Chocolate kernel for Acer based Rom (All hardwares working XD)

[Guest gnufabio]

Looks like everything works now. BUT! Now I can't DISABLE haptic feedback! That's very annoying... Any tips on that?

Have you tried with LS app?

[Guest LcD59c]

with this the camera work on CM7 ?

[Guest gnufabio]

with this the camera work on CM7 ?

wtf, camera issue is not due to the kernel

[Guest LcD59c]

ah xD i don't know what is kernel lol

[Guest rithchen]

Looks like everything works now. BUT! Now I can't DISABLE haptic feedback! That's very annoying... Any tips on that?

Oops, i didn't test it, the fix is uploaded.

Thanks for your report.

[Guest rithchen]

And that's very nice.. I'm going to test if sygic aurora now works, it had serious opengl problems with acer's adreno driver. Choco kernel should have an updated driver, and using it on cm7 or miui makes sygic working.

packed new boot.img with deploy option 2 instead of 1 and it worked.

So you are saying that you are not using liquidmkbootimg, have you written another one?

May I release the repacked kernel with fear_4.008.08 ramdisk (changes are init.d support and malez's app2sd)? It should work well also under t&l, as our roms are very similar..

I use mkbootimg with following command "mkbootimg --kernel $ARGV[0] --ramdisk ramdisk-repack.cpio.gz --base 0x20000000 --pagesize 4096 --cmdline console=null -o $ARGV[2]"

You can repack and share with others, and if you metion the source is from here.

I'll appreciate it :)

[Guest fear_factory84]

I use mkbootimg with following command "mkbootimg --kernel $ARGV[0] --ramdisk ramdisk-repack.cpio.gz --base 0x20000000 --pagesize 4096 --cmdline console=null -o $ARGV[2]"

You can repack and share with others, and if you metion the source is from here.

I'll appreciate it :)

Of course all credits are up to you.. mkbootimg is the one provided with cyanogenmod?

I would ask you if the gl driver is the same as thepasto/koud/roggin chocolate kernel or not (regarding to sygic aura issue). Perhaps maybe a library problem, I've read on the net that libgsl.so could cause errors like that.......... any thoughts?

[Guest rithchen]

Of course all credits are up to you.. mkbootimg is the one provided with cyanogenmod?

I would ask you if the gl driver is the same as thepasto/koud/roggin chocolate kernel or not (regarding to sygic aura issue). Perhaps maybe a library problem, I've read on the net that libgsl.so could cause errors like that.......... any thoughts?

You can try cyanogenmod's mkbootimg, cause i forget where i got it XD

(If you can't find a good one, i can upload it :))

Yes, I didn't modify gl driver.

And you metion the point, maybe you can change the gl library to see if it works :)

[Guest Alvan Yap]

You can try cyanogenmod's mkbootimg, cause i forget where i got it XD

(If you can't find a good one, i can upload it :))

Yes, I didn't modify gl driver.

And you metion the point, maybe you can change the gl library to see if it works :)

hi rithchen i get loop boot also on T&L rom

[Guest McLoy2008]

Hi, with this new kernel I can't mount sd over usb. Can you help me?

Thanks

[Guest fischschneehase]

dont know what problems you all have tried on top of froyo metal and everything works;)

[Guest vikings123]

Seems to me that the battery drain is still to fast, comparing to the original T&L kernel.

:)

Am I the only exception?

[Guest McLoy2008]

Hi, with this new kernel I can't mount sd over usb. Can you help me?

Thanks

Ok, today I tried with another pc and it work. So maybe it is a driver problem. When I'll be back home I'll try to reinstall the driver and see if it works.

[Guest uzirox]

Just flashed. No problems so far and the phone seems a little more responsive...

[Guest fear_factory84]

Seems to me that the battery drain is still to fast, comparing to the original T&L kernel.

:)

Am I the only exception?

Battery usage seems good for me, post your battery usage statistics. Do you have prox sensor enabled?

Ok, today I tried with another pc and it work. So maybe it is a driver problem. When I'll be back home I'll try to reinstall the driver and see if it works.

With linux at least it works flawlessy, I can transfer files.. also with app2ext enabled.

[Guest JF-Gino ld]

hi rithchen i get loop boot also on T&L rom

Hmm, I also get a bootloop on T&L Gingerbread.14 .....

Apps2sd maybe? - should i repack this?

Edited April 14, 2011 by JF-Gino ld

[Guest Alvan Yap]

Hmm, I also get a bootloop on T&L Gingerbread.14 .....

Apps2sd maybe? - should i repack this?

dunno? i flashed another chocolote is ok so far just headphone is not working :)

[Guest Alexzandro]

Hello I installed it yesterday on E model with 4.002.14, used SETCPU, set at 883mhz, partition my 16GB as 96, 512, other FAT, transferred apps with titanium , freed about 20gb space, BT and hphones work. All ooookkkkkkk.

Regards

Edited April 14, 2011 by Alexzandro

[Guest rithchen]

Hmm, I also get a bootloop on T&L Gingerbread.14 .....

Apps2sd maybe? - should i repack this?

I don't use Apps2sd, and fear_factory84 already repack one for his rom.

Maybe you can try it :)

[Guest Peshkoff]

Hello, rithchen! I have problem with smartass governor. I'm on 4.008.08.EMEA.VFIT and after pnone off, suspend eat all CPU, so battery drain very fast =( I use setcpu and CPU speed is 920Mhz

[Guest Auxx]

Have you tried with LS app?

Why should I try LS app if there's an option in Android settings? And LS setting is forgotten on reboot.

Oops, i didn't test it, the fix is uploaded.

Thanks for your report.

Thank you! Will flash on weekend.

Hello, rithchen! I have problem with smartass governor. I'm on 4.008.08.EMEA.VFIT and after pnone off, suspend eat all CPU, so battery drain very fast =( I use setcpu and CPU speed is 920Mhz

Don't use 4.008.08.EMEA.VFIT.

And now - THE ISSUES.

Everything applies to T&L Gingerbread.14 with Kernel flashed on top.

1. Don't use Apps2SD - it will boot-loop you. Use Link2SD instead.

2. Forever booting. This is a nasty bug. Because your device is up and running, but boot animation still there. Quick fix: when you feel that the device should be up and running just press power button to turn off the screen, press again to turn on. If boot animation is still there, then unlock screen (yes, yes, just slide your finger where the slider should be. It's there even though behind the animation) and turn off/on screen again.

3. Sometimes Liquid won't wake up properly: the screen will be black and keys will be disabled. Yet you will be able to see UI under sun light and interact with it. Reboot is your only saviour. Hold power button, tap Shutdown, tap OK. Use sunlight or powerfull light source to see UI.

[Guest nabis]

when i flash this kernel, it doing wipe, or remain in the data

[Guest Peshkoff]

when i flash this kernel, it doing wipe, or remain in the data

No it's flash only kernel and related stuff, no wipe

[Guest nabis]

i flashed the kernel, but not beyond the reach to the bootanimation

[Guest hider]

i flashed the kernel, but not beyond the reach to the bootanimation

How can i flash it?this file has php format, not zip O-0