Jump to content

[DEV] AOSP Dev for Zte Blade

Guest t0mm13b

By Guest t0mm13b
in ZTE Blade / Libra ROMs & ROM customisation

 Share

Recommended Posts

Guest hedgepigdaniel

Guest hedgepigdaniel

Posted
Posted (edited)

Have patched java's RIL.java in frameworks/base/telephony/java/com/android/internal/telephony with those specifed on the cm-nightlies.appspot.com, added the key 'ro.telephony.ril.v3=1' into build.prop. Rebooted, no joy, rild crashes like hell, am hesitant to push out that to github as my belief is cm7's rild stuff is very much hated by ICS.

Suggestions? :)

Edit:

IF you wish, unzip the attached and put that into the directory above, amend build.prop with said key, and do a clean build ... let us know how it goes, if that works for you :) then we can take it from there :)

Results (fully compiled from the latest github sources + the above instructions):

ics4blade alpha3

download: http://www.mediafire...dqshhxd7up571z8

gapps: http://download.cloc...-20111125-2.zip

requires gen2 and stock sized system partition

Still no reception - although you might want to have a look at log output etc. I didn't notice any crashes.

Edited by hedgepigdaniel
  • Replies 938
  • Created
  • Last Reply

Popular Days

Popular Days

Popular Posts

Guest John Enter
Guest John Enter

Please people if you don't know anything about this then don't post. The devs are doing this for free, and if you want ICS on your blade as soon as possible then let them do their job without them ge

Guest FelixL
Guest FelixL

laguna2763: I've reported your posts to a moderator and hope you get a warning. All necessary information is on the last pages, and this thread is NOT FOR NOOBS. Guys like you slow down the developme

Guest davidnintendo
Guest davidnintendo

Great news, everyone! Apparently hardware acceleration is now working on the Desire and the HTC HD2, both with the Adreno 200 GPU like the Blade! http://forum.xda-developers.com/showthread.php?t=1

Posted Images

Guest t181

Guest t181

Posted
Posted

Results (fully compiled from the latest github sources + the above instructions):

ics4blade alpha3

download: http://www.mediafire...dqshhxd7up571z8

gapps: http://download.cloc...-20111125-2.zip

requires gen2 and stock sized system partition

Still no reception - although you might want to have a look at log output etc. I didn't notice any crashes.

Is this contains the new functions? (like sd card mounting, phone functions...)

Guest t0mm13b

Guest t0mm13b

Posted
Posted

Anyone try the patched RIL.java, last I checked there was 19 downloads of the said file - did it help? or did Telephony's fail? :)

Guest t0mm13b

Guest t0mm13b

Posted
Posted (edited)

Results (fully compiled from the latest github sources + the above instructions):

ics4blade alpha3

download: http://www.mediafire...dqshhxd7up571z8

gapps: http://download.cloc...-20111125-2.zip

requires gen2 and stock sized system partition

Still no reception - although you might want to have a look at log output etc. I didn't notice any crashes.

@fp30, @hedgepigdaniel:

This is in my adb logcat

D/dalvikvm( 526): GC_CONCURRENT freed 704K, 20% free 11803K/14599K, paused 4ms+11ms

I/ActivityManager( 142): Displayed com.android.settings/.ApnSettings: +1s182ms

F/libc ( 1911): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1)

I/DEBUG ( 859): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***

I/DEBUG ( 859): Build fingerprint: 'generic/zte_blade/blade:4.0.1/ITL41D/eng.t0mm13b.20111121.234834:eng/test-keys'

I/DEBUG ( 859): pid: 1911, tid: 1911 >>> /system/bin/rild <<<

I/DEBUG ( 859): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr deadbaad

I/DEBUG ( 859): r0 deadbaad r1 80000000 r2 00000027 r3 00000000

I/DEBUG ( 859): r4 00000000 r5 00000080 r6 40454581 r7 00000000

I/DEBUG ( 859): r8 00000000 r9 00000000 10 00000000 fp 00000000

I/DEBUG ( 859): ip ffffffff sp bea3b840 lr 4001ee5b pc 4001b63e cpsr 00000030

I/DEBUG ( 859): #00 pc 0001763e /system/lib/libc.so

I/DEBUG ( 859): #01 pc 0000fc04 /system/lib/libdss.so (dsc_abort)

I/DEBUG ( 859): #02 pc 0000fc04 /system/lib/libdss.so (dsc_abort)

I/DEBUG ( 859): #03 pc 0000db34 /system/lib/libdss.so

I/DEBUG ( 859): #04 pc 0000dd34 /system/lib/libdss.so (dsc_qmi_init)

I/DEBUG ( 859): #05 pc 0000c68c /system/lib/libdss.so (dsc_main)

I/DEBUG ( 859): #06 pc 000a7520 /system/lib/libril-qc-1.so (dsi_init)

I/DEBUG ( 859): #07 pc 0009bce8 /system/lib/libril-qc-1.so (qcril_data_init)

I/DEBUG ( 859): #08 pc 00025248 /system/lib/libril-qc-1.so (qcril_init)

I/DEBUG ( 859): #09 pc 00025904 /system/lib/libril-qc-1.so (RIL_Init)

I/DEBUG ( 859): #10 pc 00008ea2 /system/bin/rild

I/DEBUG ( 859): #11 pc 000164c6 /system/lib/libc.so (__libc_init)

I/DEBUG ( 859):

I/DEBUG ( 859): code around pc:

I/DEBUG ( 859): 4001b61c 1c2bd00c 2d00682d e027d1fb 2a0068da

I/DEBUG ( 859): 4001b62c 4b16d004 447b2001 47906018 22274814

I/DEBUG ( 859): 4001b63c 70022580 ef80f7f4 f7f62106 2400e810

I/DEBUG ( 859): 4001b64c 0569aa01 60546091 20061c11 f7f59401

I/DEBUG ( 859): 4001b65c a905ebda 20022200 ebe2f7f5 ef6cf7f4

I/DEBUG ( 859):

I/DEBUG ( 859): code around lr:

I/DEBUG ( 859): 4001ee38 4b0db5f0 9001b083 681c447b 68a52600

I/DEBUG ( 859): 4001ee48 e0086867 5ea8220c dd032800 99011c28

I/DEBUG ( 859): 4001ee58 43064788 3f013554 6824d5f4 d1ee2c00

I/DEBUG ( 859): 4001ee68 1c30b003 46c0bdf0 000286a4 1c0fb5f0

I/DEBUG ( 859): 4001ee78 43551c3d a906b089 9103604d 90064914

I/DEBUG ( 859):

I/DEBUG ( 859): stack:

I/DEBUG ( 859): bea3b800 4038919c

I/DEBUG ( 859): bea3b804 40387127 /system/lib/libdiag.so

I/DEBUG ( 859): bea3b808 40047720

I/DEBUG ( 859): bea3b80c 400476b0

I/DEBUG ( 859): bea3b810 00000000

I/DEBUG ( 859): bea3b814 4001ee5b /system/lib/libc.so

I/DEBUG ( 859): bea3b818 00000000

I/DEBUG ( 859): bea3b81c 4001dbb9 /system/lib/libc.so

I/DEBUG ( 859): bea3b820 401d45be /system/lib/libril-qc-1.so

I/DEBUG ( 859): bea3b824 00000000

I/DEBUG ( 859): bea3b828 00000000

I/DEBUG ( 859): bea3b82c 40454581 /system/lib/libdss.so

I/DEBUG ( 859): bea3b830 00000000

I/DEBUG ( 859): bea3b834 4001dfd1 /system/lib/libc.so

I/DEBUG ( 859): bea3b838 df0027ad

I/DEBUG ( 859): bea3b83c 00000000

I/DEBUG ( 859): #00 bea3b840 0000000e

I/DEBUG ( 859): bea3b844 40453a15 /system/lib/libdss.so

I/DEBUG ( 859): bea3b848 bea3b8b0

I/DEBUG ( 859): bea3b84c 00000000

I/DEBUG ( 859): bea3b850 00000000

I/DEBUG ( 859): bea3b854 fffffbdf

I/DEBUG ( 859): bea3b858 404583a4

I/DEBUG ( 859): bea3b85c 40457614

I/DEBUG ( 859): bea3b860 404583a4

I/DEBUG ( 859): bea3b864 40450c07 /system/lib/libdss.so

I/DEBUG ( 859): #01 bea3b868 40457614

I/DEBUG ( 859): bea3b86c 40450c07 /system/lib/libdss.so

I/BootReceiver( 142): Copying /data/tombstones/tombstone_08 to DropBox (SYSTEM_TOMBSTONE)

D/QCRIL ( 1944): Event thread waiting for started == 2 (1)

I/QCRIL ( 1944): qcril_event_init(): event thread started

D/dalvikvm( 142): GC_CONCURRENT freed 1536K, 17% free 12288K/14791K, paused 5ms+23ms

E/QCRIL ( 1944): RadioState Uninitialized --> Radio Unavailable [Event PowerUpInit]

E/QCRIL ( 1944): qcril_reqlist_init()

E/QCRIL ( 1944): qcril_cm_clist_init()

E/QCRIL ( 1944): qcril_cm_ons_init()

E/QCRIL ( 1944): qcril_cm_init()

E/QCRIL ( 1944): GW Subscription disabled

E/QCRIL ( 1944): CDMA Subscription disabled

E/QCRIL ( 1944): CLIR=0

I/QCRIL ( 1944): RIL=>AMSS [ label = "nv_cmd_remote() - Read NV_FTM_MODE_I" ];

E/QCRIL ( 1944): Read NV_FTM_MODE_I: status 0 value 0

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_client_init()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_client_ph_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_mm_client_ss_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_mm_client_ss_pwr_collapse_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_mm_client_ss_pwr_collapse_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_mm_client_ss_pwr_collapse_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_mm_client_ph_pwr_collapse_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_mm_client_call_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_mm_client_inband_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_client_sups_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "cm_client_act()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_client_init()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_client_reg_cfg_cb()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_client_reg_msg_cb()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_client_reg_bc_mm_cb()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_client_activate()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_cfg_set_primary_client()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_cfg_set_routes()" ];

I/QCRIL ( 1944): Received SMS cmd callback : Cmd WMS_CMD_CFG_SET_PRIMARY_CLIENT, Token ID 65534

I/QCRIL ( 1944): Queued event SMS_COMMAND_CALLBACK (8 bytes)

I/QCRIL ( 1944): RIL=>AMSS [ label = "wms_msg_set_retry_period(240 sec.)" ];

E/QCRIL ( 1944): eccupdateThread(): enter

I/QCRIL ( 1944): Received SMS cmd callback : Cmd WMS_CMD_CFG_SET_ROUTES, Token ID 65534

I/QCRIL ( 1944): Queued event SMS_COMMAND_CALLBACK (8 bytes)

I/QCRIL ( 1944): qcril_pbm_init

I/QCRIL ( 1944): qcril_pbm_clear_ecc_list: Clear the ecc List

I/QCRIL ( 1944): qcril_pbm_clear_ecc_list: Clear the ecc List

I/QCRIL ( 1944): RIL=>AMSS [ label = "pbm_notify_register()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "pbm_notify_unregister()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "pbm_notify_register()" ];

I/QCRIL ( 1944): qcril_mmgsdi_init

I/QCRIL ( 1944): RIL=>AMSS [ label = "mmgsdi_client_id_reg()" ];

I/QCRIL ( 1944): RIL=>AMSS [ label = "gsdi_perso_register_task()" ];

E/QCRIL ( 1944): qcril_gstk_init

I/QCRIL ( 1944): RIL=>AMSS [ label = "gstk_client_init_ext()" ];

I/QCRIL ( 1944): qcril_mmgsdi_perso_event_callback (event: 0x34)

I/QCRIL ( 1944): Queued event MMGSDI_PERSO_EVENT_CALLBACK (20 bytes)

I/QCRIL ( 1944): qcril_mmgsdi_gsdi_command_callback, cmd:17

I/QCRIL ( 1944): Queued event MMGSDI_GSDI_COMMAND_CALLBACK (336 bytes)

I/QCRIL ( 1944): CLIENT_INIT_EXT success

E/QCRIL ( 1944): qcril_data_init: ENTRY

E/QCRIL ( 1944): dsi_init: ENTRY

I/QCRIL ( 1944): dsc_main has been included

I/QCRIL ( 1944): qcril_gstk_client_init_callback: status 0, client ID 0x00000003

I/QCRIL ( 1944): Queued event GSTK_CLIENT_INIT_CALLBACK (12 bytes)

I/QCRIL ( 1944): qcril_mmgsdi_command_callback: cnf = 0x0, status = 0x0

I/QCRIL ( 1944): qcril_mmgsdi_command_callback qcril_event_queue2

I/QCRIL ( 1944): Queued event MMGSDI_COMMAND_CALLBACK (260 bytes)

D/dalvikvm( 142): GC_FOR_ALLOC freed 380K, 17% free 12420K/14791K, paused 101ms

D/dalvikvm( 142): GC_CONCURRENT freed 564K, 17% free 12383K/14791K, paused 5ms+9ms

Weird that rild crashes... any insights?

Edit:

The libc that is shown in the line after ActivityManager, is the point of the crash, by the way, this was when I was in APN settings. The part of the stack trace up to the point of crash rests solely with libril-qc-1.so, for some reason or another which calls something in libdss and bombs!

Edited by t0mm13b
Guest hedgepigdaniel

Guest hedgepigdaniel

Posted
Posted (edited)

Anyone try the patched RIL.java, last I checked there was 19 downloads of the said file - did it help? or did Telephony's fail? :)

I compiled it into alpha3, you can try that if you want. not sure what to look for, but there was no reception and I didn't notice any crashes.

Edit: I don't know what to say about that log but SYSTEM_TOMBSTONE sounds like something really evil is going on.

Edited by hedgepigdaniel
Guest KonstaT

Guest KonstaT

Posted
Posted

Sdcard working. Media scanner works too. Add these to your init.rc:



# create mountpoints

    mkdir /mnt 0775 root system

    mkdir /mnt/sdcard 0000 system system

[/code]



[code]

# setup the global environment

    export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin

    export LD_LIBRARY_PATH /vendor/lib:/system/lib

    export ANDROID_BOOTLOGO 1

    export ANDROID_ROOT /system

    export ANDROID_ASSETS /system/app

    export ANDROID_DATA /data

    export EXTERNAL_STORAGE /mnt/sdcard

    export ASEC_MOUNTPOINT /mnt/asec

    export LOOP_MOUNTPOINT /mnt/obb




# Backward compatibility

    symlink /system/etc /etc

    symlink /sys/kernel/debug /d

    symlink /mnt/sdcard /sdcard

[/code]





Attached boot.img in flashable zip with this fixed. Should be also included after this.
Blade-ICS-SDfix.zip
Guest t0mm13b

Guest t0mm13b

Posted
Posted

Also, for the bluetooth:

I/bluedroid( 137): Starting hciattach daemon

E/qcom-bluetooth( 881): /system/etc/init.bt.sh: Bluetooth QSoC firmware download failed: exit code 1

D/dalvikvm( 137): GC_CONCURRENT freed 530K, 14% free 11903K/13703K, paused 5ms+11ms

E/bluedroid( 137): bt_enable: Timeout waiting for HCI device to come up, error- -1,

E/BluetoothAdapterStateMachine( 137): failed to prepare bluetooth, abort turning on

D/BluetoothAdapterStateMachine( 137): Bluetooth state 11 -> 10

V/BluetoothEventManager( 549): Received android.bluetooth.adapter.action.STATE_CHANGED

D/DockEventReceiver( 549): finishStartingService: stopping service

But then again, this is related to getting the radio working... :)

Guest fp30

Guest fp30

Posted
Posted

Weird that rild crashes... any insights?

Edit:

The libc that is shown in the line after ActivityManager, is the point of the crash, by the way, this was when I was in APN settings. The part of the stack trace up to the point of crash rests solely with libril-qc-1.so, for some reason or another which calls something in libdss and bombs!

hmmm doesnt look so good. worse than I have without the patched ril.java file!

Do you manage to get a ril socket open though with the patches?? they seem to just patch a load of declarations not much actual code changed.

I figured we are still at 


try {for (;;) {

            	LocalSocket s = null;

            	LocalSocketAddress l;


            	try {

                	s = new LocalSocket();

                	l = new LocalSocketAddress(SOCKET_NAME_RIL,

                        	LocalSocketAddress.Namespace.RESERVED);

                	s.connect(l);

            	} catch (IOException ex){

                	try {

                    	if (s != null) {

                        	s.close();

                    	}

                	} catch (IOException ex2) {

                    	//ignore failure to close after failure to connect

                	}


                	// don't print an error message after the the first time

                	// or after the 8th time


                	if (retryCount == 8) {

                    	Log.e (LOG_TAG,

                        	"Couldn't find '" + SOCKET_NAME_RIL

                        	+ "' socket after " + retryCount

                        	+ " times, continuing to retry silently");

                	} else if (retryCount > 0 && retryCount < 8) {

                    	Log.i (LOG_TAG,

                        	"Couldn't find '" + SOCKET_NAME_RIL

                        	+ "' socket; retrying after timeout");

                	}


                	try {

                    	Thread.sleep(SOCKET_OPEN_RETRY_MILLIS);

                	} catch (InterruptedException er) {

                	}


                	retryCount++;

                	continue;

            	}

s.connect(l); doesnt seem to be working

Guest t0mm13b

Guest t0mm13b

Posted
Posted

hmmm doesnt look so good. worse than I have without the patched ril.java file!

Do you manage to get a ril socket open though with the patches?? they seem to just patch a load of declarations not much actual code changed.

I figured we are still at 


try {for (;;) {

            	LocalSocket s = null;

            	LocalSocketAddress l;


            	try {

                	s = new LocalSocket();

                	l = new LocalSocketAddress(SOCKET_NAME_RIL,

                        	LocalSocketAddress.Namespace.RESERVED);

                	s.connect(l);

            	} catch (IOException ex){

                	try {

                    	if (s != null) {

                        	s.close();

                    	}

                	} catch (IOException ex2) {

                    	//ignore failure to close after failure to connect

                	}


                	// don't print an error message after the the first time

                	// or after the 8th time


                	if (retryCount == 8) {

                    	Log.e (LOG_TAG,

                        	"Couldn't find '" + SOCKET_NAME_RIL

                        	+ "' socket after " + retryCount

                        	+ " times, continuing to retry silently");

                	} else if (retryCount > 0 && retryCount < 8) {

                    	Log.i (LOG_TAG,

                        	"Couldn't find '" + SOCKET_NAME_RIL

                        	+ "' socket; retrying after timeout");

                	}


                	try {

                    	Thread.sleep(SOCKET_OPEN_RETRY_MILLIS);

                	} catch (InterruptedException er) {

                	}


                	retryCount++;

                	continue;

            	}

s.connect(l); doesnt seem to be working

Absolutely, something is amiss there and agree totally, I have the rild socket there alright, every now and then it bombs and restarts itself, and occasionally fails to load on boot up as well.. either something in the init.rc, ueventd.rc or something, am not 100% sure where exactly is the cause/reason of it is... still digging up .. :)

Guest fp30

Guest fp30

Posted
Posted

Absolutely, something is amiss there and agree totally, I have the rild socket there alright, every now and then it bombs and restarts itself, and occasionally fails to load on boot up as well.. either something in the init.rc, ueventd.rc or something, am not 100% sure where exactly is the cause/reason of it is... still digging up .. :)

thats strange. I wonder why I wasnt getting a rild socket at all then. I compared the init.rc to a GB one and to the Hero ICS one and the rild stuff seems ok.

Comparing to MHMP there was one difference in the groups, MHMP:


service ril-daemon /system/bin/rild

	socket rild stream 660 root radio

	socket rild-debug stream 660 radio system

	user root

	group radio cache inet misc audio sdcard_rw qcom_oncrpc
ICS 

service ril-daemon /system/bin/rild

	class main

	socket rild stream 660 root radio

	socket rild-debug stream 660 radio system

	user root

	group radio cache inet misc audio sdcard_rw log

dont know if that 'qcom_oncrpc' is important

another think I noticed was there is a init.qcom.rc in MHMP but none in ICS build. maybe that stuff is important, it has a lot og bluetooth and wifi stuff in there. I dont really know how the rc files work though. are they compiled? or are we supposed to amend for our phone?

Guest Racerboy

Guest Racerboy

Posted
Posted

Bluetooth works for me on the skate

and me on the racer

Guest t0mm13b

Guest t0mm13b

Posted
Posted

thats strange. I wonder why I wasnt getting a rild socket at all then. I compared the init.rc to a GB one and to the Hero ICS one and the rild stuff seems ok.

Comparing to MHMP there was one difference in the groups, MHMP:


service ril-daemon /system/bin/rild

	socket rild stream 660 root radio

	socket rild-debug stream 660 radio system

	user root

	group radio cache inet misc audio sdcard_rw qcom_oncrpc
ICS 

service ril-daemon /system/bin/rild

	class main

	socket rild stream 660 root radio

	socket rild-debug stream 660 radio system

	user root

	group radio cache inet misc audio sdcard_rw log

dont know if that 'qcom_oncrpc' is important

another think I noticed was there is a init.qcom.rc in MHMP but none in ICS build. maybe that stuff is important, it has a lot og bluetooth and wifi stuff in there. I dont really know how the rc files work though. are they compiled? or are we supposed to amend for our phone?

rc files are basically scripts to set up the android environment and its associated resources, such as bluetooth, telephony, wireless etc...

Might be worth a shot in adding qcom_oncrpc to the init.rc :)

Guest fp30

Guest fp30

Posted
Posted

rc files are basically scripts to set up the android environment and its associated resources, such as bluetooth, telephony, wireless etc...

Might be worth a shot in adding qcom_oncrpc to the init.rc :)

ok i'll give it a go. i'll try adding the other init.qcom.rc file too. does alpha3 have the patched ril.java file it in?

Guest balalev

Guest balalev

Posted
Posted (edited)

the new version can make phone calls, surf the Web?(alpha3)

Edited by balalev
Guest hugobosslives

Guest hugobosslives

Posted
Posted

the new version can make phone calls, surf the Web?(alpha3)

nope :D

please wait until it says it's fully functional and working before flashing.

and obviously asking the above does not speed anything up......

you will be informed when it works cool.gif

Guest Ippe H

Guest Ippe H

Posted
Posted

I just made quick merge to init.blade.rc


# Setup bluetooth

chmod 0660 /proc/bluetooth/sleep/proto

chown bluetooth bluetooth /dev/ttyHS0 <-- missing

chmod 0660 /dev/ttyHS0 <-- missing

chown bluetooth bluetooth /sys/devices/platform/msm_serial_hs.0/clock


# Permission for ril <-- missing

   chown radio system /dev/pm_monitor <-- missing

   chmod 0770 /ddev/pm_monitor <-- missing 

   chown radio system /dev/oncrpc/30000016:9c95bb4d <-- missing 

   chown radio system /dev/oncrpc/30000000:dd7fe79a <-- missing

   chown radio system /dev/oncrpc/30000019:821a1945 <-- missing

   chown radio system /dev/oncrpc/3000003c:beb78360 <-- missing

   chown radio system /dev/oncrpc/30000003:d03123cc <-- missing

   chown radio system /dev/oncrpc/3000000e:00060000 <-- missing

   chown radio system /dev/oncrpc/30000012:00010000 <-- missing



# For qmuxd socket

	mkdir /data/radio 0770 radio radio

	chown radio radio 0770 /data/radio


	chown radio system /dev/pm_monitor <-- missing


# Sensors

	chmod 0777 /dev/akm8973_aot <-- missing

	chmod 0777 /dev/akm8973_dev <-- missing

Guest t0mm13b

Guest t0mm13b

Posted
Posted (edited)

I just made quick merge to init.blade.rc


# Setup bluetooth

chmod 0660 /proc/bluetooth/sleep/proto

chown bluetooth bluetooth /dev/ttyHS0 <-- missing

chmod 0660 /dev/ttyHS0 <-- missing

chown bluetooth bluetooth /sys/devices/platform/msm_serial_hs.0/clock


# Permission for ril <-- missing

   chown radio system /dev/pm_monitor <-- missing

   chmod 0770 /ddev/pm_monitor <-- missing 

   chown radio system /dev/oncrpc/30000016:9c95bb4d <-- missing 

   chown radio system /dev/oncrpc/30000000:dd7fe79a <-- missing

   chown radio system /dev/oncrpc/30000019:821a1945 <-- missing

   chown radio system /dev/oncrpc/3000003c:beb78360 <-- missing

   chown radio system /dev/oncrpc/30000003:d03123cc <-- missing

   chown radio system /dev/oncrpc/3000000e:00060000 <-- missing

   chown radio system /dev/oncrpc/30000012:00010000 <-- missing



# For qmuxd socket

	mkdir /data/radio 0770 radio radio

	chown radio radio 0770 /data/radio


	chown radio system /dev/pm_monitor <-- missing


# Sensors

	chmod 0777 /dev/akm8973_aot <-- missing

	chmod 0777 /dev/akm8973_dev <-- missing

Telephony is no go :lol

BUT

Bluetooth works and is confirmed :D :D :lol:

Thank you Ippe H. :D +1 from me :)

Edited by t0mm13b
Guest Er_alonso

Guest Er_alonso

Posted
Posted

Hi, I'm new and i have a Blade with this OS. I have some questions and bugs that you could fix, I hope. The Screen, when I lock the power button didn't do anything and the screen power on 1 minute later more or less. Also the radio didn't work. I hope you fix it and I am your betatester for whatever you want.

Guest check bai

Guest check bai

Posted
Posted

thinks .

these rom still have many problem.

radio can't work .and the benchmark shows that GPU do not work.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept