[16 Oct 2011][ROM ] LibraGinger RLS3.1 for BLADE V880 - base on Libra Gingerbread

[Guest gunapriyan]

Dear Mr.Enthusiast,

This is my 3rd message to you today.

I request you to please see my previous 2 messages also.

As per your direction, I have pressed " Calib" Button for Proximity Sensor....

But still now its showing "Proximity ------ X: Stop Fail!......"......

What can i do now.

Thanks & Regards,

Guna

Dear Mr.Enthusiast,

I am using ZTE Blade.....

I think some bugs in the following zips.....

1. Libra-Stock

2. Zte-Libra_gps_fix_signed

3. LibraGinger-CMdialler

Because, some Force Close happened when go to Message Settings.....

I request you to please fix this bugs. Because this ROM is fantastic.

Thanks & Regards,

Guna

[Guest flshg]

Dear Mr.Enthusiast,

This is my 3rd message to you today.

I request you to please see my previous 2 messages also.

As per your direction, I have pressed " Calib" Button for Proximity Sensor....

But still now its showing "Proximity ------ X: Stop Fail!......"......

What can i do now.

Thanks & Regards,

Guna

Are you doing the calibration properly? In normal lighting conditions, after you press the 'calibrate' button, you then move the phone to your ear as if you were about to take a call, then move the phone away again. This allows the phone to know when to switch screen on/off during a call.

[Guest flshg]

Tried this out yesterday felt really smooth and fast. Don't know if its just me but couldn't get adb to work usb debugging was on.

I'm having the same problem. ADB worked fine for all previous roms, just not this one. Restarted adb server few times. USB debugging toggled on/off few times, set to on, but still no adb. USB mass storage works fine.

Using windows 7 pro.

[Guest burstlam]

I'm having the same problem. ADB worked fine for all previous roms, just not this one. Restarted adb server few times. USB debugging toggled on/off few times, set to on, but still no adb. USB mass storage works fine.

Using windows 7 pro.

try to unlock with usb switch test in engineer mode: enter *983*87274# with zte dialler or access with zte emode helper.

press "all functions" to unlock it.

or

simply u need to update ur zte driver

Edited November 6, 2011 by burstlam

[Guest burstlam]

Dear Mr.Enthusiast,

This is my 3rd message to you today.

I request you to please see my previous 2 messages also.

As per your direction, I have pressed " Calib" Button for Proximity Sensor....

But still now its showing "Proximity ------ X: Stop Fail!......"......

What can i do now.

Thanks & Regards,

Guna

u can't install the cm7 dialler after syncing with any accounts.

just wipe and install ur rom. wait until it boots into the desktop.

then enter the recovery mode again and flash the dialler add on.

[Guest Snaku]

I'm having the same problem. ADB worked fine for all previous roms, just not this one. Restarted adb server few times. USB debugging toggled on/off few times, set to on, but still no adb. USB mass storage works fine.

Using windows 7 pro.

ADB is working here with this ROM, I'm also on W7 Pro. I use these files http://android.modac...ost__p__1766864

Hope this helps.

[Guest flshg]

ADB is working here with this ROM, I'm also on W7 Pro. I use these files http://android.modac...ost__p__1766864

Hope this helps.

Thanks for this Snaku, ADB working fine now. Time to launch into some modding and tweaking. I'm finding this rom to be fast, smooth, stable and good on battery as well, thanks burstlam.

[Guest gunapriyan]

Dear Mr.Enthusiast and Mr.Diehard,

Thanks for your replies.

I can feel the difference for my problem.

Thanks.

Kind Attn : Mr.Enthusiast,

I will try to wipe and install the ROM and then Dialler...

I will let you know if any issues come.

Thanks & Regards,

Guna

[Guest emppu67]

i got fc ,even with all wiped ,

[Guest timfimjim]

Dear Mr.Enthusiast,

This is my 3rd message to you today.

I request you to please see my previous 2 messages also.

As per your direction, I have pressed " Calib" Button for Proximity Sensor....

But still now its showing "Proximity ------ X: Stop Fail!......"......

What can i do now.

Thanks & Regards,

Guna

As flshg said...

Press calibrate, then put your phone to your ear, and it will say 'proximity is ok!

[Guest flshg]

An observation: in logcat, android seems to have an issue with a mismatched id on google backup transport. I dont use google backup so dont know if that might cause problems for those that do.

@burstlam what key do you use to sign the system apks with? I'm modding the systemui.apk and using my own key which seems to work, but would prefer to use the 'correct' key.

[Guest flshg]

After rebooting this rom I seem to have a problem with some of the system apps. Most importantly the settings.apk fails to load so I can't access the settings screen at all - says application not installed. I tried 'fix permissions' in CWM and clearing dalvik cache. Logcat seems to show problems with the certificates: http://pastebin.com/JJdneKp0

Anyone seen this before and know how to fix this without a full wipe (I think reflashing rom does a full wipe automatically so dont want to do that yet).

[Guest D Express]

I seem to be so naive. I like this rom and also prefer having xt9 input on it. I get the input as an addon from http://android.modaco.com/topic/348090-5th-nov-2011rombladeginger-negaraku-rls21-gen1-gen2-5th-nov/. However, I get "forced close" message when trying to use the xt9 keyboard. Could you please have a look to see if there is any chance to make the xt9 keyboard run on this rom?

[Guest gunapriyan]

Dear Friends,

Good Afternoon.

Really i like this ROM....Its fantastic.

I wish to notice one point in this ROM. (Weather Bug or Not)

In Call Log, Some time new no. may come. Long press on that new no, pop up is displaying. I have pressed to add to contacts and added.

But in call log the changes are not effected immediately.

Once close the call log and re-open, then only it takes place.

I hope that you can understand my language.

Need your valuable suggestions.

Regards,

Guna

I seem to be so naive. I like this rom and also prefer having xt9 input on it. I get the input as an addon from http://android.moda...1-gen2-5th-nov/. However, I get "forced close" message when trying to use the xt9 keyboard. Could you please have a look to see if there is any chance to make the xt9 keyboard run on this rom?

[Guest gunapriyan]

Dear Friends,

Good Afternoon.

Is there any new release in Libra Ginger?

Because I want more in Libra Ginger....Really superb ROM.

Thanks in advance.

Regards,

Guna

[Guest Cristian Gohl]

Hi,

I have V880 Gen2 from China Unicom.

I install, and cam don't work

RLS3.1

EDIT:

Hello,

As the cam is not working, I installed the Recovery Manager, I installed the recovery-clockwork-4.0.1.5-blade-gen2.

How did earlier for this build, rebooted to boot, and did not pass the screen Wo, after that time did not start, hung up the phone and started again.

The phone started normally, but the touch is not working.

How can I do to change the ROM now?

Edited January 12, 2012 by Cristian Gohl

[Guest Snaku]

I successfully flashed M-MHMP-RLS9-Undervolt-Kernel-Gen2.zip from http://android.modac...s9-android-235/ on LibraGinger RLS3.1 and it works perfectly sofar. Guess the difference between this rom and M-MHMP is minimal afterall ;)

This also fixes the wrong mV readings of the system (readings was multiplied with 1000, for instance discharge should be 3800mV, old kernel showed this as 3800000mV)

[Guest rdis]

Dear Friends,

Good Afternoon.

Is there any new release in Libra Ginger?

Because I want more in Libra Ginger....Really superb ROM.

Thanks in advance.

Regards,

Guna

As far as i know, In Hiapk android forum Libraginger been updated to release 4 on October 20. I can not give the link here because Burstlam must have had his own reasons why not share it here.

Edited January 15, 2012 by rdis

[Guest gunapriyan]

Dear Friends,

Good Evening.

Once again i am coming with new request.

Is there any update of this ROM?

Because i am using this ROM for the past 3 months and I am GEN1 Category.

Or can you suggest me for any good ROM (Gen1) like Libraginger?

Thanks & Regards,

Guna

[Guest zajith]

Hi Friends...

I own a ZTE Blade (Idea Blade from Idea cellular India). I had problem with camera and touch screen with CM7. After googling i came to know that Blade v800 and Idea Blade are same (not sure). Is my device compatible with LibraGinger RLS3.1. As per Mr.Pigfish app my device is GEN2.

Model number : ZTE-BLADE

Android version : 2.2.2

Baseband version : P729B01

Kernel version 2.6.32.9-perf zte-kernel@Zdroid-SMT

Build number : Iidf_P729VV1.0.0B02

[Guest Wallup]

Hi ! I just wanted to dl the roms but multiupload is down..