Help! I'm new and I can't do...

[Guest wrtease]

yes .okay i flashed a rom thats not for this model on it and bricked the mobile. i was on b934.you were on b926 yes.then now its stuck yes.well its the same process i was in.so i pulled out the battery and put the battery back in and holded down the volume key and powered on the mobile.it stuck at the logo.then i plugged in the usb cable and i ran the clockworkmod stuff.then it would say waiting on device.i then unpluged the usb cable and pluged in the usb cable still holding the volume down and it found the device and clockwork was back on.also if it still wont work pull the battery and keep the cable plugged in and insert the battery it should work while waiting on device.clockwork should now be on .hope this helps as it did for me and a couple of others.good luck .

[Guest bryfly]

yes .okay i flashed a rom thats not for this model on it and bricked the mobile. i was on b934.you were on b926 yes.then now its stuck yes.well its the same process i was in.so i pulled out the battery and put the battery back in and holded down the volume key and powered on the mobile.it stuck at the logo.then i plugged in the usb cable and i ran the clockworkmod stuff.then it would say waiting on device.i then unpluged the usb cable and pluged in the usb cable still holding the volume down and it found the device and clockwork was back on.also if it still wont work pull the battery and keep the cable plugged in and insert the battery it should work while waiting on device.clockwork should now be on .hope this helps as it did for me and a couple of others.good luck .

cheers .....ill give that a go, then it might fly out the window.....lol

[Guest wrtease]

i cant tell you the rom i tried top secret?

[Guest bryfly]

i cant tell you the rom i tried top secret?

Tried what you suggested, no go sorry to say, phone works with B926 but diff model shown, u8818v100r001c17B926 , but seems to be a version that will not let me updateand no google, even gapps will not install says "signature verification failed" think i need to uninstall root, clockwork etc, as i said green man has red triangle with black exclamation which i guess means something is wrong..........thanks for trying to help

[Guest wrtease]

well looks like you can root it or unroot it .go to this web page and try this out www.unlockroot.com

very handy to use ,it might help as nothing else does.good luck.

[Guest bryfly]

well looks like you can root it or unroot it .go to this web page and try this out www.unlockroot.com

very handy to use ,it might help as nothing else does.good luck.

Great thanks, tried that and all fixed......cheers

[Guest b4da55]

well looks like you can root it or unroot it .go to this web page and try this out www.unlockroot.com

very handy to use ,it might help as nothing else does.good luck.

If this works than maybe start a new thread. Great work finding this

[Guest wrtease]

yes its a good find .really good.

[Guest wrtease]

bryfly

what did it do .just asking .how did it solve your issues.

[Guest bryfly]

bryfly

what did it do .just asking .how did it solve your issues.

Now there is a question.lol.....as i said did have it working fine, then somehow installed a rom which was in english but chinese based, no google etc. Then i tried to use the method on page one of this thread, but it would not let me install anything, not even Gapps, no matter how many times i rooted and installed cwm.

late last night i noticed that with button up and switch on it was not entering CWM, but was going to, Andriod system recovery <3e>.....Andriod system utility. I downloaded what you suggested and ran that, then went to install CWM on page 1 and it went fine from there on...........hope that helps, any more questions ill try to answer, but bit of a novice at this..... cheers

[Guest wrtease]

well i see this as a good root program for others having problems with any rom.

[Guest Hoggonator]

Help (please)

Thought I would have a go at loading bootloader and clockwork mod as per the instructions in the pinned thread '

Explained Like Your 5: Install custom ROMs from scratch

'

Remove the battery, wait 10 seconds and then reinsert it. Make sure you do this or the following steps will not work

Hold the Volume Down and Power on button together for 15 seconds. Your phone should start and freeze on the splash screen

I installed bootloader, then pulled the battery as per above and switched on but all I get is a flashing Hauwei boot screen - not a constant frozen one and the Clockwork-g300 batch file just sits in the command window stating that it is "waiting for device"

This is a stock 892 phone that has been rooted and that is it.

[Guest wrtease]

pull out usb and hold volume down and plug back in that should do it.

[Guest Hoggonator]

Thanks bit I still just have a flashing on and off Huawei logo :(

[Guest wrtease]

i can say is you need to root it again .or did you install any thing for ics?

[Guest Hoggonator]

Hi, but how can I root it again if it will not turn on? I get the flashing screen if I turn it on normally or if I hold the power and volume down button.

The phone was on stock GB 892 and rooted.

I performed and IMEI backup

I ran the bootloader-g300 batch file

I disconnected from the computer

I pulled the battery and waited about a minute

I put the battery back in and switched on via power and vol down

I received the flashing splash screen

I scratched my head, but followed the instructions, reconnected via USB then ran the clockworkmod batch file

I waited....

I tried again

I waited....

I posted

I pulled the usb and reinserted with power down

I waited

I thought "bugger - I think I have probably borked my phone..."

Edited September 10, 2012 by Hoggonator

[Guest wrtease]

so you were you on gb and still on gb or moving to ics .i can help with a little help to

[Guest Hoggonator]

I was on stock 892 GB on a phone that was only rooted. Nothing else.

I ran bootloader - that seemed to go fine, I got to the point where it said press a key to continue.

Then it all went wrong as per above.

I was going to installed Clockwork mod and move to the NZ rom as I was bored with waiting for the UK ICS update. However I did not get past to the point of installing clockwork mod.

Does that help? Sorry if I am not being clear here. The main issue seems to be I cannot get past the flashing bootscreen that seems to imply to me that I have borked the booting process.

[Guest wrtease]

when plugged in to usb does your pc pick it up and also did you tick usb debugging and unknown devices before this.

[Guest Hoggonator]

PC does not pick it up - it was before I started this as I moved the IMEI back up to the PC from the phone.

USB debugging was ticked as that is in the instructions.

I thing unknown devices was, but cannot guarantee that. That is not in the instructions.

[Guest wrtease]

okay will continue on the other thread for others to see .

[Guest Tony5101]

Hi Guys,

This is the first time that I've tried to flash a ROM and I'm stuck.

I've managed to follow the instructions from this thread

http://www.modaco.com/topic/355583-guide-how-to-install-and-root-ics-403-on-the-g300/

and am at the stage of trying to download and install CWM.

Unless I'm totally missing something, I can't seem to download the files that are referenced in the first page of this thread (section 3)

The install seems to have gone fine so far, except I can't install the Google Apps file - it keeps erroring.

Do I need to install CWM before the google apps?

I've been on hours so far, and am beginning to wish I hadn't started :( This is daughters new phone, and thought I was helping by trying to update her to the latest software. Feeling pretty miserable at the mo :(

Can anyone help?

Cheers,

T

[Guest wrtease]

yes you do .make shure you have usb debugging ticked in settings .go to development and tick it.

second go to settings and go to secuirity and tick unknown devices.

then do the root part

then do the clockwork stuff

hope this helps you.

[Guest Tony5101]

Just to update - managed to get CWM installed by following these instructions http://www.modaco.co...s-from-scratch/ - however, am now stuck at the point of trying to install the ROM.

The instructions are to go into CWM - which I have, and then select install zip from SD card. Everytime I select this option, the screen is left blank except for the 'tophat' in the centre which is now bold.

I must be doing something wrong, but just can't figure it out. - been trying to sort this out for the best part of 6 hours now :(

Edited September 10, 2012 by Tony5101

[Guest wrtease]

download clockwork again a load it again it could have been corupt.

Edited September 10, 2012 by wrtease