Bootloader Unlock for ICS 4.0.3 for the Ascend G300

[Guest Davidoff59]

https://docs.google.com/document/d/1MCf3DHJad3HiW0LSBIgvh8g6RcZzIrQX_5F-g8BSLF0/edit?pli=1

[Guest tillaz]

Also if you make a new MCR will I even need to have flashed b926 in the first place?

i would say yes, so your baseband gets updated

[Guest Hans Gruber]

i would say yes, so your baseband gets updated

Thanks, I thought that might be the case

[Guest FrankieADZ]

https://docs.google....SLF0/edit?pli=1

did u need to add the vendor file aswell

its tempting to try this ICS now, but I think I might wait until its officially released here. which i think i read its sometime this month. :)

Edited July 3, 2012 by FrankieADZ

[Guest Simon O]

did u need to add the vendor file aswell

Vendor files are optional and only needed for that specific operator. I personally wouldn't use them.

[Guest Davidoff59]

So you would still have to flash b926, unlock boot loader, root and then flash pauls rom? Will Paula rom not update the radio also?

[Guest FrankieADZ]

Vendor files are optional and only needed for that specific operator. I personally wouldn't use them.

ah ok. Thanks for that. :)

[Guest Jekle]

https://docs.google.com/document/d/1MCf3DHJad3HiW0LSBIgvh8g6RcZzIrQX_5F-g8BSLF0/edit?pli=1

I actually followed the Huawei instructions. from what I've heard I need to be on B892 to upgrade to ICS but trying to downgrade to B892 from says update failed. I've tried different SD Cards.

The flasher gave me a log about the downgrade and the ICS flash I'm certain that the same error for both. Even updating from B895 to ICS doesn't work.

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2524

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

Edited July 3, 2012 by Jekle

[Guest Hpez]

http://www.huaweidev...softid=NDE4NjY=

Cheers for that.

Also, sorry if I missed this but when Paul upgraded, did he have stock recovery or was a custom recovery already installed?

[Guest Davidoff59]

[Guest tillaz]

So you would still have to flash b926, unlock boot loader, root and then flash pauls rom? Will Paula rom not update the radio also?

yes, baseband is not included in a rom.zip

unless its extracted from the official update, then it could be manually flashed with something similar to nvflash, the way its done on the lg o2x...

its best just to do the official update really...

[Guest rafaelkaiz]

Ok...

download ICS 4.0.3, dload and vendor in sd.

Firmware update

Step1/2

Unpacking

Firmware update

Step 2/2

Installing

UPDATE FAILED

:S

Edited July 3, 2012 by rafaelkaiz

[Guest Andymac1969]

This is all starting to look a bit exciting :)

[Guest Jekle]

So basically I can't upgrade? I don't why I can't some have successfully downgraded theyre firmware :(

[Guest Davidoff59]

Rafael there should be a log in that dload folder now which will show why it failed.

[Guest]

Updating to B888 stops you going back to B882 and updating to B895 stops you going back to any update before it.

As it appears, B895 stops updating above it too, bit of a borked update really.

Edited July 3, 2012 by Guest

[Guest anything-but]

Re-flashed with official link,used the posted tool....rooted and bootloader unlocked,now just fastbooting cwm. :)

[Guest Jekle]

Updating to B888 stops you going back to B882 and updating to B895 stops you going back to any update before it.

So I have to wait for official European ICS? Or is it possible to upgrade to B926 from B895 :/

[Guest FrankieADZ]

would we be able to use CM9 then?

as dont that use a different baseband?

[Guest rafaelkaiz]

Rafael there should be a log in that dload folder now which will show why it failed.

SD_UPDATE.TXT

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

QCSBLHD_CFGDATA fail.

OEMSBL_VER_LIST,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBLHD_CFGDATA

CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2524

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

[Guest wrtease]

where the offical link anything but i would like to that to.

[Guest anything-but]

Confirmed!!!

Cwm installed,rooted,damm easier than what i did last night! Bargin phone just took steriods. :D

.......Links a few posts back m8. :)

Edited July 3, 2012 by anything-but

[Guest FrankieADZ]

Confirmed!!!

Cwm installed,rooted,damm easier than what i did last night! Bargin phone just took steriods. :D

.......Links a few posts back m8. :)

thats great then :D

[Guest]

So this official update is for U8818, any news on official for U8815? Would be nice if mine comes out of repairs upgraded lol

[Guest tillaz]

would we be able to use CM9 then?

as dont that use a different baseband?

yes, if you update your baseband (flash official ics update) you should use the ril from the ics update on cm9.

ril is found in the lib folder of a rom.zip

EDIT: on my lg its called "lge-ril.so" not sure about huawei