Guest dakill Posted June 28, 2011 Report Posted June 28, 2011 Contrary to the majority here, i think the soft keys vibrations are pretty useful. when an application is not responding or running slowly it is the only way of knowing that i have pressed the button or not
Guest Álisson D. Posted June 28, 2011 Report Posted June 28, 2011 When I receive a message LED blinks (normal), after reading, rather than off, it stays on, just off after restart. Other people had the same problem. Sorry for the bad English. (Google Translate. :) )
Guest oozi Posted June 28, 2011 Report Posted June 28, 2011 When I receive a message LED blinks (normal), after reading, rather than off, it stays on, just off after restart. Other people had the same problem. Sorry for the bad English. (Google Translate. :) ) same here dude, i notice that 20 mins ago, the led blinks when you recieve the mensage but stays on green even after you read it. just turns off after a restart.
Guest TigTex Posted June 28, 2011 Report Posted June 28, 2011 (edited) same here dude, i notice that 20 mins ago, the led blinks when you recieve the mensage but stays on green even after you read it. just turns off after a restart. That's a blade's problem and since my rom is based on zte blade, you also have the problem. There is nothing that I can do to fix this... We must wait until it's fixed on the blade's nightly builds. ----- Meanwhile, I have compiled a new kernel that I want you to test it. It has swap support and I've changed some calibration values. Anyone that feels brave enough to test it just download this zip http://www.mediafire.com/?r61khq3ywf0cych and flash it using clockworkmod recovery. No need to wipe anything, just flash and reboot. Edited June 28, 2011 by TigTex
Guest rremedio Posted June 28, 2011 Report Posted June 28, 2011 Or you can download rexchun's rom and use his boot.img instead of mine, he has swap on his kernel. Tried to put his boot.img on your rom hoping for a better calibration. The rom loads but the touch won't work. Your rom is better (battery life, languages, stability) but I'm sticking with Rexchun's rom becouse I type all day long. Keep up the good work!!!
Guest rremedio Posted June 28, 2011 Report Posted June 28, 2011 (edited) Meanwhile, I have compiled a new kernel that I want you to test it. It has swap support and I've changed some calibration values. Anyone that feels brave enough to test it just download this zip http://www.mediafire.com/?r61khq3ywf0cych and flash it using clockworkmod recovery. No need to wipe anything, just flash and reboot. I'm testing it. Seems like the touchscreen is much better now! Thank you! edit: don't know about swap...do I need to partition anything? Edited June 28, 2011 by rremedio
Guest Android77 Posted June 28, 2011 Report Posted June 28, 2011 (edited) Rremedio, Go to > Conf. CyanogenMod > Perfomance > Use Compcache > set to 18% or up... Restart te phone. This feature is to improve system performance. Tigtex, the calibration was very good! I have had no problems pressing two keys simultaneously. But it happens every once in a while the problem before, only now in the middle of the screen .. lol But far better to enter text. Thank you for the job again! About the swap I'm still doing tests but the little I watched was fast yes, putting in 26%. Actually after a while I realized that freed up more memory because of the swap, but I think I think decline to 18% better on tests that Icarus, 26% may compromise the speed SOME process already running. But great job, very good! I know how tricky because I'm a programmer. Net. Edited June 29, 2011 by Android77
Guest takeokun Posted June 29, 2011 Report Posted June 29, 2011 Congratulations! The calibration is much better with this new kernel! Very good job! Thank you! :)
Guest buzzhaina Posted June 29, 2011 Report Posted June 29, 2011 The new kernel calibration has gone few notches up... Kool... USB stopped working for me:-p cable is connected but nothing goes working at the status bar:-P
Guest Lerik Posted June 29, 2011 Report Posted June 29, 2011 Kool... USB stopped working for me:-p cable is connected but nothing goes working at the status bar:-P
Guest KATALYST Posted June 29, 2011 Report Posted June 29, 2011 USB stopped working for me:-p cable is connected but nothing goes working at the status bar:-P Me to :)
Guest Posted June 29, 2011 Report Posted June 29, 2011 Hi Tig Tex, Request - Can you please add indic language support in unicode.... i have installed indic fonts but its not rendering the complex scripts properly.... We Indians are very much waiting for this..... I know its difficult & we have to edit framework-res.apk and all.... but as you are very good at these stuff i thought you are the best guy to do this.... plssss plssss give complex script rendering support for indic languages... thank u...
Guest TigTex Posted June 29, 2011 Report Posted June 29, 2011 (edited) The new kernel calibration has gone few notches up... Kool... USB stopped working for me:-p cable is connected but nothing goes working at the status bar:-P Try to disable usb debugging... shishir, i can't do nothing about languages, you have to request that to cyanogenmod team... Edited June 29, 2011 by TigTex
Guest Lerik Posted June 29, 2011 Report Posted June 29, 2011 (edited) The first thing i tried to disable debugging USB! I went back to the old kernel (racer-kernel-2.6.32.9-by-deadlink)! I am no expert, but using the firmware (2.3.4 ZTE-U X850 MND-B01). Consume battery power at night and only 3-5 %. Radio works well and has no effect on energy consumption. In my opinion, the case in the firmware! Low power consumption characteristic of the firmware (2.3.4_mooncake_v1.88_mops1k_mod_Standart ). Maybe we should evaluate these firmware! Edited June 29, 2011 by Lerik
Guest oozi Posted June 30, 2011 Report Posted June 30, 2011 (edited) That's a blade's problem and since my rom is based on zte blade, you also have the problem. There is nothing that I can do to fix this... We must wait until it's fixed on the blade's nightly builds. ----- Meanwhile, I have compiled a new kernel that I want you to test it. It has swap support and I've changed some calibration values. Anyone that feels brave enough to test it just download this zip http://www.mediafire.com/?r61khq3ywf0cych and flash it using clockworkmod recovery. No need to wipe anything, just flash and reboot. oh, i see, i didnt know that it was a ZTE Blade bug. testing now the new kernel! if the phone usb goes into a failure like those 2 cases here in this thread, if i flash the V1.113 again it will return to kernel 2.6.32.9? or i will have to flash the previous kernel again manualy? btw, this V1.113 was the best rom i've tested till now to the X850. congrats on your work man, i'm happy to have ppl like you on the internet. EDIT: i flashed the new kernel and my usb transfer is also gone (tested with debuggin on and off). :), but the screen calibration IS GREAT! i'm back with the previous kernel thats is incorporated on the V1.113, and man, i miss the screen calibration of that kernel with swap, its a shame that usb did not worked propely, otherwise i must say that would be the best screen calibration by now. Edited June 30, 2011 by oozi
Guest Android77 Posted June 30, 2011 Report Posted June 30, 2011 The accuracy is perfect, only the problem of recognizing two points as in the previous rom, as shown in the video.Correcting this would be perfect. This is more unstable rom usb problem gave me and I had to return the old kernel.
Guest Oriberu Posted June 30, 2011 Report Posted June 30, 2011 The new kernel calibration has gone few notches up... Kool... USB stopped working for me:-p cable is connected but nothing goes working at the status bar:-P to me the same thing happens when I plug the USB does nothing, just load the battery :S I can't move files or anything... :)
Guest buzzhaina Posted June 30, 2011 Report Posted June 30, 2011 Okay for me even the battery wasnt charging... with the new kernel.. disabled the usb debugging mock locations..n its charging as of now..got to check the usb:P
Guest Rafaelsan Posted June 30, 2011 Report Posted June 30, 2011 (edited) I'm having problems with the GPS. It's not finding my correct direction. Also, when using street view in compass mode, the direction goes crazy and Android crashes, rebooting the phone. Actually, when I open Google Maps and turn the phone right, the pointer goes left, and vice versa. I've tried to calibrate the magnetometer but no deal. Any tips? Edited June 30, 2011 by Rafaelsan
Guest bollux78 Posted July 1, 2011 Report Posted July 1, 2011 Have anyone managed to put some clock widgets or other widgets in v113? I can install them, but they do not appear on the widgets list when long pressing the desktop. only advanced task killer could be added there. any ideas? thanks !
Guest bollux78 Posted July 1, 2011 Report Posted July 1, 2011 (edited) Have anyone managed to put some clock widgets or other widgets in v113? I can install them, but they do not appear on the widgets list when long pressing the desktop. only advanced task killer could be added there. any ideas? thanks ! sorry for double posting............... Edited July 1, 2011 by bollux78
Guest oozi Posted July 1, 2011 Report Posted July 1, 2011 Have anyone managed to put some clock widgets or other widgets in v113? I can install them, but they do not appear on the widgets list when long pressing the desktop. only advanced task killer could be added there. any ideas? thanks ! sorry for double posting............... widgets 100% normal here for me, i'm using at the moment: apn on/off, battery % widget and the clock.
Guest anil_go Posted July 1, 2011 Report Posted July 1, 2011 Have anyone managed to put some clock widgets or other widgets in v113? I can install them, but they do not appear on the widgets list when long pressing the desktop. only advanced task killer could be added there. any ideas? thanks ! sorry for double posting............... yes just move your app from sdcard to phone , then it will appear in the widget list . simple, yesterday i installed analog clock widget succesfully :)
Guest Jésus Alberto Posted July 1, 2011 Report Posted July 1, 2011 Try to disable usb debugging... shishir, i can't do nothing about languages, you have to request that to cyanogenmod team... In the last fix USB has stopped to work as mass storage even with debugging mode disabled. USB just for charging with that.
Guest Posted July 1, 2011 Report Posted July 1, 2011 Hi Tig Tex, New minor bug found - When you go to Video player app you see Music player tab icons on the top which should not be there.... Screenshots attached....
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now