Guest davidevinavil Posted December 26, 2011 Report Posted December 26, 2011 Thanks for the quick reply. OK, this is good news, I've just downloaded all af the differant voltage boots. I'll start from low and work my way up to hi. How do I actually change the boot thingy? Can i just put the zip file on my sdcard and then 'install .zip from from sdcard' via clockworkmod recovery or do i need to manually replace the boot from cm7.10.zip with a differant one and then flash the whole thing? Also what are the differances between your latest release and lensflare's? Thanks again Different from two cm7 rom are minimal.. For sure use different egl lib.. About boot you have to flash as update.zip after flashed cm7 and without wipe..
Guest qu1cks1lver Posted December 27, 2011 Report Posted December 27, 2011 Different from two cm7 rom are minimal.. For sure use different egl lib.. About boot you have to flash as update.zip after flashed cm7 and without wipe.. Thanks so much! Everythings running fine now, but for some reason my phone was unstable on all of those boot images apart from the hi voltage one. Just out of interest, what are the advantages of the lower voltages? Is it just battery life?
Guest davidevinavil Posted December 27, 2011 Report Posted December 27, 2011 Thanks so much! Everythings running fine now, but for some reason my phone was unstable on all of those boot images apart from the hi voltage one. Just out of interest, what are the advantages of the lower voltages? Is it just battery life? Yes just battery life. I'm sorry but you are unlucky ;)
Guest davidevinavil Posted December 27, 2011 Report Posted December 27, 2011 to avoid confusion and to not remove the lens-flare merits I decided to load no more roms compiled by me
Guest evil.odmin Posted December 27, 2011 Report Posted December 27, 2011 to avoid confusion and to not remove the lens-flare merits I decided to load no more roms compiled by me Where download boot.img by you???
Guest k0zmic Posted December 27, 2011 Report Posted December 27, 2011 (edited) Bit of a small problem. When trying to backup this ROM with AmonRa Recovery 2.2 with an EXT3 partition (need it to use S2E for A2SD) it doesn't recognize EXT partition and hence, skips it. I verified that there is a folder called 'sd' under the system directory that is usually the problem with Recovery 2.2 skipping EXT backups. Recovery 2.2 didn't have any problems backing up EXT2 partitions so is Recovery 2.2 incompatible with EXT3 partitions? I also tried with ClockworkMod but that skipped it as well. Edited December 27, 2011 by k0zmic
Guest pigio92 Posted December 27, 2011 Report Posted December 27, 2011 it works very well this rom. But led message notification don't works with handcent sms??
Guest duffman76 Posted December 27, 2011 Report Posted December 27, 2011 it works very well this rom. But led message notification don't works with handcent sms?? I could not get led message notification with handcent to work on the stock acer rom so i don't think it would work on a custom rom like Cm7 either. Maybe i am wrong though???
Guest Eduard1234 Posted December 27, 2011 Report Posted December 27, 2011 Hi , i am new ( sorry for my bad english , but i am italian ) , i'd like to install this rom , i have t&l ( this i fantastic , but i want to try cm7 ) , i have vache ' s recovery 3 , i had rooted 2.3.6 and after that i flashed t&l , how can i flash this rom ? P.S. i didn't have problems to install official rom 2.3.6 / vache ' s recovery / root this acer liquid mt / flash t&l
Guest Lens_flare Posted December 27, 2011 Report Posted December 27, 2011 how can i flash this rom ? Boot into recovery, do wipes on main menu (data&cache) and install rom.
Guest Eduard1234 Posted December 27, 2011 Report Posted December 27, 2011 Boot into recovery, do wipes on main menu (data&cache) and install rom. Ok, thanks a lot :)
Guest Eduard1234 Posted December 27, 2011 Report Posted December 27, 2011 (edited) An another thing : There are problems with boot or other things? I must install davidevinavil ' s kernel ? What change from original kernel ? And overclock ruin processor ? Edited December 27, 2011 by Eduard1234
Guest scotth324 Posted December 27, 2011 Report Posted December 27, 2011 Was going to try the CM7 today but the download link on the front page is gone. Excited to see if it will work now for me with the SIM card working.
Guest davidevinavil Posted December 27, 2011 Report Posted December 27, 2011 Where download boot.img by you??? Check first post.. I update them with sd patch
Guest davidevinavil Posted December 27, 2011 Report Posted December 27, 2011 Was going to try the CM7 today but the download link on the front page is gone. Excited to see if it will work now for me with the SIM card working. It was on first post and still be there ;)
Guest scotth324 Posted December 27, 2011 Report Posted December 27, 2011 They are back up now. The main CM7 from Lens was there but the different boots at the time were not. Didn't want to get stuck with a boot that didn't work. Will try it out today. Thank you, Scott
Guest davidevinavil Posted December 27, 2011 Report Posted December 27, 2011 They are back up now. The main CM7 from Lens was there but the different boots at the time were not. Didn't want to get stuck with a boot that didn't work. Will try it out today. Thank you, Scott Yes you are right.. I had to reupload to give you SD card fix
Guest scotth324 Posted December 28, 2011 Report Posted December 28, 2011 I flashed cm7 after doing full wiping of everything. It installed and started up fine. But it wont let me pick my network operator and it is on the wrong network and it doesn't work. Data wont work at all. Recognized Tbaytel/Rogers which is what I need for a few seconds and then kicked off it and said the network I wanted was not available at the time. Also gave me an error message when searching for a network. Was just working with T&L a few minutes ago. Have no clue what this problem is. I have a Liquid A1 that gives me the same error message and will not connect to Tbaytel/Rogers but will connect to AT&T. I never have been able to make that phone work here. It is running cm7 as well. Maybe I can't run cm7 here. If you guys have an idea of what is going on here or if anyone has run into this before on the Liquid A1 it may be related.
Guest Lens_flare Posted December 28, 2011 Report Posted December 28, 2011 (edited) Ok, seems you are CDMA user, devs are GSM users, so we can't predict how it will work with that link type or even fix that. Qcomm RIL originally provides CDMA/GSM support, that's why it works on stock. About liquid A1: it can't be true :P that device has Qcomm ril too, but more reliable for devs, so that it hasn't been modified. Edited December 28, 2011 by Lens_flare
Guest Eduard1234 Posted December 28, 2011 Report Posted December 28, 2011 Here my kernel source for cm7 Kernel_source.zip Here mine kernel with different cpu voltage Boot_cm7_ultra_low_voltage.zip Boot_cm7_low_voltage.zip Boot_cm7_mid_voltage.zip Boot_cm7_high_voltage.zip i have a questions : What change your kernel from original kernel ? What boot is with 800 Mhz ?
Guest Lens_flare Posted December 28, 2011 Report Posted December 28, 2011 What change your kernel from original kernel ?What boot is with 800 Mhz ? Many changes, all of them are CM-related and useless (or maybe harmful) for stock rom. All boots have 800mhz stock frequency.
Guest Eduard1234 Posted December 28, 2011 Report Posted December 28, 2011 ok , but i must install this kernel ?
Guest Lens_flare Posted December 28, 2011 Report Posted December 28, 2011 It's just for experiments :P They have the same features as main kernel but voltage level..
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now