Guest tilal6991 Posted September 6, 2011 Report Posted September 6, 2011 Brilliant! Thanks a million for that - will have some news on that tomorrow (it will be beta so will need a beta-tester or two!) Cheers, P.S: What ROM is that and would you know the device tree for the skate so that I can integrate into the build? CM 7.
Guest t0mm13b Posted September 8, 2011 Report Posted September 8, 2011 (edited) Hi, okie, this is BETA, so you've been warned :) Download the file from Phoenix's server here. The filename to try out this is photom_cwm_update_skate.zip. Flash it using the existing recovery and please let me know how you get on? Cheers, B) Edited September 8, 2011 by t0mm13b
Guest philmein Posted September 8, 2011 Report Posted September 8, 2011 Hi, okie, this is BETA, so you've been warned :) Download the file from Phoenix's server here. The filename to try out this is photom_cwm_update_skate.zip. Flash it using the existing recovery and please let me know how you get on? Cheers, B) im afraid it does not boot stuck on the green android when i try to get clockwork ( tried holding vol down method and reboot widget) phone boots ok if i do not press vol- had to reflash pauls cwm
Guest t0mm13b Posted September 8, 2011 Report Posted September 8, 2011 im afraid it does not boot stuck on the green android when i try to get clockwork ( tried holding vol down method and reboot widget) phone boots ok if i do not press vol- had to reflash pauls cwm Cheers for that test :) I will unpack pauls cwm, replace the binary and repack it again and take it from there... Stay tuned :) B)
Guest t0mm13b Posted September 8, 2011 Report Posted September 8, 2011 Please try again by referring back to post #27. What I did - Unpacked Pauls CWM zip, replaced the binary for the recovery, re-packed it. Fingers crossed.... :)
Guest philmein Posted September 8, 2011 Report Posted September 8, 2011 (edited) Please try again by referring back to post #27. What I did - Unpacked Pauls CWM zip, replaced the binary for the recovery, re-packed it. Fingers crossed.... :) still not working same problem green android only btw using MCR pauls rom Edited September 8, 2011 by philmein
Guest t0mm13b Posted September 8, 2011 Report Posted September 8, 2011 still not working same problem green android only btw using MCR pauls rom Oo Now am stumped! Did not change the kernel... wtf! :lol: Does the command adb devices return anything when that is plugged in with clockworkmod stuck on boot screen with green android... ? What identifier does the lsusb normally give for MCR ROM that is up and running as normally...? What base address does the rom load from? So many questions.... :) Cheers for your patience in helping us :)
Guest philmein Posted September 8, 2011 Report Posted September 8, 2011 (edited) it may be best if somebody tries it who has blueginger custom rom instead of pauls MCR Does the command adb devices return anything when that is plugged in with clockworkmod stuck on boot screen with green android... ? What identifier does the lsusb normally give for MCR ROM that is up and running as normally...? sorry this bit is a bit beyond me sorry i cannot be of more help Edited September 8, 2011 by philmein
Guest t0mm13b Posted September 29, 2011 Report Posted September 29, 2011 (edited) Would anyone care to try out this version of the mod of CWM? Unzip it, plug in the cable, and issue this command adb reboot bootloader then finally, use fastboot fastboot flash recovery recovery.img Please let me know how you get on? Cheers, B)photom_recovery_skate_beta.zip Edited September 29, 2011 by t0mm13b
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 Bump :D just having a bash now
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 any chance of a cwm version seem to be having issues with fast boot dos screen vanishes after a second
Guest t0mm13b Posted September 30, 2011 Report Posted September 30, 2011 any chance of a cwm version seem to be having issues with fast boot dos screen vanishes after a second Here's the attached Clockwork script to flash the new version :) Please do let me know how you get on. Cheers B)photom_cwm_update_skate.zip
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 the clockwork shows up with new batt indicator but the resolution is very bad and no movement with vol+ vol- or the touch controls used pauls cmw installer and changed img files
Guest t0mm13b Posted September 30, 2011 Report Posted September 30, 2011 the clockwork shows up with new batt indicator but the resolution is very bad and no movement with vol+ vol- or the touch controls used pauls cmw installer and changed img files ?? Can you explain what you said there? What do you mean by "resolution is very bad"? It would be appreciated if you could include a screenshot, remember I am playing blind here and do not know. The skate's resolution is 800x480 right? :unsure:
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 ?? Can you explain what you said there? What do you mean by "resolution is very bad"? It would be appreciated if you could include a screenshot, remember I am playing blind here and do not know. The skate's resolution is 800x480 right? :unsure: its very faded can hardly see the text and the touch buttons vol+ vol- don not work touch controls do not work either the batt indicator is there in the top right side but no functions work i have put pauls cwm back on now is as if there is no lighting to see the menus
Guest t0mm13b Posted September 30, 2011 Report Posted September 30, 2011 its very faded can hardly see the text and the touch buttons vol+ vol- don not work touch controls do not work either the batt indicator is there in the top right side but no functions work i have put pauls cwm back on now is as if there is no lighting to see the menus Okie... a screenshot of it on the Zte Skate, would be appreciated for me to see it.... :unsure: Have a look at this on the Zte Racer here on this thread - is it anything like what you're seeing... provided you include the screenshot. I have git cloned tilal6991's device tree for the skate so something is amiss here....
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 cwm version works touch controls work but the middle one seems to do nothing vol+ vol- and menu buttons work heres a piccy
Guest t0mm13b Posted September 30, 2011 Report Posted September 30, 2011 cwm version works touch controls work but the middle one seems to do nothing vol+ vol- and menu buttons work heres a piccy Piccy ? :D Yes please :) :lol:
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 cannot get the piccy to upload can i email it you?? or any other suggestions
Guest t0mm13b Posted September 30, 2011 Report Posted September 30, 2011 cannot get the piccy to upload can i email it you?? or any other suggestions How about imgshack.us or dropbox.com. Am trying to send you a pm via this forum to give you my email address... :)
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 (edited) http://www.megaupload.com/?d=MU0G8CS4 piccy its rared hope its ok Edited September 30, 2011 by philmein
Guest t0mm13b Posted September 30, 2011 Report Posted September 30, 2011 (edited) http://www.megaupload.com/?d=MU0G8CS4 piccy its rared hope its ok Cool! :D Thanks for that. Am not sure what is it that's causing the icons to not respond... but hey its progress, at least you can see it :D Yes that is the way it is, here it is running on the blade here. Here its running on the Galaxy 5 also. Edited September 30, 2011 by t0mm13b
Guest philmein Posted September 30, 2011 Report Posted September 30, 2011 (edited) the + the swirl and the minus are there but the bottom 4 icons the ones that you touch are missing. but you can touch the empty space where the lower icons should be and it still works even tho you cannott see the icons hope this makes sense tom theres only the missing lower icons to sort i think good luck just adds that xtra touch to the monte carlo Edited September 30, 2011 by philmein
Guest t0mm13b Posted September 30, 2011 Report Posted September 30, 2011 the + the swirl and the minus are there but the bottom 4 icons the ones that you touch are missing. but you can touch the empty space where the lower icons should be and it still works even tho you cannott see the icons hope this makes sense tom theres only the missing lower icons to sort i think good luck just adds that xtra touch to the monte carlo Yes, the swirl and the minus - these are for setting the touch sensitivity, in fact, the swirl is a fingerprint image. There's the left-most icon that is the increasing the sensitivity, the far right-most icon is the decreasing the sensitivity. The one in the middle is the resetting the sensitivity to the default value. As for the bottom icons missing - must double check on that and see if it is indeed there in the recovery.... strange! Oo Will be back to you in a few ;) Thanks a million for that, now that it makes more sense :)
Recommended Posts