Guest Antoxa1998 Posted June 3, 2012 Report Share Posted June 3, 2012 (edited) Hi iPaq3870/Thank for Your good job! So, it won't turn off when pressing the power/hold button? And the screen stays powered on indefinitely? - power mangement screen arised , i pressed reboot and phone restarted to Droid without WinMo. Sometimes phone stacked at LockScreen, sometimes i can open LockScreen and can see Main screen without signal indication, sometimes signal indicator start showing a signal and then phone freez. Does it respond to other button presses? - no. Can you stay use the "voldown+back+menu" kill combo to reboot the phone? - no. And is this reproducible every time you do a reboot via kexec? - yes. Edited June 3, 2012 by Antoxa1998 Link to comment Share on other sites More sharing options...
Guest DimonAK Posted June 4, 2012 Report Share Posted June 4, 2012 It's not connected to the USB . method does not work from ipaq3870 Link to comment Share on other sites More sharing options...
Guest pepelito Posted June 4, 2012 Report Share Posted June 4, 2012 Arrgghhh... there's a bad show-stopper bug cropped up - video like youtube and camera preview don't work with the changed 32bpp.... and the release will be delayed until I am back. Try clean the data of talk, market, market updater, android framework, and the like. So, it won't turn off when pressing the power/hold button? And the screen stays powered on indefinitely? Does it respond to other button presses? Can you stay use the "voldown+back+menu" kill combo to reboot the phone? And is this reproducible every time you do a reboot via kexec? Perhaps in next version. Thanks Ipaq3870 it would be great to have iptables, droidwall and similar doesn't work without iptables. Link to comment Share on other sites More sharing options...
Guest mmkiss Posted June 6, 2012 Report Share Posted June 6, 2012 How to close the camera flash，No matter what the setting has been unable to close the flash Link to comment Share on other sites More sharing options...
Guest ddiaboo Posted June 7, 2012 Report Share Posted June 7, 2012 GPS dont work. Link to comment Share on other sites More sharing options...
Guest con73 Posted June 7, 2012 Report Share Posted June 7, 2012 GPS dont work. Gps.conf changed for me and the GPS works great at cm2. NTP_SERVER=0.europe.pool.ntp.org NTP_SERVER=1.europe.pool.ntp.org NTP_SERVER=2.europe.pool.ntp.org NTP_SERVER=3.europe.pool.ntp.org XTRA_SERVER_1=http://xtra2.gpsonextra.net/xtra.bin XTRA_SERVER_2=http://xtra1.gpsonextra.net/xtra.bin XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose DEBUG_LEVEL=0 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions ACCURACY_THRES=0 # Report supl ref location as position, 1=enable, 0=disable REPORT_POSITION_USE_SUPL_REFLOC=1 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following #SUPL_HOST=lbs.geo.t-mobile.com SUPL_HOST=supl.google.com SUPL_PORT=7276 SUPL_SECURE_PORT=7276 SUPL_NO_SECURE_PORT=3425 #SUPL_TLS_HOST=FQDN #SUPL_TLS_CERT=/system/etc/SuplRootCert # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 CURRENT_CARRIER=common DEFAULT_AGPS_ENABLE=TRUE DEFAULT_SSL_ENABLE=FALSE # TRUE for "User Plane", FALSE for "Control Plane" DEFAULT_USER_PLANE=TRUE ################################ # EXTRA SETTINGS ################################ # Wiper (wifi positioning), 1=enable, 0=disable ENABLE_WIPER=0 DEFAULT_AGPS_ENABLE=TRUE Link to comment Share on other sites More sharing options...
Guest siriarobe1 Posted June 7, 2012 Report Share Posted June 7, 2012 GPS dont work. While GPS does not work on me Everything else works fine!! Thanks. Link to comment Share on other sites More sharing options...
Guest ddiaboo Posted June 7, 2012 Report Share Posted June 7, 2012 Gps.conf changed for me and the GPS works great at cm2. NTP_SERVER=0.europe.pool.ntp.org NTP_SERVER=1.europe.pool.ntp.org NTP_SERVER=2.europe.pool.ntp.org NTP_SERVER=3.europe.pool.ntp.org XTRA_SERVER_1=http://xtra2.gpsonextra.net/xtra.bin XTRA_SERVER_2=http://xtra1.gpsonextra.net/xtra.bin XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose DEBUG_LEVEL=0 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions ACCURACY_THRES=0 # Report supl ref location as position, 1=enable, 0=disable REPORT_POSITION_USE_SUPL_REFLOC=1 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following #SUPL_HOST=lbs.geo.t-mobile.com SUPL_HOST=supl.google.com SUPL_PORT=7276 SUPL_SECURE_PORT=7276 SUPL_NO_SECURE_PORT=3425 #SUPL_TLS_HOST=FQDN #SUPL_TLS_CERT=/system/etc/SuplRootCert # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 CURRENT_CARRIER=common DEFAULT_AGPS_ENABLE=TRUE DEFAULT_SSL_ENABLE=FALSE # TRUE for "User Plane", FALSE for "Control Plane" DEFAULT_USER_PLANE=TRUE ################################ # EXTRA SETTINGS ################################ # Wiper (wifi positioning), 1=enable, 0=disable ENABLE_WIPER=0 DEFAULT_AGPS_ENABLE=TRUE But work with 4.0 patch ? Link to comment Share on other sites More sharing options...
Guest con73 Posted June 8, 2012 Report Share Posted June 8, 2012 But work with 4.0 patch ? Yes. GPS works on patch 4.0. Link to comment Share on other sites More sharing options...
Guest ddiaboo Posted June 8, 2012 Report Share Posted June 8, 2012 Yes. GPS works on patch 4.0. This definition it seemes only AGPS and not GPS by satellites, but i will try. Thanks. Link to comment Share on other sites More sharing options...
Guest con73 Posted June 8, 2012 Report Share Posted June 8, 2012 After downloading the data in the 'GPS Status' (market) captures the signal in a cold start in about 1-2 minutes in hot about 20-30 seconds. Link to comment Share on other sites More sharing options...
Guest nikkotsoi Posted June 9, 2012 Report Share Posted June 9, 2012 hi ipaq i am glad to tell you that after my new clean install with your modules put inside the ext4.tar.gz wi-fi and gps are now working !! :D Link to comment Share on other sites More sharing options...
Guest nikkotsoi Posted June 9, 2012 Report Share Posted June 9, 2012 and also i think before reinstall, the 24p effect is not obvious now the facebook are much better! Link to comment Share on other sites More sharing options...
Guest nikkotsoi Posted June 9, 2012 Report Share Posted June 9, 2012 however, i can capture the photo but it can't save just save a black file =[? Link to comment Share on other sites More sharing options...
Guest Pathwalker Posted June 10, 2012 Report Share Posted June 10, 2012 Hi! looks like i've missed too much arround here and honestly i don't understand everything in this topic, so can anyone give me a ditaiiled instruction to install cm2 with 667mhz-166mhz-160mb-24bpp??! what should i do exactly, and what's Kexec a.k.a exactly?? and how to add it! thank's :) Link to comment Share on other sites More sharing options...
Guest Kannan Ramaswamy Posted June 11, 2012 Report Share Posted June 11, 2012 Hi Ipaq, Are install instructions same as with updates posted for CMB2??? Regards Kannan Link to comment Share on other sites More sharing options...
Guest pepelito Posted June 11, 2012 Report Share Posted June 11, 2012 Hi all. I usually use wifi and I've found our beloved omnia2 a very high power consuming device, the higest in my "collection of devices" even I have other "wifi libertas" devices but they don't use so much battery. I tried to use iwconfig txpower to low the power used as I use in my other devices to 4dBM, but in this case the libertas driver doesn't accept any change,the default option is 13dBM. Ipaq3870, do you kown if this a proper device behaviour? is it a bug? It would be great to be able to modify the txpower scheme (i use a mifi device and of course 4dBm is more than enough) Thanks Link to comment Share on other sites More sharing options...
Guest musicman1982 Posted June 12, 2012 Report Share Posted June 12, 2012 Hi all! Reinstalled android from sracth. Deleted all old files, formatted the partition. Wifi and Phone OK now. Anyone got a working ADB with the new 4.0 kernel? I tried ipaq3870's suggestions (keep phone in sleep, then wake up, connect cable, and sleep, and wake up.. many times) but not work. I feel i discovered some bug: -if i press the endcall button(to wake up android) many times, and do not touch the lock, the phone will SOD. Not waking up anymore. Link to comment Share on other sites More sharing options...
Guest zappazz Posted June 17, 2012 Report Share Posted June 17, 2012 Gps.conf changed for me and the GPS works great at cm2. NTP_SERVER=0.europe.pool.ntp.org NTP_SERVER=1.europe.pool.ntp.org NTP_SERVER=2.europe.pool.ntp.org NTP_SERVER=3.europe.pool.ntp.org XTRA_SERVER_1=http://xtra2.gpsonextra.net/xtra.bin XTRA_SERVER_2=http://xtra1.gpsonextra.net/xtra.bin XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose DEBUG_LEVEL=0 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions ACCURACY_THRES=0 # Report supl ref location as position, 1=enable, 0=disable REPORT_POSITION_USE_SUPL_REFLOC=1 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following #SUPL_HOST=lbs.geo.t-mobile.com SUPL_HOST=supl.google.com SUPL_PORT=7276 SUPL_SECURE_PORT=7276 SUPL_NO_SECURE_PORT=3425 #SUPL_TLS_HOST=FQDN #SUPL_TLS_CERT=/system/etc/SuplRootCert # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 CURRENT_CARRIER=common DEFAULT_AGPS_ENABLE=TRUE DEFAULT_SSL_ENABLE=FALSE # TRUE for "User Plane", FALSE for "Control Plane" DEFAULT_USER_PLANE=TRUE ################################ # EXTRA SETTINGS ################################ # Wiper (wifi positioning), 1=enable, 0=disable ENABLE_WIPER=0 DEFAULT_AGPS_ENABLE=TRUE GPS worked for me with the first Kernel patch (2.0 and 3.0), but with 4.0 i never got a fix. Looking at my gps.conf, i see it is exactly the copy of CM2, but it differs from yours, becouse the original is: SUPL_PORT=7275 SUPL_SECURE_PORT=7275 ENABLE_WIPER=1 DEFAULT_AGPS_ENABLE=TRUE QOS_ACCURACY=50 QOS_TIME_OUT_STANDALONE=60 QOS_TIME_OUT_agps=89 QosHorizontalThreshold=1000 QosVerticalThreshold=500 AssistMethodType=1 AgpsUse=1 AgpsMtConf=0 AgpsMtResponseType=1 AgpsServerType=1 AgpsServerIp=3232235555 CURRENT_CARRIER=common DEFAULT_USER_PLANE=TRUE REPORT_POSITION_USE_SUPL_REFLOC=1 Where did you get your gps.conf? Link to comment Share on other sites More sharing options...
Guest con73 Posted June 18, 2012 Report Share Posted June 18, 2012 Where did you get your gps.conf? How do I? The method of trial and error when browsing a google. Such gps.conf of gpsstatus (market) gives me a quick location of the GPS. In its original gps.conf of CM2 were the same problems, now I do not have them. Link to comment Share on other sites More sharing options...
Guest musicman1982 Posted June 20, 2012 Report Share Posted June 20, 2012 (edited) Hi Ipaq! First, i wanna say thank you for you work!! :) I am using 800mhz-133mhz-141mb-16bpp version. If i play with Angry birds, and then return to launcherpro, my desktop is flickered with some color pixels. (for exlampe: like pixel errors on lcd, on a black background i have many NOT black, colored pixels, but ONLY on homescreen!) I tried to go sleep, then return, it not solve the problem. I tried to change to ADW Launcher, restart Launcherpro, not work. By the way: angry birds space got white squares :( Edited June 20, 2012 by musicman1982 Link to comment Share on other sites More sharing options...
Guest Antoxa1998 Posted June 20, 2012 Report Share Posted June 20, 2012 I tested 800mhz-133mhz-141mb-16bpp version. And did not have any problem at all. Birds - without white squares ! This core more stable for me, only performance a little less then 667-166-160-24 :blink: Link to comment Share on other sites More sharing options...
Guest musicman1982 Posted June 21, 2012 Report Share Posted June 21, 2012 (edited) Antoxa! Not angry birds! angry birds SPACE! Edited June 21, 2012 by musicman1982 Link to comment Share on other sites More sharing options...
Guest Kannan Ramaswamy Posted June 24, 2012 Report Share Posted June 24, 2012 IPaq, i got it working. Alas, i thought the zip is another 140mb odd file at first. Then was pleasantly surprised to look at the .ko files which i could make out belong to the modules directory. Testing things with the various builds of yours and looks like a solid build of sorts except of a one time reboot. Regards Kannan Link to comment Share on other sites More sharing options...
Guest Pathwalker Posted June 28, 2012 Report Share Posted June 28, 2012 hi, is it possible to remove imei support from kernel? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now