Jump to content

Project:Android 2.3.X Gingerbread (gb) Porting on Samsung i8000 (Omnia 2 - O2) !!!


Guest argentinos
 Share

Recommended Posts

no, i cant do anything with usb because my usbport is completely broken...

So if you're agree i would like upload (link is ready) whole rom, with this features: data, music, voice, swap, usb mass storage, adb, internal sd, external sd, bluetooth and sperimental wifi.

It could be base for future steps.

Link to comment
Share on other sites

Same story... Now i will replace libertasspi from different ROM...

Please, did you are able start wifi from Settings UI without message error?

Edited by spiderman1961
Link to comment
Share on other sites

I not fixed for WiFi settings yet.

Replaced with libertasspi from some other ROM for our phone. Result "0". May be i did somthing wrong, but now my tooth switched "On" star searching and finaly found nothing. It lock like libertasspi not working.

What is exact place for loadind that driver - init.rc or mount.sh ?

Link to comment
Share on other sites

I not fixed for WiFi settings yet.

Replaced with libertasspi from some other ROM for our phone. Result "0". May be i did somthing wrong, but now my tooth switched "On" star searching and finaly found nothing. It lock like libertasspi not working.

What is exact place for loadind that driver - init.rc or mount.sh ?

You cannot load wifi firmware on boot, because android loads it when turning on, and unloads when turning off.

Libertasspi if loaded on init or mount inhibits deepsleep.

But if you can flag on /Wireless&Network/Wifi you have made a step forward, because on my phone i can't flag it.

If so please post changes

Link to comment
Share on other sites

Here is my Version 3:

working:

audio

phone

data

vibration

deepsleep

Bluetooth <---- pls test

partialy working:

wifi <---- edit /system/etc/wifi/wpa_supplicant.conf with yout wifi details - to start or stop wifi type in terminal emulator "start wifi" as root

Download:

http://www12.zippysh...17982/file.html

I repeated the installation 5 times: the rom starts with setup wizard and asked to choose the installation language (nice).

Once the process is completed these are the results:

-missing-line phone

-Terminal Force close

-inability to start anything including wifi

-----------------------Update--------------------------------

Seventh installation:

Used another terminal emulator: now su permission denied, rom not rooted

Edited by spiderman1961
Link to comment
Share on other sites

I tested last changes of dni123 and unfortunately at least on my phone got worse

So I post link to whole ROM whole rom, with this features:

data,

music,

voice,

swap,

usb mass storage,

adb,

internal sd, external sd,

bluetooth and sperimental wifi.

I ask to make necessary changes for the bluetooth (my edits do not allow pairing) and the wifi bootable with the command from the terminal.

In this way we will have almost everything working except room, fm and gps

I Link two versions of rom:

one installing by Ubuntu

and

other installing with Image for Windows

Edited by spiderman1961
Link to comment
Share on other sites

i made some improvements on build.prop and used the best kernel i know so far. i tested the same ROM with Benchmark_&_Tuning

results before

cpu 986

mem 484

i/o 295

results after

cpu 1128

mem 499

i/o 321

so i advice you make the changes on the project. download from here http://www.ziddu.com/download/22817414/and23.zip.html

just for history the best results i saw on our android phone were on CM6 android 2.2 froyo

with my cm6new ROM

cpu 1287

mem 737

i/o 1396

with twisterv2

cpu 1312

mem 759

i/o 1083

Link to comment
Share on other sites

Many users have written me in pm that while appreciating work's team, they were very confused by contradictory reports which are sometimes published: because of what somebody, though they had a great experience, could contribute, balked.

Others have written me always pm that progress made ​​is not useful at all because even here numerous and often conflicting patches that have been released, along with release not working than it has announced.

We recognize talent of dni123, without which we would not have done "some" progress....but now we must be more clear to help our users

On behalf of Team I have integrated all made progress so far in a single file that is Alpha version with these working features:

-Radio and data (credits to dni123)

-Display stand by (credits to dni123)

-Sound (credits to dni123)

-Vibration (credits to dni123)

-Deepsleep (credits to dni123)

-Bluetooth (credits to dni123)

-Wifi partially working (credits to dni123)

-Swap (credits to Spiderman1961)

-Usb Mass Storage (credits to Spiderman1961)

-External sd mounting as "sdcard" (credits to Spiderman1961)

-Internal sd mounting as "storage" (credits to Spiderman1961)

-ADB (credits to Spiderman1961)

Alpha version is available to everyone wants test it and collaborate.

I Please anyone wants try to improve rom to use this base because it has integrated all made progress so far....

I extend the same invitation to talented dni123, which has usb broken and doesn't use microsd: so for him was impossible implement fixes about them

Here is

link for Ubuntu installation

Here is

link for Image installation

Please, Argentinos, can you update first post linking news and alpha release?

Thank you so much

Edited by spiderman1961
Link to comment
Share on other sites

i made some improvements on build.prop and used the best kernel i know so far. i tested the same ROM with Benchmark_&_Tuning.....

Thank you argentinos :)

Just tested your build.prop, but on my phone dropped com.android.phone process...

I had to reinstall Rom

Link to comment
Share on other sites

kernel and build.prop are runnng perfect on my phone. dni123 can you also test please ? it can also cause you problems, open the file and and copy some tweaks from my build,prop the yours to make our ROM faster.

ps. on initial build.prop i can see at the bottom the following lines

ro.media.capture.maxres=8m

ro.media.capture.fast.fps=4

ro.media.capture.slow.fps=60

ro.media.capture.flash=led

ro.media.capture.classification=classD

ro.media.capture.useDFR=1

ro.media.camera.focal=3564.0,3564.0

ro.media.camera.principal=1632.0,1224.0

ro.media.camera.skew=0.0

ro.media.camera.distortion=0.0,0.0,0.0,0.0,0.0

ro.media.camera.calresolution=3264,2448

i searched all s3c6410 android clones and found nowhere these settings. these settings are copied from an 8mp phone which does not exist on s3c6410. so it can cause extra problems to our camera. dni123 you imported them or just found them on s8000 ROM ? if you imported why you did ? i suggest delete them.

Edited by argentinos
Link to comment
Share on other sites

Tested Alpha with bould.prop from argentinos.

Working... Titanium 6.04 no SU rights. DSPManager - error, can be deleted.

No data for me.

No USB Mass Storage. Did not tested ADB.

Phone - call in-out, sms in-out - OK.

All the rest are OK.

Edited by Antoxa1998
Link to comment
Share on other sites

Tested Alpha with bould.prop from argentinos.

Working... Titanium 6.04 no SU rights. DSPManager - error, can be deleted.

No data for me.

No USB Mass Storage. Did not tested ADB.

Phone - call in-out, sms in-out - OK.

All the rest are OK.

When i reinstalled Alpha1 i wait complete boot (2-3 min) and then i rebooted: USB and ADB workinkg (they don't work on first boot after installation). Superuser is OK...

I'm working now while write with these features on alpha 1

Here are some screenshots

post-994390-0-13888100-1377672381_thumb.

post-994390-0-93178100-1377672392_thumb.

post-994390-0-97981300-1377672449_thumb.

post-994390-0-03417300-1377672469_thumb.

post-994390-0-34767400-1377672480_thumb.

post-994390-0-12850800-1377673606_thumb.

Edited by spiderman1961
Link to comment
Share on other sites

Re-installed from begining again.

SU - Ok for all apps.

Data - same as before, not possible to make connection.

"su" for root and then "logcat -d -b radio" - Unable to open log device /dev/log/radio, permission denied.

Edited by Antoxa1998
Link to comment
Share on other sites

Re-installed from begining again.

SU - Ok for all apps.

Data - same as before, not possible to make connection.

"su" for root and then "logcat -d -b radio" - Unable to open log device /dev/log/radio, permission denied.

On my phone just now 3g connected and about logcat radio this is screenshot on my device

Did you use .tbi image?

post-994390-0-38135700-1377680575_thumb.

Link to comment
Share on other sites

I used archive>will try image. First i need download it.

And why Ubuntu installation should be different from image ?

Edited by Antoxa1998
Link to comment
Share on other sites

I used archive>will try image. First i need download it.

And why Ubuntu installation should be different from image ?

They are same: but when i reinstalled i used .tbi image and all works. So i'm sure about it.

With ubuntu after decompression do you change permission typing "sudo chmod 777 /media/disk/"?

Edited by spiderman1961
Link to comment
Share on other sites

Answer - yes.

Installed from image boot ok, reboot -

In terminal "su" for root and then "logcat -d -b radio" - Unable to open log device /dev/log/radio, permission denied. :o :o :o :wub:

ADB shows me Radio - unknown.

ADB Terminal can read logcat from radio, last line - closed.

Edited by Antoxa1998
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.