[ROM][GEN1-2-3] Moldovan Mile-High-Mountain-Pie RLS9 (Android 2.3.5)

[Guest agpoli]

Try reflashing, sometimes happens to me but that usually fixes it.

Thanks for the tip, I will do that. All I need is some free time to do it.

If it wont work, I will make a clean RLS8 install with the undervolted kernel. Will see...

[Guest C!chy]

Hi! I'm back to MMHMP :) thanks for new release KonstaT. Just flashed RLS8 - will test it for few days and most likely apply undervolting patch.

Can you people report undervolted system stability?

Edited January 11, 2012 by C!chy

[Guest ManMetDeHamer]

Hi! I'm back to MMHMP :) thanks for new release KonstaT. Just flashed RLS8 - will test it for few days and most likely apply undervolting patch.

Can you people report undervolted system stability?

been running it since he released it now and dint notice any problems with it yet

[Guest rdis]

Problem fixed for me by downgrading Titanium to version 3.9....

Problem fixed for me by UPGRADING Titanium to version 4.7.2 :D

[Guest ak167777]

Hello, I have updated my Gen1 to Gen2 RLS7 by TPT before.

I wanner try the RLS8 now ^_^

I have few questions,

1) Which rom is suitable for me?

Moldovan Mile-High-Mountain-Pie RLS8

or Moldovan Mile-High-Mountain-Pie RLS8 All in One TPT to upgrade?

2) should i extract all content into SD card before upgrade?

or just reboot into recovery mode, then upgrade zip from sdcard?

thanks a lot

[Guest Maxsas360]

Hello, I have updated my Gen1 to Gen2 RLS7 by TPT before.

I wanner try the RLS8 now ^_^

I have few questions,

1) Which rom is suitable for me?

Moldovan Mile-High-Mountain-Pie RLS8

or Moldovan Mile-High-Mountain-Pie RLS8 All in One TPT to upgrade?

2) should i extract all content into SD card before upgrade?

or just reboot into recovery mode, then upgrade zip from sdcard?

thanks a lot

1) Moldovan Mile-High-Mountain-Pie RLS8

2) Just reboot into recovery mode, advanced->wipe dalvik cache then upgrade zip from sdcard

I reccomend you this It undervolts your CPU when your CPU frequency is >=420Mhz and your Wifi chip. Seems to help to prolong usage time. Just flash it after flashing a rom

[Guest ak167777]

Thanks a lot ^__^

1) Moldovan Mile-High-Mountain-Pie RLS8

2) Just reboot into recovery mode, advanced->wipe dalvik cache then upgrade zip from sdcard

I reccomend you this http://android.modac...ost__p__1882465 It undervolts your CPU when your CPU frequency is >=420Mhz and your Wifi chip. Seems to help to prolong usage time. Just flash it after flashing a rom

[Guest Kaar3l]

Holy crap that is the smoothest rom ever. I flashed the undervolt kernel too and the battery usage seems awesome. (Y)

One problem too: I call someone, then screen turns black and I cannot hang up. How could I change that?

[Guest agpoli]

Holy crap that is the smoothest rom ever. I flashed the undervolt kernel too and the battery usage seems awesome. (Y)

One problem too: I call someone, then screen turns black and I cannot hang up. How could I change that?

Calibrate the proximity sensor with the ZTE Emode app.

Don't forget to put your finger on top of the sensor while calibrating.

[Guest KonstaT]

Holy crap that is the smoothest rom ever. I flashed the undervolt kernel too and the battery usage seems awesome. (Y)

One problem too: I call someone, then screen turns black and I cannot hang up. How could I change that?

Calibrate your proximity sensor. Settings -> ROM Settings -> ZTE Emode Helper -> Sensor test -> calib.

Calibrate the proximity sensor with the ZTE Emode app.

Don't forget to put your finger on top of the sensor while calibrating.

I don't think you should cover the sensor with anything while calibrating.

[Guest laserburn]

Does that undervolted kernel play nice if you want to overclock your CPU? :mellow: Anyone tried and can confirm it?

[Guest FollowWings]

Does that undervolted kernel play nice if you want to overclock your CPU? :mellow: Anyone tried and can confirm it?

I wanna know it too!

And how about an overvolted kernel for more mhz to come out from a tune? Because I think more volt needed for 806mhz to stay stable!

[Guest agpoli]

Calibrate your proximity sensor. Settings -> ROM Settings -> ZTE Emode Helper -> Sensor test -> calib.

I don't think you should cover the sensor with anything while calibrating.

That's the only way it works for me, thats why I'm suggesting it. This is how I do proximity calibration:

0. Make sure you're not covering the proximity sensor

1. Start ZTE emode helper

2. Choose Sensor Test [*#26***#]

3. Tap "calib" button (at this step it will display "Proximity Fail!")

4. Move my finger over the sensor (it will display "Proximity is ok!")

5. Tap "ok" button

6. That's all

[Guest KonstaT]

Does that undervolted kernel play nice if you want to overclock your CPU? :mellow: Anyone tried and can confirm it?

Only frequencies 480mhz and below are undervolted. It doesn't affect overclocking at all.

And how about an overvolted kernel for more mhz to come out from a tune? Because I think more volt needed for 806mhz to stay stable!

Overvolting isn't possible with this method.

Edited January 12, 2012 by KonstaT

[Guest quantam]

Well I like the ROM more than CM7 but am facing a few problem with titanium backup :( . Anyone facing same issues ? The phone restarts/the busy sign goes on forever while restoring .

EDIT:Fixed by downgrading to 4.2.1.Damn the newer releases are buggy :P .Anyway with APP2SDGUI this is a great ROM :) I simply love it :) .

PS:Is there a way I can add theme chooser?

Edited January 12, 2012 by quantam

[Guest ManMetDeHamer]

I would say no because theme chooser is a cm only application.

[Guest Cristian Gohl]

Hi, i have installed ROM(Moldovan-Mile-High-Mountain-Pie-RLS8) and -M-MHMP-RLS8-Stock-Kernel.

Cam OK;

GPS OK (NDrive 11);

Radio OK;

Points at Quadrant Standard Edition: 746

My cell is V880 from China Unicom(256ram ).

CPU:122,88 ~600 Mhz.

I didnt overclock. Someone did? how?

Thanks.

[Guest eirlysbill1]

use "no frills CPU control"

It should be in your app drawer, as it's included with the rom.

only increase CPU speed gradually, not too much at one time

sorry mate, I should have read you post better

Edited January 12, 2012 by eirlysbill1

[Guest KonstaT]

Hi, i have installed ROM(Moldovan-Mile-High-Mountain-Pie-RLS8) and -M-MHMP-RLS8-Stock-Kernel.

Cam OK;

GPS OK (NDrive 11);

Radio OK;

Points at Quadrant Standard Edition: 746

My cell is V880 from China Unicom(256ram ).

CPU:122,88 ~600 Mhz.

I didnt overclock. Someone did? how?

Thanks.

There is no overclock support in stock kernels. You need to use custom kernel to overclock.

Could you test this latest kernel in post #814 and report if camera and wifi work on you chinese blade?

[Guest Lord_Snake]

I'have a real strange bug. The notification bar (on the top of the screen) disappeared.

I've just:

1 - Wiped all!;

2 - Install ROM;

3 - Install Undervolted kernel (without boot the ROM);

4 - Boot; Reboot;

5 - Install Go Launcher Ex;

6 - OC to 710 + Smartass v2, as always;

6 - Install another apps...

When I noticed, the notification bar just disappeared and rebooting don't solve. I didn't restore anything with Titanium. It's an OSF OLED.

Do I need to reinstall the ROM again?? Or is someway to solve it?

Thank you.

[Guest flshg]

I'have a real strange bug. The notification bar (on the top of the screen) disappeared.

I've just:

1 - Wiped all!;

2 - Install ROM;

3 - Install Undervolted kernel (without boot the ROM);

4 - Boot; Reboot;

5 - Install Go Launcher Ex;

6 - OC to 710 + Smartass v2, as always;

6 - Install another apps...

When I noticed, the notification bar just disappeared and rebooting don't solve. I didn't restore anything with Titanium. It's an OSF OLED.

Do I need to reinstall the ROM again?? Or is someway to solve it?

Thank you.

Try wiping dalvik cache in clockworkmod

[Guest Lord_Snake]

Try wiping dalvik cache in clockworkmod

It didn't solve...

Oh, and Music App, always give me FC...

Can it be because I've a TPT Gen2?

Maybe I'll have to go back to F&C?

Edited January 12, 2012 by Lord_Snake

[Guest chaosfoevr]

Can I use this undervolt wit RLS7????

[Guest flshg]

Can I use this undervolt wit RLS7????

I'm using it with RLS6 and its working fine. Didn't even need to wipe dalvik cache.

[Guest chaosfoevr]

I'm using it with RLS6 and its working fine. Didn't even need to wipe dalvik cache.

Cool....I'll give it go rite away.......thanks