[CM9] Cyanogenmod 9 for LiquidA1/LiquidE

[Guest Auxx]

Darei, read a few pages back with my FAQ.

[Guest siggey]

Here is fix for camera preview from n1 devs (you need to flash it via CWM, unsigned). Its works for us too.

thank you

[Guest phoenixita]

i m not asking for an eta...but ca we know the progresses you have made on devoloping this rom?

Thank you in advance

[Guest Ma7moud]

i m not asking for an eta...but ca we know the progresses you have made on devoloping this rom?

Thank you in advance

+1 to that

i'm sure everyone would like to know what kind of progress was made since the release

[Guest Ellenico]

+1 B)

[Guest ccorasaaa]

+1 !!!

[Guest Willem van Oort]

just downloaded the new Temple Run game, the swipe doesn't seem to work flawlessly... someone any idea why this doesn't work correct for this rom? (or just me)

[Guest Sn0w0nS]

Hi,

I am trying to restore my acer liquid e to the official 2.1 Because I want to reinstall Malez recovery.

I downloaded on the acer support site acer liquid tool for 2.1 but it says that my acer has to be gen1.

So i than tried to use the acer liquid tool for 2.2 and than it says:

"Error! You are using an Acer Liquid phone with 256 MB of ram. This upgrade is only compatible with Acer Liquid e phones with 512 MB of ram."

I dont understand I am sure I have an Acer Liquid E, it says so on the box.

The only reason why I am trying this is because i have now the CWM Recovery from when I tried ICS, but I've put back Liquid next 9.2 on my phone. Now I want to put AuraxTSense rom and I can't put it with the CWM recovery,

so I need to put malez back but it doesn't work.

Can someone help me?

Thanks in advance.

Luca

Apologize for my bad english.

[Guest kakasai]

Here is fix for camera preview from n1 devs (you need to flash it via CWM, unsigned). Its works for us too.

thank you~

[Guest kakasai]

just downloaded the new Temple Run game, the swipe doesn't seem to work flawlessly... someone any idea why this doesn't work correct for this rom? (or just me)

me too..

[Guest josh Coghlan]

Hey , For Some Odd Reason My WI-Fi Is Now Out and My Mobile Network Will Not Connect Phone Frezzes up and Touch Screen Is Not working, Factory Rest And works for about 2 - 4 hours then dosnt want to work anymore , flashed back to 2.2 and then reflashed and still kinda buggy ... any ideas ??

[Guest LcD59c]

awesome camera is working now :D

[Guest josh Coghlan]

Starting recovery on Fri Mar 30 01:01:31 2012

framebuffer: fd 4 (480 x 800)

CWM-based Recovery v5.5.0.4

recovery filesystem table

=========================

0 /tmp ramdisk (null) (null) 0

1 /boot mtd boot (null) 0

2 /cache yaffs2 cache (null) 0

3 /data yaffs2 userdata (null) 0

4 /misc mtd misc (null) 0

5 /recovery mtd recovery (null) 0

6 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/mmcblk0 0

7 /system yaffs2 system (null) 0

8 /sd-ext ext2 /dev/block/mmcblk0p2 (null) 0

W:Unable to get recovery.fstab info for /datadata during fstab generation!

W:Unable to get recovery.fstab info for /emmc during fstab generation!

I:Completed outputting fstab.

I:Processing arguments.

I:Got arguments from boot message

mtd: successfully wrote block at 0

I:Set boot command "boot-recovery"

I:Checking arguments.

I:device_recovery_start()

Command: "recovery" "--update_package=SDCARD:update.zip"

ro.secure=0

ro.allow.mock.location=1

ro.debuggable=1

persist.sys.usb.config=mtp,adb

ro.build.id=ITL41F

ro.build.display.id=IML74K

ro.build.version.incremental=eng.pashtet.20120303.181359

ro.build.version.sdk=15

ro.build.version.codename=REL

ro.build.version.release=4.0.3

ro.build.date=Сбт Мар 3 18:14:12 MSK 2012

ro.build.date.utc=0

ro.build.type=userdebug

ro.build.user=pashtet

ro.build.host=pashtet-desktop

ro.build.tags=test-keys

ro.product.model=A1

ro.product.brand=acer

ro.product.name=liquid

ro.product.device=liquid

ro.product.board=salsa

ro.product.cpu.abi=armeabi-v7a

ro.product.cpu.abi2=armeabi

ro.product.manufacturer=Acer

ro.product.locale.language=en

ro.wifi.channels=

ro.board.platform=qsd8k

ro.build.product=liquid

ro.build.description=yakju-user 4.0.1 ITL41F 228551 release-keys

ro.build.fingerprint=google/yakju/maguro:4.0.1/ITL41F/228551:user/release-keys

ro.build.characteristics=default

ro.cm.device=liquid

mobiledata.interfaces=rmnet0

ro.media.dec.jpeg.memcap=20000000

persist.sys.use_dithering=1

persist.sys.purgeable_assets=0

ro.telephony.ril.v3=skipbrokendatacall,signalstrength

persist.sys.strictmode.disable=true

debug.composition.type=mdp

dalvik.vm.heapstartsize=5m

dalvik.vm.heapsize=32m

keyguard.no_require_sim=true

ro.com.android.dateformat=MM-dd-yyyy

ro.config.ringtone=Ring_Synth_04.ogg

ro.config.notification_sound=pixiedust.ogg

ro.config.alarm_alert=Alarm_Classic.ogg

ro.com.google.locationfeatures=1

ro.com.android.dataroaming=false

ro.sf.lcd_density=240

rild.libpath=/system/lib/libril-acer-1.so

rild.libargs=-d/dev/smd0

ro.ril.hsxpa=1

ro.ril.gprsclass=10

ro.setupwizard.enable_bypass=1

dalvik.vm.lockprof.threshold=500

dalvik.vm.dexopt-flags=m=y

dalvik.vm.execution-mode=int:jit

dalvik.vm.checkjni=false

debug.sf.hw=1

ro.compcache.default=0

ro.media.dec.aud.wma.enabled=1

ro.media.dec.vid.wmv.enabled=1

hwui.render_dirty_regions=false

hwui.disable_vsync=true

persist.ro.ril.sms_sync_sending=1

hw.acer.psensor_calib_max_base=32717

hw.acer.psensor_calib_min_base=32716

hw.acer.psensor_thres=500

hw.acer.psensor_mode=1

ro.hw_version=6

windowsmgr.max_events_per_sec=150

ro.telephony.default_network=3

wifi.interface=eth0

wifi.supplicant_scan_interval=180

ro.opengles.version=131072

dalvik.vm.dexopt-data-only=1

ro.rommanager.developerid=cyanogenmod

ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html

ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html

ro.com.google.clientidbase=android-google

ro.com.android.wifi-watchlist=GoogleGuest

ro.setupwizard.enterprise_mode=1

ro.cm.version=9.0.0-RC0Liquid-WAG-Team-liquid-KANG

ro.modversion=9.0.0-RC0Liquid-WAG-Team-liquid-KANG

net.bt.name=Android

net.change=net.bt.name

dalvik.vm.stack-trace-file=/data/anr/traces.txt

ro.factorytest=0

ro.serialno=recovery

ro.bootmode=unknown

ro.baseband=A1-05.01.07

ro.carrier=unknown

ro.bootloader=1.10.00

ro.hardware=salsa

ro.revision=0

ro.emmc=0

init.svc.recovery=running

service.adb.root=1

init.svc.adbd=running

Finding update package...

I:Update location: SDCARD:update.zip

E:unknown volume for path [sDCARD:update.zip]

E:Can't mount SDCARD:update.zip

Installation aborted.

mtd: successfully wrote block at 0

I:Set boot command ""

mtd: successfully wrote block at 0

I:Set boot command ""

[Guest philippe75017]

Hi,

I am trying to restore my acer liquid e to the official 2.1 Because I want to reinstall Malez recovery.

I downloaded on the acer support site acer liquid tool for 2.1 but it says that my acer has to be gen1.

So i than tried to use the acer liquid tool for 2.2 and than it says:

"Error! You are using an Acer Liquid phone with 256 MB of ram. This upgrade is only compatible with Acer Liquid e phones with 512 MB of ram."

I dont understand I am sure I have an Acer Liquid E, it says so on the box.

hi, did you try to use the "acer download tool" instead of official liquid tool ?

it is more flexible.

still, depending on your device (A1 256 mb or liquid E) the 2.2 bin would not be the same

[Guest Sn0w0nS]

hi, did you try to use the "acer download tool" instead of official liquid tool ?

it is more flexible.

still, depending on your device (A1 256 mb or liquid E) the 2.2 bin would not be the same

I tried, but i do not understand how to use it.

I did this before you know but for some reason I forgot how to do these things, I feel so stupid.

Edit: Ok I think I now found out how it works but I don't know what bin file I have to download.

Can you help me with that?

Thanks :-)

Edited March 30, 2012 by Sn0w0nS

[Guest Ma7moud]

I tried, but i do not understand how to use it.

I did this before you know but for some reason I forgot how to do these things, I feel so stupid.

Edit: Ok I think I now found out how it works but I don't know what bin file I have to download.

Can you help me with that?

Thanks :-)

4.002.14.EMEA.GEN1

don't forget to download the one for your phone

256MB A1 or 512MB Liquid E

[Guest Sn0w0nS]

4.002.14.EMEA.GEN1

don't forget to download the one for your phone

256MB A1 or 512MB Liquid E

Hi,

It doesn't work perhaps I use the acer download tool wrong , but it doesn't work and I don't know how to explain what I am doing.

Can you or someone else just explain me step by step how to proceed.

What I have now is an acer liquid e with Liquid next 9.2 on it , and i have the cwm recovery on it.

But I want to put back Malez recovery because there are some roms that I am unable to flash with cwm recovery.

Thank you in advance.

[Guest elixir.amrit]

When is the new version coming out?

[Guest Ma7moud]

Hi,

It doesn't work perhaps I use the acer download tool wrong , but it doesn't work and I don't know how to explain what I am doing.

Can you or someone else just explain me step by step how to proceed.

What I have now is an acer liquid e with Liquid next 9.2 on it , and i have the cwm recovery on it.

But I want to put back Malez recovery because there are some roms that I am unable to flash with cwm recovery.

Thank you in advance.

if you have the Malez recovery installer then just use it, if you don't have it you can get it from here :

http://code.google.com/p/acer-liquid-malez-recovery/downloads/list

and the instructions here:

http://code.google.com/p/acer-liquid-malez-recovery/wiki/howToInstall

[Guest Sn0w0nS]

if you have the Malez recovery installer then just use it, if you don't have it you can get it from here :

http://code.google.c.../downloads/list

and the instructions here:

http://code.google.c...ki/howToInstall

Thats the problem I already did that but it doesn't work.

Maybe something is wrong with my phone.

Edit: This is what I get when I try to install Malez http://d.pr/jTxJ This is from a virtual xp machine running on my mac but I've already tried it on the pc from my girlfriend and the same happens.

I have usb debugging on.

Edited March 31, 2012 by Sn0w0nS

[Guest siggey]

please guys this is cm9 thread, don't be OT. And read the ultimate liquid thread, everything was already explained.

[Guest Sn0w0nS]

please guys this is cm9 thread, don't be OT. And read the ultimate liquid thread, everything was already explained.

I am asking for help here because the problem I have is since I installed cm9.

Edited March 31, 2012 by Sn0w0nS

[Guest]

Does the acer download tool recognise the liquid in bootloader with new recocery? ( to flash official bins without malez or adb)

[Guest Ma7moud]

Does the acer download tool recognise the liquid in bootloader with new recocery? ( to flash official bins without malez or adb)

i think it will

[Guest]

i think it will

Can you try? I ' m a noob I don't now how to use adb...