[ICS][B960] ϟTesla ROM For The Huawei Ascend G300ϟ ✰31/05/2013✰

[Guest jugoslav]

a few serious (hope so) questions:

1. is it possible to get icon of CM File Manager in drawer?

2. is it possible to get root access for CM File Manager, Access mode is greyed out,

3. is it possible to get Superuser icon on drawer? (for temporary unroot, since some aps need it)

4. is there anyway to get the volume expandable menu?

5. is there "back to Tesla stock" battery mod zip?

5. is there "back to original video recording resolution" zip?

Edited June 29, 2013 by jugoslav

[Guest kyan31]

a few serious (hope so) questions:

1. is it possible to get icon of CM File Manager in drawer?

2. is it possible to get root access for CM File Manager, Access mode is greyed out,

3. is it possible to get Superuser icon on drawer? (for temporary unroot, since some aps need it)

4. is there anyway to get the volume expandable menu?

5. is there "back to Tesla stock" battery mod zip?

5. is there "back to original video recording resolution" zip?

Look at the addons section. If you can't find any answers, then you can't.

[Guest crisdale]

This issue has occurred on many ROMs and many phones on the forum. You don't have a brick, but right now all you can do is restore using an update. app, an then unlock the bootloader, re-root, reinstall recovery, and then finally flash Tesla. As I said before, this isn't an issue with my ROM exactly, it seems to be possible on any ROM suggesting it's a bootloader problem (maybe?).

If you are stuck, PM me. Thanks.

Kyan...i dont know where to start.. so what is the first step to do before unlock the bootloader, re-root, reinstall recovery, and then finally flash Tesla..? thanks much!!

UPDATE:

so first i need to "install zip from sd card" using recovery mode and i will select the UPDATE.APP....ok ^_^

UPDATE

Kyan, I cant install the update.zip :(

Steps i did using CW:

- Open recovery mode

- selected >> install zip from sdcard

- selected >> choose zip from sdcard

then the below message appeared after i selected the update.zip

--Installing: /sdcard/update.zip

E:Can't mount /cache/recovery/last_install

E:failed to open last_install: Invalid argument

Finding update package...

Opening update package...

E:Can't open /sdcard/update.zip

(bad)

Installation aborted

What should i do now?? :(

Edited June 29, 2013 by crisdale

[Guest kyan31]

Kyan...i dont know where to start.. so what is the first step to do before unlock the bootloader, re-root, reinstall recovery, and then finally flash Tesla..? thanks much!!

UPDATE:

so first i need to "install zip from sd card" using recovery mode and i will select the UPDATE.APP....ok ^_^

UPDATE

Kyan, I cant install the update.zip :(

Steps i did using CW:

- Open recovery mode

- selected >> install zip from sdcard

- selected >> choose zip from sdcard

then the below message appeared after i selected the update.zip

--Installing: /sdcard/update.zip

E:Can't mount /cache/recovery/last_install

E:failed to open last_install: Invalid argument

Finding update package...

Opening update package...

E:Can't open /sdcard/update.zip

(bad)

Installation aborted

What should i do now?? :(

I said 'update.app', not update zip. This has nothing to do with the recovery at all.

1. Download the ICS UPDATE. APP, NOT ZIP. You can ask someone on the forum to upload one, maybe keep a new thread.

2. Make a dload folder in your internal memory, and drop the .app inside.

3. Take out the battery, put it back in, and power the phone on while holding both volume buttons +/- simultaneously.

4. A pink bar should show, let it progress to the end and you should boot into stock ICS, completely unmodded.

Edited June 29, 2013 by kyan31

[Guest crisdale]

I said 'update.app', not update zip. This has nothing to do with the recovery at all.

1. Download the ICS UPDATE. APP, NOT ZIP. You can ask someone on the forum to upload one, maybe keep a new thread.

2. Make a dload folder in your internal memory, and drop the .app inside.

3. Take out the battery, put it back in, and power the phone on while holding both volume buttons +/- simultaneously.

4. A pink bar should show, let it progress to the end and you should boot into stock ICS, completely unmodded.

Ok thanks i get it now ^_^, but how can i access the internal memory? when i connect my phone to the laptop the sd card and internal memory can't be detected....

[Guest kyan31]

Ok thanks i get it now ^_^, but how can i access the internal memory? when i connect my phone to the laptop the sd card and internal memory can't be detected....

Put the .APP on your external SD card then, there shouldn't really be a difference. Hopefully you have a SD card reader handy.

[Guest crisdale]

Put the .APP on your external SD card then, there shouldn't really be a difference. Hopefully you have a SD card reader handy.

Thanks much!! :) Updating in progress..........

UPDATE:

The pink updating bar is still in progress...it's been 30 minutes or so...i dont know if it hanged up or what...

What will happen if my phone shut off because the battery is drained in the middle of this update? or if i just restart updating...? the pink bar is not moving now.....

Edited June 29, 2013 by crisdale

[Guest Tosty55]

If I were to install back the official stock ICS update would it include the Huawei All Backup app?

Edited June 29, 2013 by Tosty55

[Guest jugoslav]

what a pity

really nice ROM, with possibility of little improvements

1. no icon of CM File Manager in drawer

2. no root access for CM File Manager, Access mode is greyed out,

3. no Superuser icon on drawer (for temporary unroot, since some aps need it)

4. no volume expandable menu

5. no "back to original video recording resolution" zip

6. trebuchet crashes when resizing some widgets

those are just face lifting improvements i suggest, since I'm ordinary user not developer

I'm sure there are some system improvement issues, but think not much of them

but

developer easy offensive and not willing for support

look what he answered on my last question:

"Look at the addons section. If you can't find any answers, then you can't."

in other words:

I don't care for you, look op and if not there you r on your own, i don't want to help you

good luck

hope you'll get laptop very soon

PS: on the other hand, Nikola Tesla was a genius

Edited June 29, 2013 by jugoslav

[Guest kyan31]

what a pity

really nice ROM, with possibility of little improvements

1. no icon of CM File Manager in drawer

2. no root access for CM File Manager, Access mode is greyed out,

3. no Superuser icon on drawer (for temporary unroot, since some aps need it)

4. no volume expandable menu

5. no "back to original video recording resolution" zip

6. trebuchet crashes when resizing some widgets

those are just face lifting improvements i suggest, since I'm ordinary user not developer

I'm sure there are some system improvement issues, but think not much of them

but

developer easy offensive and not willing for support

look what he answered on my last question:

"Look at the addons section. If you can't find any answers, then you can't."

in other words:

I don't care for you, look op and if not there you r on your own, i don't want to help you

good luck

hope you'll get laptop very soon

PS: on the other hand, Nikola Tesla was a genius

Its not that I don't care dude, it's just hard writing whole paragraphs of writing on my G300. Give me a break lol :blink:

Also, you need to learn to use common sense. If you can't find your answer, that probably means there is no solution. Do you seriously think I can make a CM root access fix on my phone then send it to you? If I can, please tell me how, I'd appreciate it.

[Guest kyan31]

If I were to install back the official stock ICS update would it include the Huawei All Backup app?

Yes

[Guest jugoslav]

Its not that I don't care dude, it's just hard writing whole paragraphs of writing on my G300. Give me a break lol :blink:

Also, you need to learn to use common sense. If you can't find your answer, that probably means there is no solution. Do you seriously think I can make a CM root access fix on my phone then send it to you? If I can, please tell me how, I'd appreciate it.

ok

so when u get new laptop would u be able to fix some issues i mention?

i would love to have this ROM on my daughters G300

just wont to needle you to do something i would like, maybe on a wrong way, sorry

Edited June 29, 2013 by jugoslav

[Guest kyan31]

ok

so when u get new laptop would u be able to fix some issues i mention?

i would love to have this ROM on my daughters G300

just wont to needle you to do something i would like, maybe on a wrong way, sorry

Of course I'll fix these issues, i'll make big updates both to Tesla and Electra.

[Guest jamie_w]

Kyan would it work if i took an MMS.apk from another rom (from system/app) and used it in this rom?

[Guest jugoslav]

Of course I'll fix these issues, i'll make big updates both to Tesla and Electra.

when to expect that?

PS: joking with me?

Edited June 29, 2013 by jugoslav

[Guest kyan31]

when to expect that?

When I get a new PC goddammit :rolleyes:

[Guest jugoslav]

When I get a new PC goddammit :rolleyes:

thanxxxxxxxxxxxxxxxxx

[Guest kyan31]

3. no Superuser icon on drawer (for temporary unroot, since some aps need it)

I don't know if you haven't noticed, but Koush's Superuser is used in Tesla, not Superuser by ChainsDD. Koush's Superuser doesn't have temporary unroot etc. so I don't know why your expecting it to be there. It's just a simple root manager with only the needed features.

[Guest crisdale]

Hi Kyan, I still unable to make my phone reboot.. :( the pink progress bar always stops somewhere before it reaches the middle of update.. i waited until my battery got drained.. :(

do you guys know what else can i do? im stuck now.. :(

Log message that i found inside the dload folder:

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

Edited June 30, 2013 by crisdale

[Guest jugoslav]

I don't know if you haven't noticed, but Koush's Superuser is used in Tesla, not Superuser by ChainsDD. Koush's Superuser doesn't have temporary unroot etc. so I don't know why your expecting it to be there. It's just a simple root manager with only the needed features.

is it possible to change it with ChainsDD's Superuser?

if not, there are some apps which can hide root.

PS: maybe i ask stupid and silly questions, sorry

Edited June 30, 2013 by jugoslav

[Guest plewis1981]

Hi Kyan, I still unable to make my phone reboot.. :( the pink progress bar always stops somewhere before it reaches the middle of update.. i waited until my battery got drained.. :(

do you guys know what else can i do? im stuck now.. :(

Log message that i found inside the dload foleder:

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

You could try a different stock ROM I hear b926 is the best to use to unbrick.

[Guest crisdale]

You could try a different stock ROM I hear b926 is the best to use to unbrick.

Hi Plewis, can you tell me where to get this stock ROM?? thanks much!

[Guest plewis1981]

Hi Plewis, can you tell me where to get this stock ROM?? thanks much!

This is a plus hear on modaco of all stock ROMs. You will need to make sure to download .app file and not .zip as this list contains both.

[Guest crisdale]

http://www.modaco.co...oms-u8815u8818/

This is a plus hear on modaco of all stock ROMs. You will need to make sure to download .app file and not .zip as this list contains both.

Im stock now :( still the pink progress bar stops and takes forever... :(

anyway thanks for the help..

[Guest kyan31]

Hi Kyan, I still unable to make my phone reboot.. :( the pink progress bar always stops somewhere before it reaches the middle of update.. i waited until my battery got drained.. :(

do you guys know what else can i do? im stuck now.. :(

Log message that i found inside the dload folder:

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

filename = /mmc1/dload/update.app

new partition same as old.

call RCV_MODULE_END_EVENT failed,module = QCSBLHD_CFGDATA

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

QCSBL fail.

QCSBLHD_CFGDATA,is_rx_finish=0,is_operate_succ=1,current_operate=2

call dload_machine data process failed,module = QCSBL

CMD=0xf,moduleaddr = 0xe2000000, len_tmp=0x8000

dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!

What update.app are you using?