8:ff:1d

<6>[01-01 00:00:09.570003] [1: swapper]mass_storage_function_add

<3>[01-01 00:00:09.570003] [12: ksuspend_usbd]msm_hsusb_phy_reset: phy_reset rpc failed! rc = -110

<6>[01-01 00:00:09.570003] [1: swapper]android_usb gadget: Number of LUNs=1

<6>[01-01 00:00:09.570003] [1: swapper]android_usb gadget: android_usb ready

<6>[01-01 00:00:09.570003] [1: swapper]msm_hsusb msm_hsusb: registered gadget driver 'android_usb'

<4>[01-01 00:00:09.830005] [1: swapper]wly: synaptics_i2c_read, 8, 8,Ć,S,T,M,1,5,4

<4>[01-01 00:00:09.830005] [1: swapper]wly: synaptics_ts_probe,max_x=1867, max_y=3096

<4>[01-01 00:00:09.830005] [1: swapper]xuke:dup_threshold 4

<6>[01-01 00:00:09.830005] [1: swapper]input: synaptics-rmi-touchscreen as /devices/virtual/input/input0

<6>[01-01 00:00:09.830005] [1: swapper]synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode

<4>[01-01 00:00:09.830005] [1: swapper]gpio 31 request is error!

<4>[01-01 00:00:09.830005] [1: swapper]cypress_touch: probe of 0-000a failed with error -16

<6>[01-01 00:00:09.830005] [1: swapper]GPIO Matrix Keypad Driver: Start keypad matrix for blade_keypad in interrupt mode

<6>[01-01 00:00:09.830005] [1: swapper]input: blade_keypad as /devices/virtual/input/input1

<3>[01-01 00:00:09.830005] [1: swapper]msm_rpc_client_req: RPC call was not successful (3)

<6>[01-01 00:00:09.830005] [1: swapper]using rtc device, msm_rtc, for alarms

<6>[01-01 00:00:09.830005] [1: swapper]rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0

<6>[01-01 00:00:09.830005] [1: swapper]rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1

<6>[01-01 00:00:09.830005] [1: swapper]i2c /dev entries driver

<6>[01-01 00:00:09.830005] [1: swapper][FM][FYA@FM_SI4708]register fm_si4708 device successful!

<6>[01-01 00:00:09.830005] [1: swapper]i2c-gpio i2c-gpio.1: using pins 93 (SDA) and 92 (SCL)

<6>[01-01 00:00:09.830005] [1: swapper]i2c-gpio i2c-gpio.2: using pins 109 (SDA) and 107 (SCL)

<6>[01-01 00:00:09.830005] [1: swapper]akmd_device register successful in akm8973_init

<6>[01-01 00:00:09.830005] [1: swapper]akm_aot_device register successful in akm8973_init

<6>[01-01 00:00:10.040003] [1: swapper]akm8973_init_client: do it in probe function

<6>[01-01 00:00:10.040003] [1: swapper]input: compass as /devices/virtual/input/input2

<6>[01-01 00:00:10.040003] [1: swapper]Compass input devices register successful in akm8973_probe

<6>[01-01 00:00:10.040003] [1: swapper][@gsensor]G-sensor driver: init

<4>[01-01 00:00:10.040003] [1: swapper][gsensor]Start to debug gsensor driver in accel_i2c_probe

<3>[01-01 00:00:10.040003] [1: swapper][fya@gsensor]i2c read success, ret = 0

<6>[01-01 00:00:10.040003] [1: swapper][lis302dl@gsensor]:Device id is 59

<3>[01-01 00:00:10.040003] [1: swapper][lis302dl@gsensor]:our device used lis302dl && lis35de!

<6>[01-01 00:00:10.040003] [1: swapper][lis302dl@gsensor]:use ST gsenosr chip!

<3>[01-01 00:00:10.040003] [1: swapper][lis302dl@gsensor]:lis302dl_probe: lis302dl_device register OK

<3>[01-01 00:00:10.040003] [1: swapper]TAOS: comes into taos_init

<3>[01-01 00:00:10.150001] [1: swapper]TAOS: chip id of taos that was read matches expected id in taos_probe()

<6>[01-01 00:00:10.160001] [1: swapper]input: alsprox as /devices/virtual/input/input3

<6>[01-01 00:00:10.160001] [1: swapper]Linux video capture interface: v2.00

<6>[01-01 00:00:10.200005] [1: swapper]device-mapper: uevent: version 1.0.3

<6>[01-01 00:00:10.200005] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 4032,batt_cap= 87,batt_temp= 29,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-01 00:00:10.200005] [1: swapper]device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]

<6>[01-01 00:00:10.210010] [1: swapper]device-mapper: multipath: version 1.1.0 loaded

<6>[01-01 00:00:10.210010] [1: swapper]device-mapper: multipath round-robin: version 1.0.0 loaded

<6>[01-01 00:00:10.210010] [1: swapper]device-mapper: multipath queue-length: version 0.1.0 loaded

<6>[01-01 00:00:10.210010] [1: swapper]device-mapper: multipath service-time: version 0.2.0 loaded

<6>[01-01 00:00:10.210010] [1: swapper]device-mapper: dm-log-userspace: version 1.0.0 loaded

<6>[01-01 00:00:10.210010] [1: swapper]Bluetooth: HCI UART driver ver 2.2

<6>[01-01 00:00:10.210010] [1: swapper]Bluetooth: HCI H4 protocol initialized

<6>[01-01 00:00:10.210010] [1: swapper]Bluetooth: HCI BCSP protocol initialized

<6>[01-01 00:00:10.210010] [1: swapper]Bluetooth: MSM Sleep Mode Driver Ver 1.1

<6>[01-01 00:00:10.210010] [1: swapper]Bluetooth: BCM Sleep Mode Driver Ver 1.1

<7>[01-01 00:00:10.210010] [1: swapper]bluetooth_power_init

<7>[01-01 00:00:10.210010] [1: swapper]bt_power_probe

<7>[01-01 00:00:10.210010] [1: swapper]bcm_power_init

<7>[01-01 00:00:10.210010] [1: swapper]bcm_power_probe

<3>[01-01 00:00:10.220010] [1: swapper]mmc0: No card detect facilities available

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: 8 bit data mode disabled

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: 4 bit data mode enabled

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: polling status mode enabled

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: Slot eject status = 0

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: Power save feature enable = 1

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: Dummy52 enable = 0

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: DM non-cached buffer at ffc17000, dma_addr 0x2fe28000

<6>[01-01 00:00:10.220010] [1: swapper]mmc0: DM cmd busaddr 0x2fe28000, cmdptr busaddr 0x2fe28300

<3>[01-01 00:00:10.230011] [1: swapper]mmc1: No card detect facilities available

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: 8 bit data mode disabled

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: 4 bit data mode enabled

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: polling status mode disabled

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: Slot eject status = 0

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: Power save feature enable = 1

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: Dummy52 enable = 1

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: DM non-cached buffer at ffc18000, dma_addr 0x2fe2a000

<6>[01-01 00:00:10.230011] [1: swapper]mmc1: DM cmd busaddr 0x2fe2a000, cmdptr busaddr 0x2fe2a300

<6>[01-01 00:00:10.230011] [1: swapper]Registered led device: button-backlight

<6>[01-01 00:00:10.230011] [1: swapper]Registered led device: red

<6>[01-01 00:00:10.230011] [1: swapper]Registered led device: green

<6>[01-01 00:00:10.230011] [1: swapper]__msm_rpc_connect: server not found 30000061:30001

<6>[01-01 00:00:10.230011] [1: swapper]__msm_rpc_connect: server not found 30000061:20001

<6>[01-01 00:00:10.250003] [1: swapper]usbcore: registered new interface driver usbhid

<6>[01-01 00:00:10.250003] [1: swapper]usbhid: v2.6:USB HID core driver

<6>[01-01 00:00:10.250003] [1: swapper]logger: created 64K log 'log_main'

<6>[01-01 00:00:10.250003] [1: swapper]logger: created 256K log 'log_events'

<6>[01-01 00:00:10.250003] [1: swapper]logger: created 64K log 'log_radio'

<6>[01-01 00:00:10.250003] [1: swapper]logger: created 64K log 'log_system'

<6>[01-01 00:00:10.250003] [1: swapper]Advanced Linux Sound Architecture Driver Version 1.0.21.

<4>[01-01 00:00:10.250003] [1: swapper]No device for DAI CODEC_DAI

<4>[01-01 00:00:10.250003] [1: swapper]No device for DAI CPU_DAI

<3>[01-01 00:00:10.250003] [1: swapper]msm_soc: create pcms

<6>[01-01 00:00:10.250003] [1: swapper]asoc: CODEC_DAI <-> CPU_DAI mapping ok

<3>[01-01 00:00:10.250003] [1: swapper]msm_soc: ALSA MSM Mixer Setting

<6>[01-01 00:00:10.250003] [1: swapper]ALSA device list:

<6>[01-01 00:00:10.250003] [1: swapper]  #0: msm-audio (MSM-CARD)

<4>[01-01 00:00:10.250003] [1: swapper]u32 classifier

<4>[01-01 00:00:10.250003] [1: swapper]Netfilter messages via NETLINK v0.30.

<4>[01-01 00:00:10.250003] [1: swapper]nf_conntrack version 0.5.0 (6712 buckets, 26848 max)

<4>[01-01 00:00:10.250003] [1: swapper]ctnetlink v0.93: registering with nfnetlink.

<6>[01-01 00:00:10.250003] [1: swapper]xt_time: kernel timezone is -0000

<6>[01-01 00:00:10.250003] [1: swapper]IPv4 over IPv4 tunneling driver

<6>[01-01 00:00:10.250003] [1: swapper]GRE over IPv4 tunneling driver

<6>[01-01 00:00:10.250003] [1: swapper]ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[01-01 00:00:10.250003] [1: swapper]arp_tables: (C) 2002 David S. Miller

<6>[01-01 00:00:10.250003] [1: swapper]TCP cubic registered

<6>[01-01 00:00:10.250003] [1: swapper]NET: Registered protocol family 10

<6>[01-01 00:00:10.250003] [1: swapper]lo: Disabled Privacy Extensions

<6>[01-01 00:00:10.250003] [1: swapper]tunl0: Disabled Privacy Extensions

<6>[01-01 00:00:10.250003] [1: swapper]Mobile IPv6

<6>[01-01 00:00:10.250003] [1: swapper]ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>[01-01 00:00:10.250003] [1: swapper]IPv6 over IPv4 tunneling driver

<6>[01-01 00:00:10.250003] [1: swapper]sit0: Disabled Privacy Extensions

<6>[01-01 00:00:10.260023] [1: swapper]ip6tnl0: Disabled Privacy Extensions

<6>[01-01 00:00:10.260023] [1: swapper]NET: Registered protocol family 17

<6>[01-01 00:00:10.260023] [1: swapper]NET: Registered protocol family 15

<6>[01-01 00:00:10.260023] [1: swapper]Bluetooth: L2CAP ver 2.14

<6>[01-01 00:00:10.260023] [1: swapper]Bluetooth: L2CAP socket layer initialized

<6>[01-01 00:00:10.260023] [1: swapper]Bluetooth: SCO (Voice Link) ver 0.6

<6>[01-01 00:00:10.260023] [1: swapper]Bluetooth: SCO socket layer initialized

<6>[01-01 00:00:10.270011] [1: swapper]Bluetooth: RFCOMM TTY layer initialized

<6>[01-01 00:00:10.270011] [1: swapper]Bluetooth: RFCOMM socket layer initialized

<6>[01-01 00:00:10.270011] [1: swapper]Bluetooth: RFCOMM ver 1.11

<6>[01-01 00:00:10.270011] [1: swapper]Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[01-01 00:00:10.270011] [1: swapper]Bluetooth: BNEP filters: protocol multicast

<6>[01-01 00:00:10.270011] [1: swapper]Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[01-01 00:00:10.270011] [1: swapper]clock_late_init() disabled 16 unused clocks

<6>[01-01 00:00:10.270011] [1: swapper]input: 7k_handset as /devices/virtual/input/input4

<6>[01-01 00:00:10.270011] [1: swapper]__msm_rpc_connect: server not found 30000091:30001

<3>[01-01 00:00:10.270011] [80: khsclntd]--keycode from A9(charger)

<3>[01-01 00:00:10.270011] [80: khsclntd] 	key:143 keycode:121

<4>[01-01 00:00:10.270011] [80: khsclntd]No pity! update battery event

<3>[01-01 00:00:10.270011] [80: khsclntd]--keycode from A9(charger)

<3>[01-01 00:00:10.270011] [80: khsclntd] 	key:143 keycode:255

<4>[01-01 00:00:10.270011] [80: khsclntd]No pity! update battery event

<3>[01-01 00:00:10.270011] [80: khsclntd]--keycode from A9(charger)

<3>[01-01 00:00:10.270011] [80: khsclntd] 	key:143 keycode:120

<4>[01-01 00:00:10.270011] [80: khsclntd]No pity! update battery event

<3>[01-01 00:00:10.270011] [80: khsclntd]--keycode from A9(charger)

<3>[01-01 00:00:10.270011] [80: khsclntd] 	key:143 keycode:255

<4>[01-01 00:00:10.270011] [80: khsclntd]No pity! update battery event

<3>[01-01 00:00:10.280010] [1: swapper]msm_rpc_client_req: RPC call was not successful (4)

<3>[01-01 00:00:10.280010] [1: swapper]hs_rpc_cb_init: RPC client request failed for pwr key delay cmd, using normal mode

<6>[01-01 00:00:10.280010] [1: swapper]VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

<6>[01-29 18:58:43.500000] [1: swapper]rs30000048 rs30000048.65536: setting system clock to 2012-01-29 18:58:43 UTC (1327863523)

<6>[01-29 18:58:43.500000] [1: swapper]msm_v4l2: msm_v4l2_init

<6>[01-29 18:58:43.500000] [1: swapper]Freeing init memory: 176K

<4>[01-29 18:58:43.500000] [1: swapper]Warning: unable to open an initial console.

<4>[01-29 18:58:43.646546] [14: kmmcd]mmc0: host does not support reading read-only switch. assuming write-enable.

<6>[01-29 18:58:43.646546] [14: kmmcd]mmc0: new high speed SD card at address e624

<6>[01-29 18:58:43.656540] [14: kmmcd]mmcblk0: mmc0:e624 SU02G 1.84 GiB 

<6>[01-29 18:58:43.656540] [14: kmmcd] mmcblk0: p1

<3>[01-29 18:58:43.776541] [1: init]init: cannot open '/initlogo.rle'

<6>[01-29 18:58:43.796540] [1: init]yaffs: dev is 32505861 name is "mtdblock5"

<6>[01-29 18:58:43.796540] [1: init]yaffs: passed flags ""

<4>[01-29 18:58:43.796540] [1: init]yaffs: Attempting MTD mount on 31.5, "mtdblock5"

<4>[01-29 18:58:43.946533] [1: init]yaffs: restored from checkpoint

<4>[01-29 18:58:43.946533] [1: init]yaffs_read_super: isCheckpointed 1

<6>[01-29 18:58:44.026528] [1: init]yaffs: dev is 32505862 name is "mtdblock6"

<6>[01-29 18:58:44.026528] [1: init]yaffs: passed flags ""

<4>[01-29 18:58:44.026528] [1: init]yaffs: Attempting MTD mount on 31.6, "mtdblock6"

<6>[01-29 18:58:47.416530] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 4012,batt_cap= 84,batt_temp= 29,full= 0,allow2shutdown(1?y;n)= 1

<4>[01-29 18:58:49.616533] [1: init]yaffs_read_super: isCheckpointed 0

<6>[01-29 18:58:49.616533] [1: init]yaffs: dev is 32505860 name is "mtdblock4"

<6>[01-29 18:58:49.616533] [1: init]yaffs: passed flags ""

<4>[01-29 18:58:49.616533] [1: init]yaffs: Attempting MTD mount on 31.4, "mtdblock4"

<4>[01-29 18:58:49.696530] [1: init]block 296 is bad

<4>[01-29 18:58:49.706530] [1: init]yaffs_read_super: isCheckpointed 0

<3>[01-29 18:58:50.316541] [1: init]init: service 'console' requires console

<6>[01-29 18:58:50.386541] [139: qmuxd]SMD: ch 39 0 -> 1

<6>[01-29 18:58:50.386541] SMD: ch 39 1 -> 2

<6>[01-29 18:58:50.396541] [139: qmuxd]SMD: ch 40 0 -> 1

<6>[01-29 18:58:50.396541] SMD: ch 40 1 -> 2

<6>[01-29 18:58:50.396541] [139: qmuxd]SMD: ch 41 0 -> 1

<6>[01-29 18:58:50.396541] SMD: ch 41 1 -> 2

<6>[01-29 18:58:50.546545] [132: rild]warning: `rild' uses 32-bit capabilities (legacy support in use)

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.816535] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_avc_ctl 1

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_agc_ctl 1

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_set_volume 0 0 7

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_set_volume 6 0 7

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_set_volume 12 0 7

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_set_volume 3 0 7

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_set_volume 16 0 7

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] snd_set_volume 25 0 7

<6>[01-29 18:58:51.826538] [134: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.846536] [178: Playback Thread][snd.c:snd_ioctl] snd_set_device 6 1 1

<6>[01-29 18:58:51.846536] [178: Playback Thread][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:51.856536] [177: ApmCommandThrea][snd.c:snd_ioctl] snd_set_volume 28 0 7

<6>[01-29 18:58:51.856536] [177: ApmCommandThrea][snd.c:snd_ioctl] chenjun:rc = 0

<6>[01-29 18:58:59.656530] [188: SurfaceFlinger]msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off

<6>[01-29 18:58:59.656530] [188: SurfaceFlinger]msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw

<6>[01-29 18:58:59.656530] [188: SurfaceFlinger]msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw

<2>[01-29 18:58:59.716541] [180: system_server][taos]:taos_open

<2>[01-29 18:58:59.736530] [180: system_server][taos]TAOS_IOCTL_ALS_ON,lux=0

<2>[01-29 18:58:59.736530] [180: system_server][taos]get wake lock

<2>[01-29 18:58:59.766528] [180: system_server][taos]TAOS_IOCTL_PROX_ON

<2>[01-29 18:58:59.766528] [180: system_server][taos]TAOS_IOCTL_PROX_OFF

<2>[01-29 18:58:59.766528] [180: system_server][taos]release wake lock

<2>[01-29 18:58:59.786546] [180: system_server][taos]:taos_release

<6>[01-29 18:59:01.416546] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 4005,batt_cap= 83,batt_temp= 29,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 18:59:06.666556] [177: ApmCommandThrea][snd.c:snd_ioctl] snd_set_volume 28 0 6

<6>[01-29 18:59:06.666556] [177: ApmCommandThrea][snd.c:snd_ioctl] chenjun:rc = 0

<4>[01-29 18:59:06.736541] [197: er.ServerThread]======return value=100 

<4>[01-29 18:59:06.736541] [197: er.ServerThread]

<3>[01-29 18:59:06.736541] [197: er.ServerThread]msm_hsusb_get_set_usb_conf_nv_value: rpc call success

<2>[01-29 18:59:07.326543] [197: er.ServerThread][taos]:taos_open

<2>[01-29 18:59:07.346530] [197: er.ServerThread][taos]TAOS_IOCTL_ALS_ON,lux=0

<6>[01-29 18:59:07.366545] [197: er.ServerThread]request_suspend_state: wakeup (3->0) at 34157255082 (2012-01-29 18:59:07.373775022 UTC)

<6>[01-29 18:59:07.366545] [197: er.ServerThread][early_suspend] wq status=-1 

<4>[01-29 18:59:07.376535] [211: ScreenOffThread][ZYF] lcdc_set_bl level=13, 1

<4>[01-29 18:59:07.376535] [211: ScreenOffThread][LY] send_bkl_address 

<4>[01-29 18:59:07.376535] [211: ScreenOffThread][LY] send_bkl_data 

<6>[01-29 18:59:09.126548] [197: er.ServerThread][ZYF@pmic-leds]DISABLE red led blink 

<6>[01-29 18:59:09.126548] [197: er.ServerThread][ZYF@pmic-leds]DISABLE green led blink 

<6>[01-29 18:59:17.416556] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3997,batt_cap= 82,batt_temp= 29,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 18:59:19.277000] [24: krpcserversd]RPC_TIME_TOD_SET_APPS_BASES:

<6>[01-29 18:59:19.277000] [24: krpcserversd]	tick = 1686646

<6>[01-29 18:59:19.277000] [24: krpcserversd]	stamp = 53052634336067584

<6>[01-29 18:59:19.500000] [24: krpcserversd]rs30000048 rs30000048.65536: setting system clock to 2012-01-29 18:59:19 UTC (1327863559)

<6>[01-29 18:59:25.024873] [173: rild]rmnet_open()

<6>[01-29 18:59:25.024873] [173: rild]SMD: ch 11 0 -> 1

<6>[01-29 18:59:25.024873] SMD: ch 11 1 -> 2

<6>[01-29 18:59:31.984873] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3983,batt_cap= 80,batt_temp= 29,full= 0,allow2shutdown(1?y;n)= 1

<7>[01-29 18:59:35.484896] rmnet0: no IPv6 routers present

<6>[01-29 18:59:47.984906] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3970,batt_cap= 78,batt_temp= 29,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 19:00:01.984868] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3964,batt_cap= 77,batt_temp= 29,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 19:00:03.379161] [24: krpcserversd]RPC_TIME_TOD_SET_APPS_BASES:

<6>[01-29 19:00:03.379161] [24: krpcserversd]	tick = 3124603

<6>[01-29 19:00:03.379161] [24: krpcserversd]	stamp = 53052638631034880

<6>[01-29 19:00:02.500000] [24: krpcserversd]rs30000048 rs30000048.65536: setting system clock to 2012-01-29 19:00:02 UTC (1327863602)

<6>[01-29 19:00:31.104590] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3960,batt_cap= 77,batt_temp= 30,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 19:01:01.104605] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3952,batt_cap= 77,batt_temp= 31,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 19:01:31.104596] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3951,batt_cap= 77,batt_temp= 32,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 19:02:01.104596] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3951,batt_cap= 77,batt_temp= 33,full= 0,allow2shutdown(1?y;n)= 1

<6>[01-29 19:02:47.104601] [65: msm_battery]charger_status= good, charger_type= wall,batt_status= good , batt_level= good,batt_volt= 3949,batt_cap= 77,batt_temp= 34,full= 0,allow2shutdown(1?y;n)= 1

Edited by Kori27

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.