Guest titus95 Posted October 14, 2012 Report Posted October 14, 2012 most probably this will solve bluetooth issue temporarily, enable the bluetooth an then reboot the device with bluetooth enabled, i had a problem today and did this and it worked again.(try this with wifi too) Yes I find this solution also, but the reboot is automatically for Wifi and sometime indefinitely.
Guest Kilvador Posted October 15, 2012 Report Posted October 15, 2012 Hello to all! Thanks for the great job! I've installed today CM9, everything is fine for my Acer Liquid 256, but sms-led is not flashing. All notifications are shown like "Missed call". Instructions from 2 post are done. Could you help me please?
Guest Diljeet Posted October 15, 2012 Report Posted October 15, 2012 (edited) Yes LEDs are not fixed yet they will be fixed in next release. I think LEDs are not such a important part, many people complain for them, ok LEDs are helpful but not a really necessary part, most phone don't have LED notifications like ours. They will be fixed soon what is the rush, till then enjoy so many other features of the rom. This issue has been reported many times, so developers will consider this in the next release. ---- Alboz83 i will also try setting messaging app Edited October 15, 2012 by Diljeet
Guest alboz83 Posted October 15, 2012 Report Posted October 15, 2012 Hello to all! Thanks for the great job! I've installed today CM9, everything is fine for my Acer Liquid 256, but sms-led is not flashing. All notifications are shown like "Missed call". Instructions from 2 post are done. Could you help me please? You must set message application with white color. Click + in led notifications menu and select Messaging.
Guest Kilvador Posted October 15, 2012 Report Posted October 15, 2012 You must set message application with white color. Click + in led notifications menu and select Messaging. It's now WORKING! Really Thank You! Yes LEDs are not fixed yet they will be fixed in next release. I think LEDs are not such a important part, many people complain for them, ok LEDs are helpful but not a really necessary part, most phone don't have LED notifications like ours. They will be fixed soon what is the rush, till then enjoy so many other features of the rom. This issue has been reported many times, so developers will consider this in the next release. ---- Alboz83 i will also try setting messaging app I understand, thank you for explanation. In other ways, I've used CM9 a short time, but it's really hard for this device to carry it on ((( It means, that CM9 is really slow with bottom limit of 128MHz on CPU. Only when I've setted it up to 576 bottom limit and 883 top limit ICS speeds up. And, I noticed battery drain: around 12% in 1 and a half of an hour.
Guest sanniep Posted October 15, 2012 Report Posted October 15, 2012 This rom is really fast! My only problem is that i have way too much reboots (the ones in the middle of phonecalls are the most annoying :P ) I don't know if the devs experience this also. If not, is there a way i can log them to find the cause of these reboots?
Guest Diljeet Posted October 15, 2012 Report Posted October 15, 2012 It's now WORKING! Really Thank You! I understand, thank you for explanation. In other ways, I've used CM9 a short time, but it's really hard for this device to carry it on ((( It means, that CM9 is really slow with bottom limit of 128MHz on CPU. Only when I've setted it up to 576 bottom limit and 883 top limit ICS speeds up. And, I noticed battery drain: around 12% in 1 and a half of an hour. Thanks for reporting about the LED, its finally working(Thanks Alboz too). Well what i meant before was that, that CM9 is still under development phase(CM9 RC1 is the first usable rom for Acer Liquid A1 from all the releases before), so its beginning and the rom will be more user friendly in later releases. Although i never experienced any big lags so far i didn't overclock(just set frequencies on boot and set governor smartassv2, you can also set max frequency to 920MHz or 960 MHz they are stable). Battery drain in sleep mode was normal, less than or equal to 1 percent per hour(check cpu spy if deep sleep works or not). Did you freeze text to speech applications? also do you end the google services manually after every boot? (These two methods got me away from lags and reboots)
Guest Meos Posted October 15, 2012 Report Posted October 15, 2012 (edited) Notification LEDS fix: Go to settings->Display->Pulse notification light Check Pulse notification light and Use custom values options: Default : white color (default) Missed call: choose a color different from white (Green for example) Voice mail: choose a color different from white and different from the one you set above (Red for example). And Add SMS/MMS application with default (White) color It works for me. Edited October 15, 2012 by Meos
Guest azuss Posted October 15, 2012 Report Posted October 15, 2012 On RC1, when I open facebook, phone triple reboot while loging in. Also a2sd doesn't work (when I put it to ON phone reboot, then I check it again and it's still OFF)
Guest azuss Posted October 15, 2012 Report Posted October 15, 2012 Patch seems to fix the facebook issue.
Guest Muhaimin Posted October 15, 2012 Report Posted October 15, 2012 let me say something to all the users who has any kind of issues from the beginning, i tested this from before it got released officially here in the forums, from then till now no issues at all for me now.... i see this rom super fast, usable, stable.... only one problem i has is camera zoom and low fps in camcorder.... but still manageable... other than this no issues at all for me, so i think all the issues that comes are causing because of installation problem from your side.
Guest titus95 Posted October 15, 2012 Report Posted October 15, 2012 (edited) Yes, of course, some people have the same problems, they have to make the same installation .... I agree that this is a great ROM. BUT there's some very random. I had no BT but the wifi was OK, I redid the installation now BT is OK but the wifi causes reboot. In two days I had to redo the installation 5 times. swip factory, flash RC1, flash patch, format ext, etc.... what can I do more? a2sd works fine but not the swap (I have the correct partition on the sd). Except perhaps go through a stock rom before a full reflash. I do not think Thepasto done all this work for just one configuration (1 person) for whom everything goes well so we have something else going on. When something "stuck" it's good to know. In fact, before the patch the wifi did not cause reboot, coincidence? Edited October 15, 2012 by titus95
Guest renzs Posted October 16, 2012 Report Posted October 16, 2012 let me say something to all the users who has any kind of issues from the beginning, i tested this from before it got released officially here in the forums, ................ so i think all the issues that comes are causing because of installation problem from your side. Hi, please share the Acer Bin you have used before this installation. For me it's 4.002.14.emea.gen1. But I'm also not sure if this still has any connection to the current situation. Previously when going from froyo to gb, this was important.
Guest Kilvador Posted October 16, 2012 Report Posted October 16, 2012 (edited) Thanks for reporting about the LED, its finally working(Thanks Alboz too). Well what i meant before was that, that CM9 is still under development phase(CM9 RC1 is the first usable rom for Acer Liquid A1 from all the releases before), so its beginning and the rom will be more user friendly in later releases. Although i never experienced any big lags so far i didn't overclock(just set frequencies on boot and set governor smartassv2, you can also set max frequency to 920MHz or 960 MHz they are stable). Battery drain in sleep mode was normal, less than or equal to 1 percent per hour(check cpu spy if deep sleep works or not). Did you freeze text to speech applications? also do you end the google services manually after every boot? (These two methods got me away from lags and reboots) I have stopped apps that you mentioned above. I need to wait some time for decide what's happened. Other way, I installed this rom on CM7.2 from thepasto. May be I need to install it on 4.002.14? Update: Here is my battery drain... 3 h. 50m. and 33% of battery (( Internet and wifi is stoped, gps is stoped, Google aps are unloaded from memory. Edited October 16, 2012 by Kilvador
Guest Muhaimin Posted October 16, 2012 Report Posted October 16, 2012 Honestly i dont know whats going on, this is what i did, installed CWM Recovery, factory reset, wiped all, partitioned sd card with 512 mb ext and 128mb swap. flashed the rc1 with toggle signature.... rebooted for 4 to 5 times, installed the patch, rebooted 2 to 3 times, installed a2sd, disabled some unused apps, enabled 2d hardware rendering for apps.... then started installing apps from play store.... later on for more speed i removed trebuchet and installed holo launcher..... now i have the below mentioned apps installed in my phone:- androzip angrybirds seasons ADVERTISING SPAM barcode scanner blood and glory call blocker camera ics+ camera mx chainfire3d chrome color eye dslr controller extreme racing file manager jet car stunts lite jumi cam gta 3 maps maxthon browser mobile voip nimbuzz skype vignette opera mobile parking experts 3d titanium backup cam scanner ......... yesterday night i tried overclocking to 921mhz, and am still on it, without single freeze or reboot or much battery consumption..... am happy with it now..... Really appreciate for the great work thepasto :D i hope its not the problem of the rom which you all are experiencing, i think its some error or installation mistake...... and bt and wifi and gps, all are working for me.... till now i havent faced any issue reported here.... the patch is also working for me, its fast wakeup now... and not to forget, i also disabled lock animation....
Guest Muhaimin Posted October 16, 2012 Report Posted October 16, 2012 Hi, please share the Acer Bin you have used before this installation. For me it's 4.002.14.emea.gen1. But I'm also not sure if this still has any connection to the current situation. Previously when going from froyo to gb, this was important. no need to go back to the stock rom or anything, just reflash with all wiped and repartition
Guest Muhaimin Posted October 16, 2012 Report Posted October 16, 2012 my battery drain and some screen shot
Guest Kilvador Posted October 16, 2012 Report Posted October 16, 2012 my battery drain and some screen shot Looks like the same as mine. Show me, please, you performance settings.
Guest alboz83 Posted October 16, 2012 Report Posted October 16, 2012 Honestly i dont know whats going on, this is what i did, installed CWM Recovery, factory reset, wiped all, partitioned sd card with 512 mb ext and 128mb swap. flashed the rc1 with toggle signature.... rebooted for 4 to 5 times, installed the patch, rebooted 2 to 3 times, installed a2sd, disabled some unused apps, enabled 2d hardware rendering for apps.... then started installing apps from play store.... later on for more speed i removed trebuchet and installed holo launcher..... now i have the below mentioned apps installed in my phone:- androzip angrybirds seasons ADVERTISING SPAM barcode scanner blood and glory call blocker camera ics+ camera mx chainfire3d chrome color eye dslr controller extreme racing file manager jet car stunts lite jumi cam gta 3 maps maxthon browser mobile voip nimbuzz skype vignette opera mobile parking experts 3d titanium backup cam scanner ......... yesterday night i tried overclocking to 921mhz, and am still on it, without single freeze or reboot or much battery consumption..... am happy with it now..... Really appreciate for the great work thepasto :D i hope its not the problem of the rom which you all are experiencing, i think its some error or installation mistake...... and bt and wifi and gps, all are working for me.... till now i havent faced any issue reported here.... the patch is also working for me, its fast wakeup now... and not to forget, i also disabled lock animation.... For now, apart problem of flickering, the rom is fast enough, and really stable. The only difference with your configurations is that i use TWRP in place of CWM, 1024 mb ext and 256mb swap, i flashed CM9 RC1 without toggle signature. I use now Nova Launcher and seems fast, only the open applications is a bit slow (about 5 seconds). Might be useful to know the configurations of each of us (which launcher, performance settings, developer options, etc..)
Guest Ellenico Posted October 16, 2012 Report Posted October 16, 2012 (edited) My battery has 3-4 months. It's a Cameron Sino Model with 3.7V-1500mAh-5.5Wh Lithium-ion. Ever 2G/3G on Sorry for my bad english. Bug: fix BT don't work (notification status bar)....also Wifi (many blocks). Liquid a1 and microsd class 10. Configuration: a-Launcher Trebuchet Home -transition effects standard -scroll background off Drawer -transition effects standard b-Developer options -force gpu rendering on c-Performance Processor -Governor Cpu "Performance" (it's very important) -freq min cpu 128 -freq max cpu 921 (for me max stability) Memory management -all off Surface dithering on Transparency 16bit off Now liquid a1 is fast and stable. Thx all Developers. PS: now JB on liquid a1 LOL Edited October 16, 2012 by Ellenico
Guest Flikzor Posted October 16, 2012 Report Posted October 16, 2012 Hi I have kind of a stupid question.. but when I wipe my liquid with the ROM on it doesn't it delete the ROM file? Or is this not a problem? Otherwise I just go and flash the rom :)
Guest Muhaimin Posted October 16, 2012 Report Posted October 16, 2012 Hi I have kind of a stupid question.. but when I wipe my liquid with the ROM on it doesn't it delete the ROM file? Or is this not a problem? Otherwise I just go and flash the rom :) what you meant to ask? didnt understood..
Guest DesertF0x Posted October 16, 2012 Report Posted October 16, 2012 but when I wipe my liquid with the ROM on it doesn't it delete the ROM file? Do you mean the rom file on the SD-Card? That is normal as the SD-Card is not wiped.
Guest Flikzor Posted October 16, 2012 Report Posted October 16, 2012 Do you mean the rom file on the SD-Card? That is normal as the SD-Card is not wiped. Okay thnx!
Guest Flikzor Posted October 16, 2012 Report Posted October 16, 2012 I have a problem.. I'm trying to flash the unoficial salsa.zip but I get this error: assert failed: getprop("ro.product.device") == "salsa" || getpropt(ro.bE:unknown command [uild.product")] E:Error in /sdcard/cm-9-20121003-UNOFICIAL-salsa.zip (status 7) Installation aborted. Umount FS in main menu and retry. I did that 3 times already and it won't work.. What should I do?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now