ZTE Blade TPTs

[Guest Huexxx]

Hi all!

My girlfriend has a Spanish GEN2 Yoigo Blade and I'm thinking in repartition the sub-optimal default layout.

- Any news with TPT over stock Yoigo GEN2 blades? As far as I can read, the method doesn't work on this specific model.

- The phone is stock GEN2, but could maybe yoigo have upgraded it from GEN1 before launch it? So, does someone have tried with G1-G2 v10a apart from G2 v2a? Can this attempt harm my phone, or it won't simply don't work?

- The available method then would be to do it via windows: http://www.modaco.com/topic/339048-guide-flashing-firmware-to-bladelibra-via-windows/ but I have some doubts...

-- The recommended pack is custom Gen2 160 v10 but I don't understand what exactly stands for... will this convert my stock GEN2 onto a GEN1-to-GEN2 phone? There isn't pure GEN2 packs with 160mb system partition to flash from windows?

-- Does this pack offer more partition space than pure GEN2 TPTs? Without contraindications?

-- Once I've flashed that, will I be able to use G1-to-G2 TPTs?

-- Once I've done it, is there a way to return to stock GEN2 TPT?

Regards and thanks!

[Guest thomasboyd]

I need to resize my caches to allow googleplay downloads again but having problems

I've installed TPT helper - I have European blade with Gen 2 rom

CM 7.2

Ive downloaded a Gen2 stock TPT

Unziped the file succesfully

Checked the image directory is matched

START TPT is not shown as supported by my current ROM

When I select 'Power Off to start the TPT' it powers off but does not boot into recovery just hangs on the android icon

I have to remove the battery before I can restart.

And one think they know whats happening?

[Guest lohikko]

Hi.

Does anyone know if there has been found any solution yet so Gen 3 blades can be TPT'd?

Thanks

[Guest princado]

Hi,

According to blade checker, I have an stock Gen2 blade. I have tried several times flashing the TPT for gen2 and I always get the eleven Error! messages. Have tried two sdcards, formatted to fat and fat32. Still nothing. Any tips?

[Guest Huexxx]

Use windows flasher method...

[Guest jesuita]

I have a generation 2 upgrade blade (told by blade checker) and currently have 138mb/316mb/2mb partition.

Im searching for a TPT that allows me to have the maximum data possible so i thought i would use the one with 128mb on system but that one only gives me 311mb for data... why is this?

138+316+2= 456

128+311+2= 441

Where are the remaining 15mb?

[Guest ososossy]

i want to install the new jb 4.1.2 rom here is the zte checker details

just used blade checker

European Blade 512 Ram detected

TPT upgraded gen2 phone detected

Use gen1 style TPts

Current partition sizes

system 160mb

data :294 mb

cache 2mb

if i want to repartition my phone to 220mb system the which tpt do i need to use?

here is the rom link : http://www.modaco.co...01-android-421/

as zte checker shows that system partition is 160 mb so can i proceed without flashing and tpt ? although i want to increase the system partition size so it would help me installing the bigger roms.as i am new to this stuff plz guide me :)

when i am trying to flash the tpts its giving error

Update from t-flash card!

error|

error|

Edited December 21, 2012 by ososossy

[Guest judas1977]

Konstat wrote that 160 is enough, so wipe all and just install;)

[Guest ro63rto]

On the first post, it says

" If you converted to Gen 2 by TPT, use the TPTs from here instead."

The link to those TPTs is no longer functioning.

I upgraded to Gen2 and installed an old CM 7.1 and want to know what I can upgrade to that is newer if they are any better.

Thanks

[Guest Amphoras]

On the first post, it says

" If you converted to Gen 2 by TPT, use the TPTs from here instead."

The link to those TPTs is no longer functioning.

I upgraded to Gen2 and installed an old CM 7.1 and want to know what I can upgrade to that is newer if they are any better.

Thanks

Something is wrong with the site, will try and work out what it is and fix it.

[Guest ehleh]

hey how to install this?

i already know :)

thanks :)

Edited January 31, 2013 by ehleh

[Guest mandeepsharma42]

i just want dell xcd35 (zte blade) original stock tpt

[Guest mandeepsharma42]

sorry for my english..

i want dell xcd35 stock tpt (stock image.bin)

thanks

[Guest thomasboyd]

How long should flashing take?

I restarted my blade about 20 minutes ago with menu +vol held down

and I see green text "Update from T-Flash card!

load /mmc1/image/qcsblhd_cfgdata.mbn"

But seems to just be hanging there..

[Guest Loki86]

it has to take a few seconds, 20 i think

are you sure you choose correct file? for your version gen1 or gen2

and do you check md5?

[Guest thomasboyd]

Its a gen2 V2a .ZIP

To be honest I was just amazed it was working.

Never has before.

If i click start TPT it says 'unsupported by this rom'

If I click power off to start TPT

It generally just hangs on the android screen

Like it never loads

[Guest thomasboyd]

can't get it to flash for love nor money anymore..

not sure what I might have done before to get it working

Holding down Menu & Volume + straight after restarting :(

[Guest De@n]

can't get it to flash for love nor money anymore..

not sure what I might have done before to get it working

Holding down Menu & Volume + straight after restarting :(

1. Extract 'image' to root of SD

2. Shutdown phone

3. Wait 30sec or so

4. Power on with menu & vol+ held

[Guest thomasboyd]

Sorry I feel stupid but

Should I be pressing menu & volume + simultaneously while pressing the power?

or Just after?

I thought pressing power & menu sends android into a recovery mode by default.

Would explain why it hangs.

Do I need to use the TPT helper restart option or will a normal restart work just as well?

[Guest De@n]

Sorry I feel stupid but

Should I be pressing menu & volume + simultaneously while pressing the power?

Yep :)

Edited February 27, 2013 by De@n

[Guest thomasboyd]

Yep :)

And will this process wipe out everything?

What will i loose?

[Guest chgergo]

Hi Everyone!

I am new in this forum, maybe someone can help me.

I am trying to change the partition size with TPT helper using blade checker.

It says:

European Blade

Syock-win gen2

image.bin style

current partition: 138-301-2

Everything goes fine, checking shows 13/13 files are OK until I try to get to bootloader

When I power on pressing menu and vol up just gives me the boot logo even if i waited for 20 minutes.

It seems the phone does not start anything, just hangs.

Furthermore I have tried wthe process with a known working "image.bin" file placed into the "image" directory of the SD card giving the same result: I have followed the TPT helper guide step by step, everything goes fine except to reboot into bootloader.

I have also made a downgrage to cyanogenmod 7.2 and tried the TPT process - no success

I was wondering the previous partition change causes the problem.

It has been done by the image file in G2-TPT-KonstaKANG.zip recommended for that version.

Maybe earlier I had G1 converted ZTE and I have applied this stock G2 partition? Is this the reason I can not run bootloader?

Thanks.

[Guest thomasboyd]

Yeah I see the exact same problem if you press power upon restarting it just hangs with the green android.

I have once managed to get the TPT bootloader to start but then it just hanged when trying to apply the image.

Im not sure how I managed that one time to get it working.. it just did

[Guest mitchde]

Q: Is it possible to have an special TPT to set my europ BLADE (BASE, stock gen 2) back to original in one step ? I mean partitions stock and back to Android BASE (2.1/2) stock in one step?

I ask because i give it back to Eplus/BASE in may. Dont think they like CM10 on it ;)

[Guest thomasboyd]

I think I figured out the problem is my 'ZTE blade' (orange sanfransico) despite being bought in the UK was made in China

What TPT should I use for a Chinese blade?