Guest AcerFerrari Posted May 30, 2011 Report Share Posted May 30, 2011 when i try to flash AuraxTSense 8.4 port 1.2 i get an error :E Command run_program file : non-package program file "DATA:dtinstal.launch " not supported E:Failure at line 233: run_program DATA:dtinstall.launch Yeah me 2 Link to comment Share on other sites More sharing options...
Guest AcerFerrari Posted May 30, 2011 Report Share Posted May 30, 2011 Blah. Sense is awesome (except 3.0, too heavy...)but it does have problems other than the missing hardware stuff: -There's an annoying thing in all the Sense ports, EXCEPT the Mytouch4G one by vache, which amazingly didn't have this: when you reach the bottom while scrolling in any Sense app, it just gets sluggish, while scrolling up was fine. -Also softkeys, using latest kernel is nice but it has this annoying softkeys problem, I know I mentioned this a lot, but it's just on every single ROM now, and nobody managed fix it (the patch I saw in one of the threads over here doesn't work, at least for me). -It eats children. I haven't had softkey problems b4 I use CM7.1, now seems every rom has softkey problems. The patch doesn't work. It reboots and reboots Link to comment Share on other sites More sharing options...
Guest duyue Posted May 30, 2011 Report Share Posted May 30, 2011 (edited) when flashing,it said some mistakes happen about dtinstall.launch. i cannot finish flashing,and why~? Edited May 30, 2011 by duyue Link to comment Share on other sites More sharing options...
Guest duyue Posted May 30, 2011 Report Share Posted May 30, 2011 Yeah me 2 +1~~~ :D Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 30, 2011 Report Share Posted May 30, 2011 Sorry, i did a mistake in update script :D I'm gonna reupload it this evening, sorry again for the mistake. AcerFerrari: i will try to make a patch Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 30, 2011 Report Share Posted May 30, 2011 (edited) News: fixed AuraxTSense problem. Maybe I also found the problem at Bluetooth but i will try to fix it in the next two weeks. Update: i will also release a kernel that should fix softkeys problem Edited May 30, 2011 by gnufabio Link to comment Share on other sites More sharing options...
Guest Andy__P Posted May 30, 2011 Report Share Posted May 30, 2011 Thanks a lot!! Gonna try. Some (stupid) questions. What is/are the difference(s) between normal Sense and AuraxT? Would Sense 3.0 be possible or is it too much for our liquid? :D Link to comment Share on other sites More sharing options...
Guest Dario93 Posted May 30, 2011 Report Share Posted May 30, 2011 News: fixed AuraxTSense problem. Maybe I also found the problem at Bluetooth but i will try to fix it in the next two weeks. I'm uploading the new auraxtsense rom right now Update: i will also release a kernel that should fix softkeys problem Sorry for my lateness but I had to restart upload,and my U/L speed isn't very high.. only 47 Kb/S :D Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 30, 2011 Report Share Posted May 30, 2011 Thanks a lot!! Gonna try. Some (stupid) questions. What is/are the difference(s) between normal Sense and AuraxT? Would Sense 3.0 be possible or is it too much for our liquid? :D They're graphically differents :D And about Sense 3.0 i think no, because it's too heavy for our liquid, sorry Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 30, 2011 Report Share Posted May 30, 2011 (edited) Ok guys, fixed AuraxTSense, now it work perfectly: http://goo.gl/mQ7x8 I suggest you to overclock @ 883 mhz for a better experience! The cangelog and bugs are the same of the one in the second post :D Kernel with fixed softkeys: http://goo.gl/LbO6M Test and let me know if it works, thanks Edited May 30, 2011 by gnufabio Link to comment Share on other sites More sharing options...
Guest bais Posted May 30, 2011 Report Share Posted May 30, 2011 Sweet, will try and feedback for the softkeys and the ROM in general. Link to comment Share on other sites More sharing options...
Guest Splux Posted May 30, 2011 Report Share Posted May 30, 2011 They're graphically differents :D And about Sense 3.0 i think no, because it's too heavy for our liquid, sorry Please, try to port for fun? Just a flashable port with working usb, just to check it out. Or do I have to borrow my dad's phone just to try the latest sense? :D Link to comment Share on other sites More sharing options...
Guest bais Posted May 30, 2011 Report Share Posted May 30, 2011 (edited) That's the problem, port for fun will also be hard. Sense 3.0 is around 300MB, that will never fit in the liquid, you'll have to cut a lot of things. EDIT: 450MB, what a waste, Sense becomes heavier and more laggy... Edited May 30, 2011 by bais Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 30, 2011 Report Share Posted May 30, 2011 Please, try to port for fun? Just a flashable port with working usb, just to check it out. Or do I have to borrow my dad's phone just to try the latest sense? :D Latest sense is ~ 450mb. It's quite impossible for our liquid, but this summer when i have more time i will try to port a newer sense :D Link to comment Share on other sites More sharing options...
Guest Splux Posted May 30, 2011 Report Share Posted May 30, 2011 Latest sense is ~ 450mb. It's quite impossible for our liquid, but this summer when i have more time i will try to port a newer sense :D Höhö, I can see the problem... pretty clear xD Good luck! You might need it :D And I still haven't flashed the Sense ROM, I have it downloaded but haven't found the time needed yet. Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 30, 2011 Report Share Posted May 30, 2011 Höhö, I can see the problem... pretty clear xD Good luck! You might need it :D And I still haven't flashed the Sense ROM, I have it downloaded but haven't found the time needed yet. Yeah, i will need lot of luck ahah :D Let me know when you will flash AuraxTSense :o Link to comment Share on other sites More sharing options...
Guest AcerFerrari Posted May 31, 2011 Report Share Posted May 31, 2011 Ok guys, fixed AuraxTSense, now it work perfectly: http://goo.gl/mQ7x8 I suggest you to overclock @ 883 mhz for a better experience! The cangelog and bugs are the same of the one in the second post :D Kernel with fixed softkeys: http://goo.gl/LbO6M Test and let me know if it works, thanks Is the softkey kernal work on normal Sense? Link to comment Share on other sites More sharing options...
Guest bais Posted May 31, 2011 Report Share Posted May 31, 2011 Okay little feedback: -Softkeys seemed to work great! Will tell if it still works fine later. -Overall the ROM feels nice, except the laggy scrolling when reaching the bottom of Sense apps (guess this one can't be fixed like that) Anyway the ROM was pretty good but I had to rollback, Wifi didn't work, even after several reboots. It says it's connected but it just can't load a single website. Also Liquid-settings settings are always reseted after a reboot. Link to comment Share on other sites More sharing options...
Guest NecroMan Posted May 31, 2011 Report Share Posted May 31, 2011 Maybe is it better to port Sense 2.1 on Android 2.3 before all other try outs? Link to comment Share on other sites More sharing options...
Guest Temur Posted May 31, 2011 Report Share Posted May 31, 2011 Ok guys, fixed AuraxTSense, now it work perfectly: http://goo.gl/mQ7x8 I suggest you to overclock @ 883 mhz for a better experience! The cangelog and bugs are the same of the one in the second post :D Kernel with fixed softkeys: http://goo.gl/LbO6M Test and let me know if it works, thanks i test it now :D Link to comment Share on other sites More sharing options...
Guest makoblaster Posted May 31, 2011 Report Share Posted May 31, 2011 I tryed AuraxTSense on Liquid E, and the Wifi is stuck to "Obtaining address" (Ottenimento indirizzo), the same problem for an old Gingerbread rom. Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 31, 2011 Report Share Posted May 31, 2011 Is the softkey kernal work on normal Sense? Yep, it should. Okay little feedback: -Softkeys seemed to work great! Will tell if it still works fine later. -Overall the ROM feels nice, except the laggy scrolling when reaching the bottom of Sense apps (guess this one can't be fixed like that) Anyway the ROM was pretty good but I had to rollback, Wifi didn't work, even after several reboots. It says it's connected but it just can't load a single website. Also Liquid-settings settings are always reseted after a reboot. Do you mean sense apps of AuraxTSense or Sense-d? However I'm going to fix these problems Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 31, 2011 Report Share Posted May 31, 2011 (edited) For wifi: The first boot seems to be brooken, reboot the device To get wifi working you must turn on the wifi and then reboot the device. If you turn the wifi on before powering off the device you shouldn't have problem..This is the only method to use wifi for now (for both AuraxTSense and Sense-D i think) sorry :D Edited May 31, 2011 by gnufabio Link to comment Share on other sites More sharing options...
Guest AcerFerrari Posted May 31, 2011 Report Share Posted May 31, 2011 Flashed AuraxTsense, a few drawbacks: The camera still only has 3MP Very laggy The sensitivity often reset after reboot SetCPU FCs, cannot OC For the normal Sense, still some drawbacks: The camera often crashes even I use the app called Vxxxxxx Swap cannot be activated Link to comment Share on other sites More sharing options...
Guest gnufabio Posted May 31, 2011 Report Share Posted May 31, 2011 Flashed AuraxTsense, a few drawbacks: The camera still only has 3MP Very laggy The sensitivity often reset after reboot SetCPU FCs, cannot OC For the normal Sense, still some drawbacks: The camera often crashes even I use the app called Vxxxxxx Swap cannot be activated Thanks for the feedback, i'm going to give it a look. For the sensitivity problem i've made a patch, i'm testing it right now. AuraxTSense laggy? For me works well... I'm going also to try the Vignette app...strange it worked right for me.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now