Guest R1nGoStar_ Posted November 21, 2011 Report Share Posted November 21, 2011 I test it since i just did clean install and have nothing to lose :) Link to comment Share on other sites More sharing options...
Guest tomS01 Posted November 21, 2011 Report Share Posted November 21, 2011 I test it since i just did clean install and have nothing to lose :) Don't forget with CWM backup your last good version:) Link to comment Share on other sites More sharing options...
Guest TripNRaVeR Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) Here we go! I tried a few times recording FullHD... now it works for me and also after a few reboots and crap it still works. 28000 mb/s no reboot... Hopefully for everyone now. Integrated LE audio drivers Removed 10% useless and not needed htc crap (simlock, perflock) lock lock lock hell no :lol: and more removed L2 bandwith increase on the medium freq to compensate the performance loss in ondemand governor when it scales down after x sec of not using cpu Edit: Custom ZSL addon/addin Now in the config file ZSL is not set, i rebuild parts into the camera compartment, you notice this when taking pictures We need to find out if this is stable and not causing camera crash after xx amount of pictures or whatever I only test 1 video and 1 photo before every release, rest is up to you Results please! http://www.mediafire...73qfz6spwo5tqa4 Stable? For me it is Edited November 21, 2011 by TripNRaVeR Link to comment Share on other sites More sharing options...
Guest Stefko Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) Here we go! I tried a few times recording FullHD... now it works for me and also after a few reboots and crap it still works. 28000 mb/s no reboot... Hopefully for everyone now. Integrated LE audio drivers Removed 10% useless and not needed htc crap (simlock, perflock) lock lock lock hell no :lol: and more removed L2 bandwith increase on the medium freq to compensate the performance loss in ondemand governor when it scales down after x sec of not using cpu Edit: Custom ZSL addon/addin Now in the config file ZSL is not set, i rebuild parts into the camera compartment, you notice this when taking pictures We need to find out if this is stable and not causing camera crash after xx amount of pictures or whatever I only test 1 video and 1 photo before every release, rest is up to you Results please! http://www.mediafire...73qfz6spwo5tqa4 Stable? For me it is it's corrupted... can't flash this file!? Edit 1 MD5: 37A4BC5409051727B1B658DA7A27A007 *2.6.35.14_TripNKernel_XT_preview-002.zip Edited November 21, 2011 by Stefko Link to comment Share on other sites More sharing options...
Guest tomS01 Posted November 21, 2011 Report Share Posted November 21, 2011 it's corrupted... can't flash this file!? Edit 1 MD5: 37A4BC5409051727B1B658DA7A27A007 *2.6.35.14_TripNKernel_XT_preview-002.zip Install aborted. Link to comment Share on other sites More sharing options...
Guest TripNRaVeR Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) http://www.mediafire...ilsvv9iqe12d23t Here is the correct one THE FOLLOWING IS FOR EVERYONE WHO DID A CLEAN INSTALL WITHOUT THE "001" KERNEL UPGRADE Forgot to mention that this is a follow up of the previous 001 preview kernel, you need to flash that one first. And for the next release it means you always need to flash 001 first unless stated otherwise. Edited November 21, 2011 by TripNRaVeR Link to comment Share on other sites More sharing options...
Guest tomS01 Posted November 21, 2011 Report Share Posted November 21, 2011 http://www.mediafire...ilsvv9iqe12d23t Here is the correct one THE FOLLOWING IS FOR EVERYONE WHO DID A CLEAN INSTALL WITHOUT THE "001" KERNEL UPGRADE Forgot to mention that this is a follow up of the previous 001 preview kernel, you need to flash that one first. And for the next release it means you always need to flash 001 first unless stated otherwise. Its works fine in first look. Link to comment Share on other sites More sharing options...
Guest Fusion600 Posted November 21, 2011 Report Share Posted November 21, 2011 I went 1min28sec before it rebooted. Link to comment Share on other sites More sharing options...
Guest audiophile Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) Just updated to latest kernal. . . . .lowest frequency lowered! Hopefully it'll make a small difference for battery. Also delighted to see smartassv2 back! One problem though I tink something might be left out because quadrant: First run:1200. Second run:1700. @1.5ghz ondemand After first run I watched it and the 3d molecule kept jumping down to 7fps. Edited November 21, 2011 by audiophile Link to comment Share on other sites More sharing options...
Guest TripNRaVeR Posted November 21, 2011 Report Share Posted November 21, 2011 Just updated to latest kernal. . . . .lowest frequency lowered! Hopefully it'll make a small difference for battery. Also delighted to see smartassv2 back! One problem though I tink something might be left out because quadrant: First run:1200. Second run:1700. @1.5ghz ondemand After first run I watched it and the 3d molecule kept jumping down to 7fps. I get 3200 :blink: Link to comment Share on other sites More sharing options...
Guest tomS01 Posted November 21, 2011 Report Share Posted November 21, 2011 I went 1min28sec before it rebooted. I use 2,5 min no reboot playing back no reboot. Link to comment Share on other sites More sharing options...
Guest Stefko Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) I use 2,5 min no reboot playing back no reboot. first recording OK 3 mins+ second recording reboot in less than minute tried 2 times. and got 2 reboots on second recording much better than 001 but still there is something wrong.. Edited November 21, 2011 by Stefko Link to comment Share on other sites More sharing options...
Guest TripNRaVeR Posted November 21, 2011 Report Share Posted November 21, 2011 I use 2,5 min no reboot playing back no reboot. So you consider it fixed? :) Finally someone with the same results as me Link to comment Share on other sites More sharing options...
Guest BummAround Posted November 21, 2011 Report Share Posted November 21, 2011 http://www.mediafire...ilsvv9iqe12d23t Here is the correct one THE FOLLOWING IS FOR EVERYONE WHO DID A CLEAN INSTALL WITHOUT THE "001" KERNEL UPGRADE Forgot to mention that this is a follow up of the previous 001 preview kernel, you need to flash that one first. And for the next release it means you always need to flash 001 first unless stated otherwise. Thanks, Trip! So by the disclaimer above, this 002 kernel NEEDS to be flashed on top of the 001 kernel, NOT a clean install, correct? Just want to be absolutely sure. :mellow: Link to comment Share on other sites More sharing options...
Guest R1nGoStar_ Posted November 21, 2011 Report Share Posted November 21, 2011 Don't forget with CWM backup your last good version:) Thanks, I always do both CWM image and Titanium backup, just to be sure ;) Link to comment Share on other sites More sharing options...
Guest tomS01 Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) So you consider it fixed? :) Finally someone with the same results as me I'll make a third control and let you now soon:) Test 1./ 2,5 min no reboot 2./ 3 min No 3./ 12 sec stuck but no reb 4./ 1min 12 sec reboot 5./ 2 min no reboot. so But i have 16 Gb Kingston cl 4 only Edited November 21, 2011 by tomS01 Link to comment Share on other sites More sharing options...
Guest Stefko Posted November 21, 2011 Report Share Posted November 21, 2011 So you consider it fixed? :) Finally someone with the same results as me much better but still reboots my phone. did you try 2 in row? more than 3 mins both? Link to comment Share on other sites More sharing options...
Guest R1nGoStar_ Posted November 21, 2011 Report Share Posted November 21, 2011 This is 2.6.35.14_TripNKernel_XT_preview-002 on top of 2.6.35.14_TripNKernel_XT_preview-001 HD recording test 1) 9 sec. HD then reboot 2) 1 sec. HD then reboot 3) 13 Sec. HD then reboot 4) 5 Sec HD then reboot do I need to go on...:unsure: Link to comment Share on other sites More sharing options...
Guest Fusion600 Posted November 21, 2011 Report Share Posted November 21, 2011 This is 2.6.35.14_TripNKernel_XT_preview-002 on top of 2.6.35.14_TripNKernel_XT_preview-001 HD recording test 1) 9 sec. HD then reboot 2) 1 sec. HD then reboot 3) 13 Sec. HD then reboot 4) 5 Sec HD then reboot do I need to go on...:unsure: Mine was a clean install. Link to comment Share on other sites More sharing options...
Guest R1nGoStar_ Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) Mine was a clean install. Ok, mine too. But now I did it differently.(first time, I did full wipe, S0107B, then kernel 001 and 002) This time, Wiped all (factory reset) Flashed TripNMiUI_S0107B.1.11.4-TripNRaVeR Flashed 2.6.35.14_TripNKernel_XT_preview-002 Now I recorded 2 min.13 sec with no reboot, i am stoked :D Second time I did 1 min 18 sec.(was tired of holding it) Still no reboot. I also played back the videoes, NO REBOOT OR FREEZES, I like To sum it up: its apparently very important to wipe everything before flashing if you want camera HD recording to work. Edited November 21, 2011 by R1nGoStar_ Link to comment Share on other sites More sharing options...
Guest BummAround Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) Ok, mine too. But now I did it differently.(first time I did full wipe, S0107B, then kenel 001 and 002) This time, Wiped all (factory reset) Flashed TripNMiUI_S0107B.1.11.4-TripNRaVeR Flashed 2.6.35.14_TripNKernel_XT_preview-002 Now I recorded 2 min.13 sec with no reboot, i am stoked :D Second time I did 1 min 18 sec.(was tired of holding it) Still no reboot. To sum it up: its apparently very important to wipe everything if you want camera HD recording to work. Wait a min, so you didn't flash 2.6.35.14_TripNKernel_XT_preview-001 at all? Sounds like a good news! Wipe cache & dalvik first, as always. :) Edited November 21, 2011 by BummAround Link to comment Share on other sites More sharing options...
Guest jtsin67 Posted November 22, 2011 Report Share Posted November 22, 2011 (edited) Fresh install, full wipe, install ROM, install 001, install 002. nothing else installed. First run with camera hangs the phone. Pull battery to reboot. Second run same story. Thurd install fauxclock, set governor to performance and lock the cpu up at 1300. Runs fine for two runs, less than a minute each. Drop governor to smartassv2, crashes. Reload, back to ondemand and default settings for clock, works again for a short run then reloads. Next run and once i select camera and change to camcorder it just shows the camera screen running but screen and all buttons non-responsive. So for me its not stable. Trying as R1nGoStar and just go straight to 002 after ROM form fresh install. EDIT: Straight from fresh to 002 (bypass 001) same story more or less :( Edited November 22, 2011 by jtsin67 Link to comment Share on other sites More sharing options...
Guest Gazza10 Posted November 22, 2011 Report Share Posted November 22, 2011 http://www.mediafire...ilsvv9iqe12d23t Here is the correct one THE FOLLOWING IS FOR EVERYONE WHO DID A CLEAN INSTALL WITHOUT THE "001" KERNEL UPGRADE Forgot to mention that this is a follow up of the previous 001 preview kernel, you need to flash that one first. And for the next release it means you always need to flash 001 first unless stated otherwise. Hi Trip, thanks for the kernel update. I won't be able to try this until this evening Indonesian time as I have an overseas visitor with me Link to comment Share on other sites More sharing options...
Guest volscian Posted November 22, 2011 Report Share Posted November 22, 2011 Not too bad, I hit 3200 in Quadrant, and 6500 in Antutu. Only thing I'd like to see is a bit more speed, I know my phone can run 1782 MHz, I do overvolt a bit to hit that, but I can hit 4100 in Quadrant and 7200 in Antutu, so I know there is some room for improvement there. If you want to give it a try Trip, I would love to test out some kernels for you with some "extreme" settings. Link to comment Share on other sites More sharing options...
Guest BummAround Posted November 22, 2011 Report Share Posted November 22, 2011 (edited) ......Trying as R1nGoStar and just go straight to 002 after ROM form fresh install. EDIT: Straight from fresh to 002 (bypass 001) same story more or less :( Concurred. Straight to 002 was not helping, guess R1nGoStar was lucky. Not too bad, I hit 3200 in Quadrant, and 6500 in Antutu. Only thing I'd like to see is a bit more speed, I know my phone can run 1782 MHz, I do overvolt a bit to hit that, but I can hit 4100 in Quadrant and 7200 in Antutu, so I know there is some room for improvement there. If you want to give it a try Trip, I would love to test out some kernels for you with some "extreme" settings. Any comment on the HD recording for more than 3 mins? Good? Did you full wipe everything beforehand? Edited November 22, 2011 by BummAround Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now