[ROM][ZTE Skate] CyanogenMod 7.2.0 (STABLE) - Android 2.3.7 (31/10/12)

[Guest C3C0]

@donk165

You're welcome. :)

My daily is my paranoid android build. For now...

@mogamycool

No dolby and no bravia. Dolby is impossible and bravia: no real benefit imho. Not worth an effort really. But you could try integrating it yourself. Try searching xda. You may find something on this there.

Edited September 3, 2012 by C3C0

[Guest dibbles]

@donk165

You're welcome. :)

My daily is my paranoid android build. For now...

@mogamycool

No dolby and no bravia. Dolby is impossible and bravia: no real benefit imho. Not worth an effort really. But you could try integrating it yourself. Try searching xda. You may find something on this there.

I'll bite

What is paranoid about your build..?! :D

[Guest C3C0]

PA mafia knocking at my door while modifying their code :D

[Guest dibbles]

Knock Knock :D

[Guest C3C0]

rm -rf /

[Guest dibbles]

dd if=/dev/zero of=/dev/sda

[Guest omegavesko]

dd if=/dev/zero of=/dev/sda

Easily recoverable. Use /dev/random instead.

[Guest dibbles]

[Guest ilCosmico]

flash can be used in "torch mode" with this build?

[Guest C3C0]

No. Torch won't work on any Skare ROM. It is not supported at hardware level.

[Guest ilCosmico]

No. Torch won't work on any Skare ROM. It is not supported at hardware level.

ah ok... thank you

[Guest sifong]

Thank you for the new build.

Loud problem solved.

The only little problem is micro-cuts in the sound reproduction. The only player (at the moment) without this problem is deadbeef.

Someone else with this problem?

With update-cm-13112011-Skate-NIGHTLY.zip I didn't have this problem.

bye

[Guest C3C0]

Cuts can occur if your min CPU frequency is below default 245MHz.

[Guest aeolus1215]

@C3C0

I've try a lot of ways to solve the "black screen" bug, including the built-in proximity sensor calibration, 2 of your fixes, and various set of those value input manually,

but still can't fix it.

I got the same problem on your MokeeOS 1.10(0806) too. (also IceArmor III)

dunno what can i do now :(

Thx for your contribution of this ROM anyway :)

[Guest sifong]

Cuts can occur if your min CPU frequency is below default 245MHz.

Maybe, but with the other rom (update-cm-13112011-Skate-NIGHTLY.zip) I didn't have this problem, and the min cpu frequenci was the same, 122MHz.

At any rate, I'll try it with min 245MHz and your rom.

If you or anyone have an idea, please say me.

thanks.

[Guest Zverka]

I also have the same problem, it is possible that there is a hardware problem? Intersil ISL 29026 is a sensor, I think that this built into Blade

[Guest sifong]

Maybe, but with the other rom (update-cm-13112011-Skate-NIGHTLY.zip) I didn't have this problem, and the min cpu frequenci was the same, 122MHz.

At any rate, I'll try it with min 245MHz and your rom.

If you or anyone have an idea, please say me.

thanks.

ok, C3C0, your solution works but I found another better. Change de manager. I had "on demand". With "on demand" and 122MHz ko but "smartassv2" and 122MHz works ok.

Thanks and I hope this solution works ok for everybody with the same problem.

I don't try another manager but maybe exists another that works ok too.

[Guest dmitry_sensei]

Hi. Skatie and your CM have trouble. Visible area of screen "work down"to bottom. 1-2 mm.

cannot attach image in opera mini

Edited September 12, 2012 by dmitry_sensei

[Guest dmitry_sensei]

1. I install Skatie 1.1 en-tpt

2. Update It be cm72 20120831

Image in attach

Edited September 12, 2012 by dmitry_sensei

[Guest C3C0]

Can you provide boot.img of your original stock rom?

[Guest dmitry_sensei]

No. I dont use kitchen and etc. Main url to firmware http://212.46.17.195/Documents/DownLoad/GB_RU_P743TV1.0.0B01%20(SD%20card%20software).zip

support.zte.ru

Edited September 12, 2012 by dmitry_sensei

[Guest dmitry_sensei]

I can't help with boot.img because I use OpenBSD as desktop :)

Sorry

[Guest C3C0]

Thanks. I will take a look at it and get back to you later.

[Guest C3C0]

@dmitri

Compiled new kernel after inspecting the stock one.

This one is for SKatie (won't work on cyanogenmod). So you need to be on SKatie to test.

1) install SKatie (or restore from backup if you have it)

2) Flash this in clockworkmod: http://ceco.sk.eu.org/omc/GooMirror/Kernels/update-S2-boot-20120912.zip

Test touchscreen, light sensor and proximity sensor (I added support for new sensors: ONA3301 and ISL29026 -

this should eliminate problems with calibration some people are experiencing)

I tested it on my Skate and everything seems to be working fine on my hardware.

If everything works I will then make a new kernel for CyanogenMod, too. Or I will probably make a new release of CM7.2.

[Guest dmitry_sensei]

1.flash to skatie1.1

2. wipe data factory caches dalvik

3. install from zip on scared New s2

4. test. visibility is not changed. screen positions are still wrong