Guest recorder Posted October 8, 2011 Report Posted October 8, 2011 it seems i have a little problem on boot 2 and 3 as well... i often get stuck when i login into some apps..for example if i login into facebook...after login i will get stuck at the loading part.
Guest davidevinavil Posted October 8, 2011 Report Posted October 8, 2011 boot 2 and 3 has same voltage. I usually set 1 ghz for daily use and drain is good
Guest davidevinavil Posted October 8, 2011 Report Posted October 8, 2011 (edited) it seems i have a little problem on boot 2 and 3 as well... i often get stuck when i login into some apps..for example if i login into facebook...after login i will get stuck at the loading part. Which frequency do you set usually? Boot2 has this charge graph Boot3 has this charge graph boot 2 rising until 96% and come back yo 94 % during charge so it doesn't reach 100 % boot 3 rising until about 90% and then jump to 100%.. charging all night but seems that really stopped charge before unplug power charge because when unplug it jump down to 86% Is this the check that have all you to do please ;) Edited October 8, 2011 by davidevinavil
Guest davidevinavil Posted October 8, 2011 Report Posted October 8, 2011 (edited) Sorry double post Edited October 8, 2011 by davidevinavil
Guest recorder Posted October 8, 2011 Report Posted October 8, 2011 i've tried to set the frequency at 1.0 ,1.2 and also 1.5
Guest Unbr8kbal Posted October 8, 2011 Report Posted October 8, 2011 Sorry double post Thank you so much, I can run at 1.4 SAFE, been running it for 6 hours with a bit of use and some calls only lost 20% power! Overnight charge to see what's up...
Guest chris_kozani Posted October 8, 2011 Report Posted October 8, 2011 With original kernel from your rom thread i charge battery all night and at morning was at 63% I close device and when open it,it show 90% battery.With test 3 kernel it doesnt go more than 90% very easy like before.I see that battery charges more slow than original kernel
Guest davidevinavil Posted October 8, 2011 Report Posted October 8, 2011 I think I'll revert back to 5 % step :/
Guest k0zmic Posted October 8, 2011 Report Posted October 8, 2011 I'm finding the battery drain to be quite high, started off at around 100% this morning, down to about 40% use without much use. Just some texting and internet. Is the 1% increment causing the battery level to show incorrectly?
Guest k0zmic Posted October 8, 2011 Report Posted October 8, 2011 (edited) can you make a 1.8GHZ kernel Guessing it's possible but I have a feeling most phones would be very unstable at that speed? Not to mention, the battery drain at that speed would be quite high. Edited October 8, 2011 by k0zmic
Guest davidevinavil Posted October 8, 2011 Report Posted October 8, 2011 (edited) I'm finding the battery drain to be quite high, started off at around 100% this morning, down to about 40% use without much use. Just some texting and internet. Is the 1% increment causing the battery level to show incorrectly? Maybe.. Seems that full battery charge issue is also on other device.. http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=6e382d186ba3dcd6&hl=en Edited October 8, 2011 by davidevinavil
Guest Unbr8kbal Posted October 8, 2011 Report Posted October 8, 2011 Sorry double post Yeah charged over night and still only at 73%? WTF? Can you make release a kernal with OC and No 1% battery? Thanks
Guest k0zmic Posted October 8, 2011 Report Posted October 8, 2011 Maybe.. Seems that full battery charge issue is also on other device.. http://www.google.co...86ba3dcd6&hl=en Looks like it. After my phone went down to below 30% the drain was lower (the battery percentage went down much slower) with more usage.
Guest vikings123 Posted October 8, 2011 Report Posted October 8, 2011 I think I'll revert back to 5 % step :/ I have been experimenting how to make the OC working properly. Re-flashed BIN, ROM + different versions of ROM. 1.5GZ never worked smoothly, either lagging or FC. 1.2GZ is so far the most stable setting I can go. Anyway, this is much faster than 800MZ. The problem that confused me is the battery drain and charging. Sometimes I got 8% per hour and never lower than 3%. I wiped battery status, the same. And I charged the device for over 10 hours and only got 71%, (started with 29%.)
Guest davidevinavil Posted October 8, 2011 Report Posted October 8, 2011 I have been experimenting how to make the OC working properly. Re-flashed BIN, ROM + different versions of ROM. 1.5GZ never worked smoothly, either lagging or FC. 1.2GZ is so far the most stable setting I can go. Anyway, this is much faster than 800MZ. The problem that confused me is the battery drain and charging. Sometimes I got 8% per hour and never lower than 3%. I wiped battery status, the same. And I charged the device for over 10 hours and only got 71%, (started with 29%.) Maybe I've found mistake about battery indication.. I'm testing it..
Guest p3anut86 Posted October 8, 2011 Report Posted October 8, 2011 Last night I wiped battery stats, and let it charge fully. Over night (around 10 hours) I lost 25% with wifi off. This works out to 2.5% an hour for me, with it clocked at 1.3ghz. I do have the minimum speed set to 245mhz as I find it lags for a bit when I first unlock the screen if it's set at 128mhz. I do notice that it drains pretty quickly when I'm using it for web browsing etc. Maybe about 5 minutes per percent at best.
Guest Unbr8kbal Posted October 9, 2011 Report Posted October 9, 2011 Guys i've had it at 1.4 since yesterday, using it as i ussually do, very stable! No FC yet, but does lag when i unclock the screen.
Guest p3anut86 Posted October 9, 2011 Report Posted October 9, 2011 Guys i've had it at 1.4 since yesterday, using it as i ussually do, very stable! No FC yet, but does lag when i unclock the screen. I found the best way to fix the screen on lag is as I wrote above. Just set the minimum speed up a bit.
Guest davidevinavil Posted October 9, 2011 Report Posted October 9, 2011 (edited) Need feedback about battery indication.. Changed voltage table of battery test_boot_4 Edited October 9, 2011 by davidevinavil
Guest p3anut86 Posted October 9, 2011 Report Posted October 9, 2011 Need feedback about battery indication.. Changed voltage table of battery test_boot_4 Just flashed it. What did you want me to take note of in particular?
Guest recorder Posted October 9, 2011 Report Posted October 9, 2011 the battery indication for boot 3.....i was charging and it's weird why it won't reach 100% so i rebooted my phone and boom 100% straight from 73%
Guest davidevinavil Posted October 9, 2011 Report Posted October 9, 2011 the battery indication for boot 3.....i was charging and it's weird why it won't reach 100% so i rebooted my phone and boom 100% straight from 73% use boot 4
Guest p3anut86 Posted October 9, 2011 Report Posted October 9, 2011 use boot 4 Just flashed 4, upon reboot it went from 60% to 80%.
Guest davidevinavil Posted October 9, 2011 Report Posted October 9, 2011 that's right because changed battery voltage table ;)
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now