[KERNEL] TechnoLover's Kernel Edition 1.5 (25.06.2012)

[Guest CryLies]

Maybe still a little lag with the power button but exist again

[Guest TechnoLover]

At 1.4c noticed feature of the host, using the power problems disappear if the wi-fi included, but is turned off, everything returns. As for logs, I did nenashel where there is a button in Mt control for their export to the sd.

After a couple of hours in sleep mode enabled wi-fi, the problem reappeared (((...

In MT Control1.4 it's at the bottom of the list.

[Guest Pinguy]

YAY! all good now :)

And WOW! This is a pretty big improvement over 1.3a, its a lot smother going though the menus. Thank you so much. Expect a donation on the 1st of April :) (lol just realized the date, its not a joke)

TechnoLover you have done an amazing thing with this kernel. You have turned a sub-par phone into a pretty high performance one, and for that I thank you.

Sent the donation, have a beer on me :) Thanks for the kernel.

Think I may of found a bug in 1.4c, Dolby Mobile doesn't seem to work. I need to look into it more as it maybe a fault with the ROM (but it was working on the older kernel).

Edited March 30, 2012 by Pinguy

[Guest VJftw]

Tried out WiFi AP with a friend today, worked great! thanks :)

[Guest SLBoy]

Power button issue still stands on 1.4c, gonna go back to 1.3a again :mellow:

[Guest fabiorino]

What voltages did you set?

Edited April 1, 2012 by fabiorino

[Guest harylauw]

Hello technolover thank you for 1.4c now accelometer works but may i ask, anyone here compares speed of accelometer of 1.4c is slower than 1.3a (you may feel it when playing games like temple run), is it just my feeling or i missed something? thank you

[Guest SLBoy]

What voltages did you set?

122 - 1200mhz

[Guest fabiorino]

122 - 1200mhz

Thanks. I setted 122-1024 with your voltages but 122@750mv

[Guest Xorz1st]

Got power button issue with 1.4c too. Higher voltages don't solve the problem for me. But I keep cool and wait for an update :)

Don't have problems with Dolby mobile like Pinguy.

If you got problems send Technolover your logfile, it could help him ;)

[Guest omar_ita]

I installed it over the "Performance Rom" from Pinguy.. works perfectly, apart that sometimes there is a little lag between the press of power button and the screen activation.. Sometime I have to press twice. Is it normal? :-)

Thank you a lot for your work!!

[Guest CryLies]

I installed it over the "Performance Rom" from Pinguy.. works perfectly, apart that sometimes there is a little lag between the press of power button and the screen activation.. Sometime I have to press twice. Is it normal? :-)

Thank you a lot for your work!!

Ciao, purtroppo il lag permane... soprattutto se premi il tasto dopo averlo appena mandato in stand-by :(

Hello, unfortunately still lag ... especially if you press the button after having just sent in stand-by

[Guest onur10ur]

hi everyone.i couldn't this rom.because there are a lot of parts in download link. So ,which part of them do i need to download ??? nice day

[Guest coffeedrinker]

hi everyone.i couldn't this rom.because there are a lot of parts in download link. So ,which part of them do i need to download ??? nice day

which ROM are you currently using ?

[Guest omar_ita]

Ciao, purtroppo il lag permane... soprattutto se premi il tasto dopo averlo appena mandato in stand-by :(

Hello, unfortunately still lag ... especially if you press the button after having just sent in stand-by

Did it again! :-( I turned on the phone few minutes ag,o and the screen went black, only the button remained lighted.

The only thing possible was to remove the battery :-( Should I install the v1.2 ?

Edited April 2, 2012 by omar_ita

[Guest Lens_flare]

I'm ready to finish the war ( that wasn't started though) to bring fully working ics.

If you, Techno, forgave me, there is the only task for you: porting usb gadget from 3.0 kernel as you xperienced more than me on kernals.

if you could of course..

[Guest fabiorino]

When are you going to release it?

[Guest CryLies]

My configuration:

Kernel TechnoLover 1.3a

Rom T&L 2.3.6.13

I use SetCpu for Cpu Voltage (368Mhz - 1200Mhz)

I use MtControl for Gpu Voltage (245Mhz Idle and 384 Mhz With Virtua Tennis, Dead Space, Dungeon Hunter 3, Real Racing 2)

All Perfect with this configuration

[Guest vidalix]

I'm ready to finish the war ( that wasn't started though) to bring fully working ics.

If you, Techno, forgave me, there is the only task for you: porting usb gadget from 3.0 kernel as you xperienced more than me on kernals.

if you could of course..

.... and are mobile data working also for the usim?

[Guest SLBoy]

Techno, sorry to bother you, can you check the log? Because my phone still gets slower once I use the camera or just watch a video, maybe the log can help you fix this problem, since other users seem to have this problem too.

Thanks in advance ;)

LogcatDmesg.rar

Edited April 3, 2012 by SLBoy

[Guest onur10ur]

which ROM are you currently using ?

i using miui

[Guest coffeedrinker]

i using miui

CyanogenMod/MiUi (Download CM-Version)

There are 2 versions, 1% and 5% which refer to the battery charging status. some people have trouble with 1% version.

1.4c is the latest update. I don't use CM/Miui perhaps someone else can say what is working best for them.

[Guest fypa33]

Hi technolover,

Since there is still a problem with power button with the versions beyond 1.3a, when do you think you're gonna fix it? Are you going to put 1.5 version online?

Thanks for your work.

[Guest Eduard1234]

why doesn't work the camera with 1.4c? i have the performance rom.....

[Guest chemicalbuz]

why doesn't work the camera with 1.4c? i have the performance rom.....

that's not a kernel issue for sure