Guest glossywhite Posted October 2, 2013 Report Share Posted October 2, 2013 (edited) ## THIS IS AN OUTBOUND DATA PIPE - QUESTIONS WILL NOT BE RESPONDED TO - IF THIS DATA IS PERTINENT TO YOUR KNOWLEDGE LEVEL, YOU WON'T NEED HELP ## VARIOUS: Processor : ARMv7 Processor rev 0 (v7l) processor : 0 BogoMIPS : 1631.46 processor : 1 BogoMIPS : 1631.46 processor : 2 BogoMIPS : 1631.46 processor : 3 BogoMIPS : 1631.46 Features : swp half thumb fastmult vfp edsp neon vfpv3 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0 Hardware : RK30board Revision : 0000 Serial : 0000000000000000 rootfs / rootfs ro,relatime 0 0 tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0 devpts /dev/pts devpts rw,relatime,mode=600 0 0 none /dev/cpuctl cgroup rw,relatime,cpu 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 /sys/kernel/debug /sys/kernel/debug debugfs rw,relatime 0 0 none /acct cgroup rw,relatime,cpuacct 0 0 tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0 tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0 tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0 /dev/block/mtdblock7 /system ext4 ro,noatime,nodiratime,barrier=1,data=ordered,noauto_da_alloc 0 0 /dev/block/mtdblock9 /data ext4 rw,nosuid,nodev,noatime,nodiratime,barrier=1,data=ordered,noauto_da_alloc 0 0 /dev/block/mtdblock5 /cache ext4 rw,nosuid,nodev,noatime,nodiratime,barrier=1,data=ordered,noauto_da_alloc 0 0 /dev/fuse /mnt/shell/emulated fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0 tmpfs /storage/emulated tmpfs rw,nosuid,nodev,relatime,mode=050,gid=1028 0 0 /dev/fuse /storage/emulated/0 fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0 /dev/fuse /storage/emulated/0/Android/obb fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0 /dev/fuse /storage/emulated/legacy fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0 /dev/fuse /storage/emulated/legacy/Android/obb fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0 MemTotal: 1048576 kB MemFree: 26028 kB Buffers: 2732 kB Cached: 100444 kB SwapCached: 0 kB Active: 500260 kB Inactive: 55252 kB Active(anon): 454080 kB Inactive(anon): 6060 kB Active(file): 46180 kB Inactive(file): 49192 kB Unevictable: 1664 kB Mlocked: 0 kB HighTotal: 548864 kB HighFree: 1408 kB LowTotal: 335748 kB LowFree: 24620 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 454060 kB Mapped: 59752 kB Shmem: 6140 kB Slab: 17472 kB SReclaimable: 5292 kB SUnreclaim: 12180 kB KernelStack: 7000 kB PageTables: 11908 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 442304 kB Committed_AS: 8200812 kB VmallocTotal: 516096 kB VmallocUsed: 95236 kB VmallocChunk: 372612 kB acct bcm4329_cybertan.hcd bcm4329_samsung.hcd bcm4329_usi.hcd cache charger config d data default.prop dev drmboot.ko etc init init.goldfish.rc init.rc init.rk30board.rc init.rk30board.usb.rc init.trace.rc init.usb.rc mnt proc res rk30xxnand_ko.ko.3.0.36+ rk30xxnand_ko.ko.3.0.8+ root sbin sdcard storage sys system ueventd.goldfish.rc ueventd.rc ueventd.rk30board.rc vendor BusyBox v1.11.1 (2009-03-11 09:17:49 CST) multi-call binary Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko and others. Licensed under GPLv2. See source distribution for full notice. Usage: busybox [function] [arguments]... or: function [arguments]... BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Most people will create a link to busybox for each function they wish to use and BusyBox will act like whatever it was invoked as! Currently defined functions: [, [[, addgroup, adduser, adjtimex, ar, arp, arping, ash, awk, basename, brctl, bunzip2, bzcat, bzip2, cal, cat, catv, chat, chattr, chgrp, chmod, chown, chpasswd, chpst, chroot, chrt, chvt, cksum, clear, cmp, comm, cp, cpio, crond, crontab, cryptpw, cttyhack, cut, date, dc, dd, deallocvt, delgroup, deluser, depmod, df, dhcprelay, diff, dirname, dmesg, dnsd, dos2unix, du, dumpkmap, dumpleases, echo, ed, egrep, eject, env, envdir, envuidgid, ether-wake, expand, expr, fakeidentd, false, fbset, fbsplash, fdflush, fdformat, fdisk, fetchmail, fgrep, find, fold, free, freeramdisk, fsck, fsck.minix, ftpget, ftpput, fuser, getopt, getty, grep, gunzip, gzip, halt, hdparm, head, hexdump, hostid, hostname, httpd, hush, hwclock, id, ifconfig, ifdown, ifenslave, ifup, inetd, init, inotifyd, insmod, install, ip, ipaddr, ipcalc, ipcrm, ipcs, iplink, iproute, iprule, iptunnel, kbd_mode, kill, killall, killall5, klogd, lash, last, length, less, linux32, linux64, linuxrc, ln, loadfont, loadkmap, logger, login, logname, logread, losetup, lpd, lpq, lpr, ls, lsattr, lsmod, lzmacat, makedevs, man, md5sum, mdev, mesg, microcom, mkdir, mkfifo, mkfs.minix, mknod, mkswap, mktemp, modprobe, more, mount, mountpoint, msh, mt, mv, nameif, nc, netstat, nice, nmeter, nohup, nslookup, od, openvt, passwd, patch, pgrep, pidof, ping, ping6, pipe_progress, pivot_root, pkill, poweroff, printenv, printf, ps, pscan, pwd, raidautorun, rdate, readahead, readlink, readprofile, realpath, reboot, renice, reset, resize, rm, rmdir, rmmod, route, rpm, rpm2cpio, rtcwake, run-parts, runlevel, runsv, runsvdir, rx, script, sed, sendmail, seq, setarch, setconsole, setkeycodes, setlogcons, setsid, setuidgid, sh, sha1sum, slattach, sleep, softlimit, sort, split, start-stop-daemon, stat, strings, stty, su, sulogin, sum, sv, svlogd, swapoff, swapon, switch_root, sync, sysctl, syslogd, tac, tail, tar, taskset, tcpsvd, tee, telnet, telnetd, test, tftp, tftpd, time, top, touch, tr, traceroute, true, tty, ttysize, udhcpc, udhcpd, udpsvd, umount, uname, uncompress, unexpand, uniq, unix2dos, unlzma, unzip, uptime, usleep, uudecode, uuencode, vconfig, vi, vlock, watch, watchdog, wc, wget, which, who, whoami, xargs, yes, zcat, zcip USER PID PPID VSIZE RSS WCHAN PC NAME root 1 0 548 412 ffffffff 00000000 S /init root 2 0 0 0 ffffffff 00000000 S kthreadd root 3 2 0 0 ffffffff 00000000 S ksoftirqd/0 root 4 2 0 0 ffffffff 00000000 S kworker/0:0 root 6 2 0 0 ffffffff 00000000 S migration/0 root 7 2 0 0 ffffffff 00000000 S migration/1 root 8 2 0 0 ffffffff 00000000 S kworker/1:0 root 9 2 0 0 ffffffff 00000000 S ksoftirqd/1 root 10 2 0 0 ffffffff 00000000 S migration/2 root 12 2 0 0 ffffffff 00000000 S ksoftirqd/2 root 13 2 0 0 ffffffff 00000000 S migration/3 root 15 2 0 0 ffffffff 00000000 S ksoftirqd/3 root 16 2 0 0 ffffffff 00000000 S khelper root 17 2 0 0 ffffffff 00000000 S suspend_sys_syn root 18 2 0 0 ffffffff 00000000 S suspend root 19 2 0 0 ffffffff 00000000 S kconsole root 20 2 0 0 ffffffff 00000000 S sync_supers root 21 2 0 0 ffffffff 00000000 S bdi-default root 22 2 0 0 ffffffff 00000000 S kblockd root 23 2 0 0 ffffffff 00000000 S khubd root 24 2 0 0 ffffffff 00000000 S irq/58-rk30-adc root 25 2 0 0 ffffffff 00000000 S kworker/0:1 root 26 2 0 0 ffffffff 00000000 S cfg80211 root 27 2 0 0 ffffffff 00000000 S fb-vsync root 28 2 0 0 ffffffff 00000000 S fb-vsync root 29 2 0 0 ffffffff 00000000 S rk_battery root 30 2 0 0 ffffffff 00000000 S cfinteractive root 32 2 0 0 ffffffff 00000000 S rk3188_cpufreqd root 33 2 0 0 ffffffff 00000000 S kswapd0 root 34 2 0 0 ffffffff 00000000 S fsnotify_mark root 35 2 0 0 ffffffff 00000000 S crypto root 48 2 0 0 ffffffff 00000000 S irq/95-rga root 55 2 0 0 ffffffff 00000000 S f_mtp root 56 2 0 0 ffffffff 00000000 S file-storage root 59 2 0 0 ffffffff 00000000 S ft5606_0x74_ts root 60 2 0 0 ffffffff 00000000 S binder root 62 2 0 0 ffffffff 00000000 S kworker/u:3 root 63 2 0 0 ffffffff 00000000 S krfcommd root 64 2 0 0 ffffffff 00000000 S hdmi root 65 2 0 0 ffffffff 00000000 S irq/254-2-004c root 67 2 0 0 ffffffff 00000000 S ddrfreqd root 68 2 0 0 ffffffff 00000000 S rk_cam_wkque_ci root 69 1 356 4 ffffffff 00000000 S /sbin/ueventd root 75 2 0 0 ffffffff 00000000 S rknand_buffer root 76 2 0 0 ffffffff 00000000 S mtdblock0 root 77 2 0 0 ffffffff 00000000 S mtdblock1 root 78 2 0 0 ffffffff 00000000 S mtdblock2 root 79 2 0 0 ffffffff 00000000 S mtdblock3 root 80 2 0 0 ffffffff 00000000 S mtdblock4 root 81 2 0 0 ffffffff 00000000 S mtdblock5 root 82 2 0 0 ffffffff 00000000 S mtdblock6 root 83 2 0 0 ffffffff 00000000 S mtdblock7 root 84 2 0 0 ffffffff 00000000 S mtdblock8 root 85 2 0 0 ffffffff 00000000 S mtdblock9 root 89 2 0 0 ffffffff 00000000 S jbd2/mtdblock7- root 90 2 0 0 ffffffff 00000000 S ext4-dio-unwrit root 92 2 0 0 ffffffff 00000000 S jbd2/mtdblock9- root 93 2 0 0 ffffffff 00000000 S ext4-dio-unwrit root 95 2 0 0 ffffffff 00000000 S jbd2/mtdblock5- root 96 2 0 0 ffffffff 00000000 S ext4-dio-unwrit root 97 2 0 0 ffffffff 00000000 S mali_freq_workq shell 98 1 824 132 ffffffff 00000000 S /system/bin/sh system 99 1 892 268 ffffffff 00000000 S /system/bin/servicemanager root 100 1 4068 424 ffffffff 00000000 S /system/bin/vold root 101 1 10228 712 ffffffff 00000000 S /system/bin/netd root 102 1 936 128 ffffffff 00000000 S /system/bin/debuggerd system 103 1 101256 7320 ffffffff 00000000 S /system/bin/surfaceflinger root 104 1 640620 17132 ffffffff 00000000 S zygote drm 105 1 13224 2996 ffffffff 00000000 S /system/bin/drmserver media 106 1 64452 17568 ffffffff 00000000 S /system/bin/mediaserver install 107 1 924 376 ffffffff 00000000 S /system/bin/installd keystore 109 1 1832 536 ffffffff 00000000 S /system/bin/keystore media_rw 111 1 2320 620 ffffffff 00000000 S /system/bin/sdcard root 112 1 9320 1056 ffffffff 00000000 S /system/bin/glgps root 115 2 0 0 ffffffff 00000000 S irq/42-vdpu root 116 2 0 0 ffffffff 00000000 S irq/41-vepu root 131 2 0 0 ffffffff 00000000 S flush-31:9 system 376 104 765464 51744 ffffffff 00000000 S system_server u0_a29 565 104 713064 45892 ffffffff 00000000 S com.android.systemui root 581 2 0 0 ffffffff 00000000 S dhd_cfg80211_ev root 583 2 0 0 ffffffff 00000000 S dhd_watchdog root 584 2 0 0 ffffffff 00000000 S dhd_dpc root 585 2 0 0 ffffffff 00000000 S dhd_sysioc wifi 615 1 2724 924 ffffffff 00000000 S /system/bin/wpa_supplicant u0_a38 630 104 704676 28844 ffffffff 00000000 R com.google.android.inputmethod.latin u0_a42 647 104 647960 14192 ffffffff 00000000 S com.android.rk.mediafloat radio 661 104 659636 16876 ffffffff 00000000 S com.android.phone system 667 104 647900 14116 ffffffff 00000000 S com.keenhi.helper system 685 104 672164 21348 ffffffff 00000000 S hudl.appupdater system 701 104 648024 14452 ffffffff 00000000 S hudl.setup u0_a2 711 104 654444 17612 ffffffff 00000000 S hudl.devicemonitor u0_a36 727 104 655228 15792 ffffffff 00000000 S system u0_a4 808 104 675028 17292 ffffffff 00000000 S com.google.process.location u0_a74 822 104 647908 14428 ffffffff 00000000 S com.android.location.fused u0_a3 836 104 663200 20164 ffffffff 00000000 S android.process.media u0_a4 855 104 690860 21032 ffffffff 00000000 S com.google.process.gapps u0_a15 870 104 647884 14232 ffffffff 00000000 S com.android.smspush u0_a39 925 104 666600 23516 ffffffff 00000000 S com.google.android.apps.currents dhcp 995 1 984 300 ffffffff 00000000 S /system/bin/dhcpcd u0_a22 1114 104 731120 69856 ffffffff 00000000 S com.android.vending u0_a26 1522 104 678272 20152 ffffffff 00000000 S com.google.android.music:main u0_a8 2218 104 753620 40968 ffffffff 00000000 S com.android.launcher root 2729 2 0 0 ffffffff 00000000 S kworker/3:1 root 3858 2 0 0 ffffffff 00000000 S kworker/2:1 root 3985 2 0 0 ffffffff 00000000 S kworker/0:2 u0_a4 4547 104 763316 20788 ffffffff 00000000 S com.google.android.gms root 4613 2 0 0 ffffffff 00000000 S kworker/u:2 root 4755 2 0 0 ffffffff 00000000 S kworker/1:1 system 4865 104 665372 29420 ffffffff 00000000 S com.android.settings root 4977 2 0 0 ffffffff 00000000 S kworker/3:0 u0_a4 5123 104 663660 19236 ffffffff 00000000 S com.google.android.gsf.login u0_a83 5137 104 738160 108652 ffffffff 00000000 S com.channel4.ondemand root 5152 2 0 0 ffffffff 00000000 S kworker/2:0 u0_a81 5206 104 669764 30332 ffffffff 00000000 S com.estrongs.android.pop u0_a81 5259 5206 1808 156 ffffffff 00000000 S /data/data/com.estrongs.android.pop/files/libestool2.so root 5312 2 0 0 ffffffff 00000000 S kworker/u:1 u0_a84 5335 104 734992 80732 ffffffff 00000000 S org.adblockplus.android u0_a84 5366 5335 0 0 ffffffff 00000000 Z Thread-409 u0_a29 5464 104 679876 40436 ffffffff 00000000 S com.android.systemui:screenshot u0_a43 5508 104 698612 37724 ffffffff 00000000 S com.google.android.googlequicksearchbox u0_a12 5524 104 649240 16380 ffffffff 00000000 S com.google.android.partnersetup root 5644 2 0 0 ffffffff 00000000 S kworker/1:2 u0_a77 5661 104 647900 15644 ffffffff 00000000 S com.android.defcontainer u0_a1 5675 104 657212 21888 ffffffff 00000000 S android.process.acore u0_a59 5695 104 653388 19828 ffffffff 00000000 S com.google.android.gallery3d u0_a64 5710 104 666160 29176 ffffffff 00000000 S com.google.android.apps.plus u0_a85 5723 104 669996 25188 ffffffff 00000000 R jackpal.androidterm u0_a68 5743 104 648008 15848 ffffffff 00000000 S com.android.musicfx u0_a85 5762 5723 828 492 c057dba4 4003309c S /system/bin/sh root 5969 2 0 0 ffffffff 00000000 S kworker/u:0 root 6060 2 0 0 ffffffff 00000000 S kworker/2:2 root 6104 2 0 0 ffffffff 00000000 S kworker/0:3 u0_a85 6140 5762 1152 228 00000000 400374a0 R ps Edited October 3, 2013 by glossywhite Link to comment Share on other sites More sharing options...
Guest glossywhite Posted October 3, 2013 Report Share Posted October 3, 2013 (edited) arbitrary dmesg poll: <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.36+ ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Sep 23 02:05:55 BST 2013 <4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache <4>[ 0.000000] Machine: RK30board <4>[ 0.000000] LCD=1 <6>[ 0.000000] memory reserve: Memory(base:0x79800000 size:80M) reserved for <ion> <6>[ 0.000000] memory reserve: Memory(base:0x78800000 size:16M) reserved for <fb0 buf> <6>[ 0.000000] memory reserve: Memory(base:0x77800000 size:16M) reserved for <ipp buf> <6>[ 0.000000] memory reserve: Memory(base:0x76800000 size:16M) reserved for <fb2 buf> <6>[ 0.000000] memory reserve: Memory(base:0x76200000 size:6M) reserved for <camera_ipp_mem> <6>[ 0.000000] memory reserve: Total reserved 134M <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback <6>[ 0.000000] bootconsole [earlycon0] enabled <4>[ 0.000000] CPU SRAM: copied sram code from c0c56000 to fef00100 - fef02218 <4>[ 0.000000] CPU SRAM: copied sram data from c0c58118 to fef02218 - fef029a4 <4>[ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q <4>[ 0.000000] CLKDATA_MSG: pll_flag = 0x00 <6>[ 0.000000] L310 cache controller enabled <6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B <4>[ 0.000000] DDR DEBUG: version 1.00 20130814 <4>[ 0.000000] DDR DEBUG: fix 2cs bug <4>[ 0.000000] DDR DEBUG: DDR3 Device <4>[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB <4>[ 0.000000] DDR DEBUG: init success!!! freq=300MHz <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90 <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90 <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90 <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90 <4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0 <4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb <4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2 <4>[ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200) <7>[ 0.000000] On node 0 totalpages: 227840 <7>[ 0.000000] free_area_init_node: node 0, pgdat c0c53b80, node_mem_map c16ff000 <7>[ 0.000000] Normal zone: 976 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 89648 pages, LIFO batch:15 <7>[ 0.000000] HighMem zone: 1072 pages used for memmap <7>[ 0.000000] HighMem zone: 136144 pages, LIFO batch:31 <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1f08000 s6976 r8192 d13504 u32768 <7>[ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225792 <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init initrd=0x62000000,0x00120000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00100000@0x00040000(cache),0x00002000@0x00140000(kpanic),0x00200000@0x00142000(system),0x00020000@0x00342000(factory),-@0x00362000(userdata) bootver=2013-05-18#1.20 firmware_ver=4.1.1 <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.000000] Memory: 354MB 536MB = 890MB total <5>[ 0.000000] Memory: 882000k/882000k available, 166576k reserved, 548864K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB) <5>[ 0.000000] vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xde800000 ( 488 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .init : 0xc0408000 - 0xc0575000 (1460 kB) <5>[ 0.000000] .text : 0xc0575000 - 0xc0bd7730 (6538 kB) <5>[ 0.000000] .data : 0xc0bd8000 - 0xc0c559e8 ( 503 kB) <5>[ 0.000000] .bss : 0xc0c59024 - 0xc16fea70 (10903 kB) <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:352 <4>[ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms <4>[ 0.000000] rk_timer: version 1.2 <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.008760] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341) <6>[ 0.017928] pid_max: default: 32768 minimum: 301 <6>[ 0.023254] Mount-cache hash table entries: 512 <6>[ 0.028811] Initializing cgroup subsys debug <6>[ 0.033591] Initializing cgroup subsys cpuacct <6>[ 0.038581] Initializing cgroup subsys freezer <6>[ 0.043566] CPU: Testing write buffer coherency: ok <4>[ 0.129818] CPU1: Booted secondary processor <4>[ 0.169807] CPU2: Booted secondary processor <4>[ 0.209806] CPU3: Booted secondary processor <6>[ 0.209837] Brought up 4 CPUs <6>[ 0.227502] SMP: Total of 4 processors activated (6525.87 BogoMIPS). <6>[ 0.234885] devtmpfs: initialized <6>[ 0.244500] NET: Registered protocol family 16 <6>[ 0.249577] last_log: 0xd5d00000 map to 0xdf004000 and copy to 0xc0c5d1a0 (version 2.1) <4>[ 0.273119] KeenHigh: PowerKey IS NOT Pressed <6>[ 0.278414] lcdc0 is used as primary display device contoller! <6>[ 0.284966] lcdc1 is used as external display device controller! <4>[ 0.291780] this is tcl battery <6>[ 0.395535] rk29sdk_wifi_bt_gpio_control_init: init finished <6>[ 0.403134] console [ttyFIQ0] enabled, bootconsole disabled <6>[ 0.412290] Registered FIQ tty driver d5c63cc0 <6>[ 0.423668] bio: create slab <bio-0> at 0 <5>[ 0.428079] SCSI subsystem initialized <6>[ 0.428289] usbcore: registered new interface driver usbfs <6>[ 0.428400] usbcore: registered new interface driver hub <6>[ 0.442653] usbcore: registered new device driver usb <6>[ 0.443028] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter <6>[ 0.443271] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter <6>[ 0.443663] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter <6>[ 0.443795] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter <6>[ 0.443976] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter <6>[ 0.474235] rk30-adc rk30-adc: rk30 adc: driver initialized <4>[ 0.474469] timed-gpio: probe of timed-gpio failed with error -22 <6>[ 0.474594] Advanced Linux Sound Architecture Driver Version 1.0.24. <6>[ 0.475009] Bluetooth: Core ver 2.16 <6>[ 0.475075] NET: Registered protocol family 31 <6>[ 0.475110] Bluetooth: HCI device and connection manager initialized <6>[ 0.475158] Bluetooth: HCI socket layer initialized <6>[ 0.475195] Bluetooth: L2CAP socket layer initialized <6>[ 0.475243] Bluetooth: SCO socket layer initialized <4>[ 0.476292] ssd2828_gpio_init: request ssd2828_vdd_mipi_PIN error <4>[ 0.476339] ssd2828_gpio_init: request ssd2828_shut_PIN error <4>[ 0.476395] Create proc entry:ssd2828 success! <4>[ 0.476487] rk fb probe ok! <4>[ 0.481336] act8846_set_init,line=17 <4>[ 0.481366] act8846_set_init:g_pmic_type=3 <4>[ 0.483151] act8846_set_init act_dcdc1 =1200000mV end <4>[ 0.485024] act8846_set_init vdd_core =1000000mV end <4>[ 0.486895] act8846_set_init vdd_cpu =1000000mV end <4>[ 0.488766] act8846_set_init act_dcdc4 =3000000mV end <4>[ 0.490009] act8846_set_init act_ldo1 =1000000mV end <4>[ 0.491148] act8846_set_init act_ldo2 =1200000mV end <4>[ 0.492918] act8846_set_init act_ldo3 =1800000mV end <4>[ 0.494055] act8846_set_init act_ldo4 =3300000mV end <4>[ 0.495192] act8846_set_init act_ldo5 =3300000mV end <4>[ 0.496329] act8846_set_init act_ldo6 =3300000mV end <4>[ 0.497465] act8846_set_init act_ldo7 =1800000mV end <4>[ 0.499236] act8846_set_init act_ldo8 =2800000mV end <4>[ 0.499281] act8846_set_init,line=78 END <4>[ 0.499348] i2c-core: driver [act8846] using legacy suspend method <4>[ 0.499393] i2c-core: driver [act8846] using legacy resume method <6>[ 0.499460] Switching to clocksource rk_timer <6>[ 0.499848] Switched to NOHz mode on CPU #3 <6>[ 0.499861] Switched to NOHz mode on CPU #1 <6>[ 0.499873] Switched to NOHz mode on CPU #2 <4>[ 0.506151] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf0a0000 <4>[ 0.506239] fb0:win0 <4>[ 0.506244] fb1:win1 <4>[ 0.506249] fb2:win2 <4>[ 0.506386] rk3188 lcdc0 clk enable... <6>[ 0.509201] Switched to NOHz mode on CPU #0 <4>[ 0.531626] rk3188 lcdc0 clk disable... <4>[ 0.571111] fb0:phy:78800000>>vir:e0000000>>len:0x1000000 <4>[ 0.610599] fb0:phy:77800000>>vir:e2000000>>len:0x1000000 <4>[ 0.610858] rk_fb_register>>>>>fb0 <4>[ 0.611173] rk_fb_register>>>>>fb1 <4>[ 0.611270] rk3188 lcdc0 clk enable... <4>[ 0.611313] lcdc0: dclk:84857142>>fps:58 load mipi dsi chip:ssd2828 id:2828 <6>[ 0.693865] cfg80211: Calling CRDA to update world regulatory domain <6>[ 0.840757] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok! <6>[ 0.840805] lcdc0 wakeup from standby! <6>[ 0.840844] lcdc0 win0 open,atv layer:1 <4>[ 0.860596] rk3188 lcdc0 probe ok! <4>[ 0.860693] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0a4000 <4>[ 0.860777] fb0:win0 <4>[ 0.860782] fb1:win1 <4>[ 0.860787] fb2:win2 <4>[ 0.860866] rk3188 lcdc1 clk enable... <4>[ 0.885946] rk3188 lcdc1 clk disable... <4>[ 0.922791] fb2:phy:76800000>>vir:e4000000>>len:0x1000000 <4>[ 0.923038] rk_fb_register>>>>>fb2 <4>[ 0.931799] rk_fb_register>>>>>fb3 <4>[ 0.931833] rk3188 lcdc1 probe ok! <4>[ 1.072808] regbase df100000 0x0, otg_phy_confed08114, 0xda8 <4>[ 1.123056] cw2015 driver v1.0 probe sucess <6>[ 1.127386] NET: Registered protocol family 2 <6>[ 1.127523] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) <6>[ 1.127872] TCP established hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 1.128861] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) <6>[ 1.130058] TCP: Hash tables configured (established 65536 bind 65536) <6>[ 1.130108] TCP reno registered <6>[ 1.130139] UDP hash table entries: 256 (order: 1, 8192 bytes) <6>[ 1.130196] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) <6>[ 1.130511] NET: Registered protocol family 1 <4>[ 1.130595] lp8556_backlight_probe , line:387 . <6>[ 1.211255] Unpacking initramfs... <6>[ 1.266709] Freeing initrd memory: 1152K <6>[ 1.266825] PMU: registered new PMU device of type 0 <4>[ 1.266947] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 2 <4>[ 1.267001] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 2 <4>[ 1.290025] rk3188 cpufreq version 2.1, suspend freq 1008 MHz <6>[ 1.290640] Loaded driver for PL330 DMAC-1 rk29-pl330 <6>[ 1.290683] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 <6>[ 1.290881] Loaded driver for PL330 DMAC-2 rk29-pl330 <6>[ 1.290922] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 <4>[ 1.318331] highmem bounce pool size: 64 pages <6>[ 1.318518] ashmem: initialized <6>[ 1.327399] fuse init (API version 7.16) <6>[ 1.332068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) <6>[ 1.332123] io scheduler noop registered <6>[ 1.332161] io scheduler deadline registered <6>[ 1.332229] io scheduler cfq registered (default) <6>[ 1.352509] rga: Driver loaded succesfully <4>[ 1.352743] rk_serial.c v1.3 2012-12-14 <6>[ 1.352841] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0 <6>[ 1.539535] rk_serial rk_serial.0: membase 0xdf0bc000 <6>[ 1.539604] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3 <6>[ 1.699536] rk_serial rk_serial.3: membase 0xdf0c0000 <6>[ 1.699732] Rockchip ion module(version: 1.0) is successfully loaded <6>[ 1.701103] loop: module loaded <6>[ 1.701149] Android kernel panic handler initialized (bind=kpanic) <6>[ 1.701715] input: rk_headsetdet as /devices/platform/rk_headsetdet.0/input/input0 <6>[ 1.701791] PPP generic driver version 2.4.2 <6>[ 1.701917] PPP Deflate Compression module registered <6>[ 1.701946] PPP BSD Compression module registered <6>[ 1.742144] PPP MPPE Compression module registered <6>[ 1.742179] NET: Registered protocol family 24 <6>[ 1.742215] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.742242] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> <6>[ 1.742426] usbcore: registered new interface driver asix <6>[ 1.742486] usbcore: registered new interface driver cdc_ether <6>[ 1.742537] usbcore: registered new interface driver dm9620 <6>[ 1.742586] usbcore: registered new interface driver SR9700_android <6>[ 1.742637] usbcore: registered new interface driver net1080 <6>[ 1.742684] usbcore: registered new interface driver cdc_subset <6>[ 1.742744] usbcore: registered new interface driver zaurus <6>[ 1.742783] cdc_ncm: 04-Aug-2011 <6>[ 1.742820] usbcore: registered new interface driver cdc_ncm <4>[ 1.742851] Rockchip WiFi SYS interface (V1.00) ... <6>[ 1.742898] Initializing USB Mass Storage driver... <6>[ 1.742949] usbcore: registered new interface driver usb-storage <6>[ 1.742981] USB Mass Storage support registered. <6>[ 1.743059] usbcore: registered new interface driver usbserial <6>[ 1.743106] USB Serial support registered for generic <6>[ 1.743153] usbcore: registered new interface driver usbserial_generic <6>[ 1.743188] usbserial: USB Serial Driver core <6>[ 1.743226] USB Serial support registered for GSM modem (1-port) <6>[ 1.743295] usbcore: registered new interface driver option <6>[ 1.743327] option: v0.7.2:USB Driver for GSM modems <6>[ 1.955081] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode <6>[ 1.955121] usb20_otg usb20_otg: DWC OTG Controller <6>[ 1.955209] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1 <6>[ 1.955281] usb20_otg usb20_otg: irq 48, io mem 0x00000000 <6>[ 1.955313] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest <6>[ 1.955384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 1.955424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.955467] usb usb1: Product: DWC OTG Controller <6>[ 1.955494] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd <6>[ 1.955526] usb usb1: SerialNumber: usb20_otg <6>[ 1.955805] hub 1-0:1.0: USB hub found <6>[ 1.955834] hub 1-0:1.0: 1 port detected <6>[ 2.020566] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 2.020608] android_usb gadget: Number of LUNs=2 <6>[ 2.020644] lun0: LUN: removable file: (no medium) <6>[ 2.020671] lun1: LUN: removable file: (no medium) <6>[ 2.020829] android_usb gadget: android_usb ready <6>[ 2.021074] input: rk29-keypad as /devices/platform/rk29-keypad/input/input1 <6>[ 2.021251] usbcore: registered new interface driver xpad <6>[ 2.021306] usbcore: registered new interface driver usb_acecad <6>[ 2.021338] acecad: v3.2:USB Acecad Flair tablet driver <6>[ 2.021385] usbcore: registered new interface driver aiptek <6>[ 2.021415] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) <6>[ 2.021459] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen <6>[ 2.021516] usbcore: registered new interface driver gtco <4>[ 2.021544] GTCO usb driver version: 2.00.0006 <6>[ 2.021586] usbcore: registered new interface driver hanwang <6>[ 2.021635] usbcore: registered new interface driver kbtab <6>[ 2.021665] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver <6>[ 2.021724] usbcore: registered new interface driver wacom <6>[ 2.021754] wacom: v1.52:USB Wacom tablet driver <6>[ 2.021799] ft5x0x_ts 2-0038: ft5306_ts_probe! <4>[ 2.021824] ft5306_init_platform_hw <3>[ 2.439851] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2... <3>[ 2.440210] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1... <3>[ 2.440565] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0... <4>[ 2.440613] FT5306 I2C TEST FAILED, retry = 1, ret = -11, will again... <3>[ 2.469848] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2... <3>[ 2.470203] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1... <3>[ 2.470557] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0... <4>[ 2.470607] FT5306 I2C TEST FAILED, retry = 2, ret = -11, will again... <4>[ 2.499546] FT5306 I2C TEST OK, retry = 2, ret = -11 <4>[ 2.499574] FT5306 I2C TEST ERROR! retry = 2, ret = -11 <4>[ 2.499603] ft5606_exit_platform_hw <6>[ 2.499672] ft5606_0x72_ts 2-0039: ft5606_0x72_ts_probe! <4>[ 2.499702] ft5606_0x72_init_platform_hw <3>[ 2.919854] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 2... <3>[ 2.920212] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 1... <3>[ 2.920567] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 0... <4>[ 2.920614] FT5606_0X72 I2C TEST FAILED, retry = 1, ret = -11, will again... <3>[ 2.949835] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 2... <3>[ 2.950190] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 1... <3>[ 2.950545] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 0... <4>[ 2.950592] FT5606_0X72 I2C TEST FAILED, retry = 2, ret = -11, will again... <4>[ 2.979526] FT5606_0X72 I2C TEST OK, retry = 2, ret = -11 <4>[ 2.979558] FT5606_0X72 I2C TEST ERROR! retry = 2, ret = -11 <4>[ 2.979588] ft5606_exit_platform_hw <6>[ 2.979646] ft5606_0x74_ts 2-003a: ft5606_0x74_ts_probe! <4>[ 2.979675] ft5606_0x74_init_platform_hw <4>[ 3.399856] ft5606_0x74 I2C TEST OK, retry = 0, ret = 1 <6>[ 3.399982] input: ft5606_0x74_ts-touchscreen as /devices/virtual/input/input2 <4>[ 3.619999] [TSP] firmware version = 0x33 <4>[ 3.996444] [FTS] upgrade failed i_ret = 2. <6>[ 8.000403] lsm303d driver: init <6>[ 8.000452] lsm303d 0-001d: probe start. <6>[ 8.000477] lsm303d 0-001d: using default plaform_data for accelerometer and magnetometer <6>[ 8.000523] lsm303d: hw init start <6>[ 8.000995] lsm303d: hw init done <6>[ 8.006238] input: lsm303dlh_acc as /devices/platform/rk30_i2c.0/i2c-0/0-001d/input/input3 <6>[ 8.006425] input: lsm303dlh_mag as /devices/platform/rk30_i2c.0/i2c-0/0-001d/input/input4 <6>[ 8.007220] lsm303d 0-001d: lsm303d: probed <6>[ 8.007282] l3gd20_gyr: probe start. <6>[ 8.007305] l3gd20_gyr 0-006b: polling enabled <6>[ 8.007330] l3gd20_gyr hw init <7>[ 8.008351] dev_data->pdata->gpio_int2 = -22 <6>[ 8.009512] input: l3gd20_gyr as /devices/platform/rk30_i2c.0/i2c-0/0-006b/input/input5 <6>[ 8.009693] l3gd20_gyr power off <6>[ 8.016927] using rtc device, rtc_hym8563, for alarms <6>[ 8.016974] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0 <6>[ 8.017033] i2c /dev entries driver <6>[ 8.017446] lirc_dev: IR Remote Control driver registered, major 250 <6>[ 8.017485] IR NEC protocol handler initialized <6>[ 8.017509] IR RC5(x) protocol handler initialized <6>[ 8.017535] IR RC6 protocol handler initialized <6>[ 8.017559] IR JVC protocol handler initialized <6>[ 8.017583] IR Sony protocol handler initialized <6>[ 8.017608] IR RC5 (streamzap) protocol handler initialized <6>[ 8.017638] IR LIRC bridge handler initialized <6>[ 8.017661] Linux video capture interface: v2.00 <4>[ 8.017815] def_ref_volt: 1800mV, curr_ref_volt: 1800mV <4>[ 8.017845] start_charge_logo_display <6>[ 8.018088] device-mapper: uevent: version 1.0.3 <6>[ 8.018271] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] <6>[ 8.018395] Bluetooth: HCI UART driver ver 2.2 <6>[ 8.018422] Bluetooth: HCI H4 protocol initialized <6>[ 8.018448] Bluetooth: HCILL protocol initialized <6>[ 8.018475] Bluetooth: BlueSleep Mode Driver Ver 1.1 <6>[ 8.018623] cpuidle: using governor ladder <6>[ 8.018649] cpuidle: using governor menu <7>[ 8.033934] mmc_rescan:1822,mmc_rescan Begin host name is [mmc0] <7>[ 8.033952] mmc_rescan:1829,find no SDMMC host name is [mmc0] <6>[ 8.034007] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sd_mmc] <7>[ 8.034163] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1] <6>[ 8.034198] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sdio] <6>[ 8.034285] Skipping unavailable LED gpio -1 (button-backlight) <6>[ 8.035309] usbcore: registered new interface driver usbhid <6>[ 8.035341] usbhid: USB HID core driver <6>[ 8.035586] logger: created 256K log 'log_main' <6>[ 8.035656] logger: created 256K log 'log_events' <6>[ 8.035722] logger: created 256K log 'log_radio' <6>[ 8.035787] logger: created 256K log 'log_system' <6>[ 8.075020] asoc: ES8323 HiFi <-> rk29_i2s.1 mapping ok <6>[ 8.075320] ALSA device list: <6>[ 8.075340] #0: RK29_ES8323 <6>[ 8.075428] GACT probability NOT on <6>[ 8.075454] Mirror/redirect action on <6>[ 8.075477] u32 classifier <6>[ 8.075492] Actions configured <6>[ 8.075513] Netfilter messages via NETLINK v0.30. <6>[ 8.075571] nf_conntrack version 0.5.0 (13799 buckets, 55196 max) <6>[ 8.075836] ctnetlink v0.93: registering with nfnetlink. <6>[ 8.075888] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 8.075925] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 8.076183] xt_time: kernel timezone is -0000 <6>[ 8.076320] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 8.076438] arp_tables: (C) 2002 David S. Miller <6>[ 8.076491] TCP cubic registered <6>[ 8.076511] Initializing XFRM netlink socket <6>[ 8.076829] NET: Registered protocol family 10 <6>[ 8.077335] Mobile IPv6 <6>[ 8.077369] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 8.077482] IPv6 over IPv4 tunneling driver <6>[ 8.077991] NET: Registered protocol family 17 <6>[ 8.078034] NET: Registered protocol family 15 <6>[ 8.078220] Bluetooth: RFCOMM TTY layer initialized <6>[ 8.078275] Bluetooth: RFCOMM socket layer initialized <6>[ 8.078304] Bluetooth: RFCOMM ver 1.11 <6>[ 8.078325] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>[ 8.078355] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>[ 8.078473] NET: Registered protocol family 35 <6>[ 8.078608] [BT_RFKILL]: Enter rfkill_rk_init <6>[ 8.099641] [BT_RFKILL]: bt shut off power <6>[ 8.099669] [BT_RFKILL]: bcm4334 device registered. <4>[ 8.271988] CAT66121: Reg[0-3] = 0x[54].[49].[12].[16] <6>[ 8.350040] cat66121_hdmi 2-004c: cat66121 hdmi i2c probe ok <6>[ 8.350206] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <4>[ 8.350266] rk3066b-camera version: v0.2.31 Zoom by ipp <5>[ 8.350324] Registering SWP/SWPB emulation handler <6>[ 8.350739] ddrfreq: verion 2.4 20130427 <6>[ 8.350766] ddrfreq: normal 408MHz video 300MHz dualview 0MHz idle 0MHz suspend 300MHz reboot 300MHz <6>[ 8.351818] ddrfreq: change freq to 408 MHz when normal <6>[ 8.353163] rtc_hym8563 1-0051: setting system clock to 2013-10-03 00:21:23 UTC (1380759683) <6>[ 8.353446] Freeing init memory: 1460K <4>[ 8.359483] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. <3>[ 8.390848] init: could not open /dev/keychord <3>[ 8.391010] init: cannot open '/initlogo.rle' <4>[ 8.491764] Probe mt9t113_back success <4>[ 8.673055] gp_rknand_info = : 0xd5ef3200 <4>[ 8.673124] rk30_chip_set:1 <4>[ 8.673177] request IRQ_NANDC irq , ret=0......... <4>[ 8.673211] FTL INFO:Version = 438,Date = 20130620 <4>[ 8.673278] FlashCopyProgBuf1=0xc15a3000 <4>[ 8.673318] ATime: 40 ns AHB: 140 timming: 1081 <4>[ 8.673344] No.1 FLASH INFO:ff ff ff ff ff <4>[ 8.673366] gBootMedia = 2 gSdmmcFwPartOffset =2000! <4>[ 8.673393] CardId = 2 <4>[ 8.771767] Probe bf3720_front success <4>[ 8.808709] rk29_dma_set_buffdone_fn <4>[ 8.808732] EmmcBus_khz = 48000 <4>[ 8.808758] SDM_Init OK <4>[ 8.809785] SDC_SetHostBusWidth flag 1 , 2 bits <4>[ 8.809824] EmmcBus_khz = 4000 , need = 4000 <4>[ 8.868058] EmmcBus_khz = 24000 , need = 36000 <4>[ 8.868587] EmmcBus_khz = 96000 , need = 100000 <4>[ 8.868615] SDC_SetHostBusWidth flag 3 , 8 bits <4>[ 8.868673] SdmmcInit BootCapSize: 0x400 <4>[ 8.868694] gEmmcBootPart 1 <4>[ 8.869084] SdmmcInit UserCapSize: 0x1d1f000 <4>[ 8.869107] SdmmcInit ret = 0! <4>[ 8.869125] rknand_buffer.c version: 4.38 20121130! <5>[ 8.869245] 10 cmdlinepart partitions found on MTD device rk29xxnand <5>[ 8.869279] Creating 10 MTD partitions on "rk29xxnand": <5>[ 8.869309] 0x000000400000-0x000000800000 : "misc" <5>[ 8.870252] 0x000000800000-0x000001000000 : "kernel" <5>[ 8.871005] 0x000001000000-0x000002000000 : "boot" <5>[ 8.871705] 0x000002000000-0x000004000000 : "recovery" <5>[ 8.872410] 0x000004000000-0x000008000000 : "backup" <5>[ 8.873160] 0x000008000000-0x000028000000 : "cache" <5>[ 8.874179] 0x000028000000-0x000028400000 : "kpanic" <6>[ 8.875595] apanic: Bound to mtd partition 'kpanic' <6>[ 8.875622] apanic: No panic data available <5>[ 8.875759] 0x000028400000-0x000068400000 : "system" <5>[ 8.877093] 0x000068400000-0x00006c400000 : "factory" <5>[ 8.877861] 0x00006c400000-0x0003a3a00000 : "userdata" <6>[ 9.002225] EXT4-fs (mtdblock7): mounted filesystem with ordered data mode. Opts: noauto_da_alloc <6>[ 9.060472] EXT4-fs (mtdblock9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc <6>[ 9.077412] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc <4>[ 9.089726] UMP: Using OS memory backend, allocation limit: 536870912 <4>[ 9.089801] UMP: UMP device driver loaded <4>[ 9.109693] Mali: Mali400 inside of rk3188! <4>[ 9.109739] Mali: mali freq table num : 6 <4>[ 9.109778] Mali: mali freq table :Mali: 132,Mali: 198,Mali: 256,Mali: 297,Mali: 396,Mali: 594,Mali: <4>[ 9.109873] Mali: init mali clock success <4>[ 9.116796] Mali: @@@@@@@Mali device driver loaded success@@@@@@@@ <4>[ 9.126227] mirroring: Unknown symbol video_data_to_mirroring (err 0) <4>[ 9.127496] mirroring: Unknown symbol audio_data_to_mirroring (err 0) <4>[ 9.131251] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned. <4>[ 9.132378] ipp irq 47 <4>[ 9.132817] IPP init, version rk30-ipp 1.003 <3>[ 9.217934] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl' <3>[ 9.226875] init: cannot find '/system/bin/rild', disabling 'ril-daemon' <3>[ 9.226950] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3' <3>[ 9.332162] init: cannot find '/system/bin/chrome.sh', disabling 'chrome' <3>[ 9.332300] init: cannot find '/system/bin/akmd', disabling 'akmd' <3>[ 9.356999] VPU_SERVICE: failed on clk_get pd_video <4>[ 9.357061] vpu: power on <6>[ 9.357132] VPU_SERVICE: checking hw id 4831 <4>[ 9.357629] vpu: power off...done <6>[ 9.357667] VPU_SERVICE: init success <3>[ 9.363843] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}' <3>[ 9.363888] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial' <3>[ 9.364102] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead <3>[ 9.490089] android_usb: already disabled <3>[ 9.490356] android_usb: already disabled <6>[ 9.490578] mtp_bind_config <4>[ 9.597574] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in <4>[ 9.597672] [rknand_sys_storage_ioctl:251] RKNAND_GET_SN_SECTOR <4>[ 9.597762] [rknand_sys_storage_ioctl:365] return ret = 0 <4>[ 9.601511] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in <4>[ 9.601614] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY <4>[ 9.601700] [rknand_sys_storage_ioctl:365] return ret = 0 <4>[ 10.090542] rk fb use 3 buffers <6>[ 10.107494] lcdc0 win1 open,atv layer:2 <6>[ 10.109562] lcdc0 win1 closed,atv layer:1 <3>[ 10.685543] mt9t113 sensor_ioctl cmd(0x3) is unknown ! <3>[ 10.790599] bf3720bf3720 sensor_ioctl cmd(0x3) is unknown ! <6>[ 11.205020] ES8323 4-0010: es8323_off_amp 0 <6>[ 15.826569] warning: `zygote' uses 32-bit capabilities (legacy support in use) <6>[ 17.959570] DWC_OTG: ********vbus detect********************************************* <6>[ 18.144853] DWC_OTG: ********soft connect!!!***************************************** <6>[ 18.150861] DWC_OTG: USB SUSPEND <6>[ 18.283026] DWC_OTG: USB RESET <6>[ 18.355298] android_work: sent uevent USB_STATE=CONNECTED <6>[ 18.358945] DWC_OTG: USB RESET <6>[ 18.448297] android_usb gadget: high speed config #1: android <6>[ 18.448461] android_work: sent uevent USB_STATE=CONFIGURED <6>[ 18.458980] ES8323 4-0010: es8323_off_amp 1 <6>[ 27.615918] request_suspend_state: awake (mem->on) at 27566390254 (2013-10-03 00:21:42.754755253 UTC) <4>[ 28.099255] wifi_set_power = 1 <4>[ 28.100211] wifi_set_power = 1 <6>[ 28.100263] rk29sdk_wifi_power: 1 <6>[ 28.210359] acc_open <6>[ 28.210399] acc_release <6>[ 28.384685] wifi turn on power <4>[ 28.589697] wifi_set_carddetect = 1 <6>[ 28.589789] rk29sdk_wifi_set_carddetect:1 <6>[ 28.589878] mmc1: slot status change detected(0-1) <6>[ 28.589911] rk29_sdmmc_change_clk_div..1935.. newDiv=80, newCLK=300Khz [sdio] <7>[ 28.789737] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1] <6>[ 28.834230] <6>[ 28.834268] mmc_attach_sdio..802.. ===== Begin to identify card as SDIO-card. [mmc1] <7>[ 28.853912] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <7>[ 28.856015] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) <7>[ 28.858136] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) <7>[ 28.862152] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) <7>[ 28.870881] mmc1: queuing unknown CIS tuple 0x80 (14 bytes) <7>[ 28.872638] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <6>[ 28.962239] rk29_sdmmc_change_clk_div..1935.. newDiv=0, newCLK=48000Khz [sdio] <6>[ 28.965623] mmc1: new high speed SDIO card at address 0001 <6>[ 28.967181] mmc_rescan_try_freq..1675.. ===== Initialize SDIO successfully. [mmc1] <4>[ 28.968156] alloc static buf at d5dc0000! <4>[ 28.968877] dhdsdio_probe : no mutex held. set lock <4>[ 28.969393] F1 signature read @0x18000000=0x16034334 <4>[ 28.984255] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 <4>[ 28.990777] wl_create_event_handler thr:20a started <4>[ 28.995279] p2p0: P2P Interface Registered <4>[ 28.995803] dhd_attach thr:20b started <4>[ 28.996444] dhd_attach thr:20d started <4>[ 28.998636] dhd_attach thr:20e started <4>[ 28.998916] wifi_get_mac_addr <4>[ 29.001234] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 <4>[ 29.001346] dhdsdio_probe : the lock is released. <4>[ 29.001789] <4>[ 29.001796] Dongle Host Driver, version 1.88.2 (r388528) <4>[ 29.001811] Compiled in drivers/net/wireless/bcmdhd on Aug 17 2013 at 22:45:42 <4>[ 29.001934] =========== WLAN placed in RESET ======== <4>[ 29.230734] <4>[ 29.230767] Dongle Host Driver, version 1.88.2 (r388528) <4>[ 29.230837] Compiled in drivers/net/wireless/bcmdhd on Aug 17 2013 at 22:45:42 <4>[ 29.231229] wl_android_wifi_on in <4>[ 29.231267] =========== WLAN going back to live ======== <4>[ 29.369625] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. <6>[ 29.688382] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=fe:4d:d4:fc:6d:44 <6>[ 30.820010] mtp_open <4>[ 32.444717] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3 <4>[ 32.524119] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3 <6>[ 37.599605] [BT_RFKILL]: bt shut off power <6>[ 37.629629] [BT_RFKILL]: bt turn on power <7>[ 40.109564] p2p0: no IPv6 routers present <7>[ 40.169572] wlan0: no IPv6 routers present <6>[ 42.069613] ES8323 4-0010: es8323_off_amp 0 <6>[ 44.618626] binder: 771:1452 transaction failed 29189, size 604-4 <6>[ 44.900811] binder: 375:434 transaction failed 29189, size 100-4 <6>[ 46.799810] ES8323 4-0010: es8323_off_amp 1 <6>[ 47.018976] ES8323 4-0010: es8323_off_amp 0 <6>[ 55.760191] ES8323 4-0010: es8323_off_amp 1 <6>[ 57.528094] ES8323 4-0010: es8323_off_amp 0 <6>[ 74.444883] ES8323 4-0010: es8323_off_amp 1 <6>[ 74.916414] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 <6>[ 74.942895] CFG80211-ERROR) wl_is_linkdown : <6>[ 74.946984] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready <4>[ 74.947549] Link down Reason : WLC_E_LINK <6>[ 74.947792] cfg80211: Calling CRDA to update world regulatory domain <4>[ 74.951389] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:c6:3c:2e:6d:b3 <6>[ 74.951478] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH <4>[ 75.111628] wl_android_wifi_off in <4>[ 75.114139] =========== WLAN placed in RESET ======== <4>[ 75.418020] net_ratelimit: 5 callbacks suppressed <4>[ 75.418095] dhdsdio_disconnect : no mutex held. set lock <4>[ 75.418360] dhd_detach thr:20e terminated OK <4>[ 75.679816] dhd_detach thr:20b terminated OK <4>[ 75.680008] dhd_detach thr:20d terminated OK <6>[ 75.839603] CFG80211-ERROR) wl_event_handler : was terminated <4>[ 75.845395] wl_destroy_event_handler thr:20a terminated OK <4>[ 75.989900] wd wakelock count:0 <4>[ 75.993171] dhdsdio_disconnect : the lock is released. <4>[ 75.993563] ## wifi_remove <4>[ 75.993588] wifi_set_power = 0 <6>[ 75.993612] rk29sdk_wifi_power: 0 <6>[ 76.198269] wifi shut off power <4>[ 76.198303] wifi_set_carddetect = 0 <6>[ 76.198347] rk29sdk_wifi_set_carddetect:0 <6>[ 76.198376] mmc1: slot status change detected(1-0) <6>[ 76.198626] mmc1: card 0001 removed <7>[ 76.198713] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1] <4>[ 76.199040] wifi_set_power = 0 <6>[ 76.199064] rk29sdk_wifi_power: 0 <6>[ 76.404007] wifi shut off power <4>[ 77.914149] wifi_set_power = 1 <4>[ 77.914631] wifi_set_power = 1 <6>[ 77.914687] rk29sdk_wifi_power: 1 <6>[ 78.196585] wifi turn on power <4>[ 78.399569] wifi_set_carddetect = 1 <6>[ 78.399606] rk29sdk_wifi_set_carddetect:1 <6>[ 78.399648] mmc1: slot status change detected(0-1) <6>[ 78.399691] rk29_sdmmc_change_clk_div..1935.. newDiv=80, newCLK=300Khz [sdio] <7>[ 78.599628] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1] <6>[ 78.643584] <6>[ 78.643593] mmc_attach_sdio..802.. ===== Begin to identify card as SDIO-card. [mmc1] <7>[ 78.661273] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <7>[ 78.663427] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) <7>[ 78.665554] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) <7>[ 78.669347] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) <7>[ 78.676048] mmc1: queuing unknown CIS tuple 0x80 (14 bytes) <7>[ 78.677757] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <6>[ 78.756624] rk29_sdmmc_change_clk_div..1935.. newDiv=0, newCLK=48000Khz [sdio] <6>[ 78.759973] mmc1: new high speed SDIO card at address 0001 <4>[ 78.762728] <4>[ 78.762739] Dongle Host Driver, version 1.88.2 (r388528) <4>[ 78.762759] Compiled in drivers/net/wireless/bcmdhd on Aug 17 2013 at 22:45:42 <4>[ 78.764003] alloc static buf at d5dc0000! <4>[ 78.764554] dhdsdio_probe : no mutex held. set lock <4>[ 78.782112] wl_create_event_handler thr:7a3 started <4>[ 78.783971] p2p0: P2P Interface Registered <4>[ 78.784092] dhd_attach thr:7a4 started <4>[ 78.784256] dhd_attach thr:7a5 started <4>[ 78.784382] dhd_attach thr:7a6 started <4>[ 78.786211] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 <6>[ 78.786334] mmc_rescan_try_freq..1675.. ===== Initialize SDIO successfully. [mmc1] <4>[ 78.786418] =========== WLAN placed in RESET ======== <4>[ 78.960002] wl_android_wifi_on in <4>[ 78.960038] =========== WLAN going back to live ======== <6>[ 79.308007] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=fe:4d:d4:fc:6d:44 <4>[ 82.177360] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3 <4>[ 82.191435] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3 <6>[ 86.565754] ES8323 4-0010: es8323_off_amp 0 <7>[ 89.779556] wlan0: no IPv6 routers present <7>[ 90.419539] p2p0: no IPv6 routers present <6>[ 100.924834] ES8323 4-0010: es8323_off_amp 1 <6>[ 101.835225] ES8323 4-0010: es8323_off_amp 0 <6>[ 104.862911] ES8323 4-0010: es8323_off_amp 1 <6>[ 105.935016] ES8323 4-0010: es8323_off_amp 0 <6>[ 108.962618] ES8323 4-0010: es8323_off_amp 1 <6>[ 109.144305] ES8323 4-0010: es8323_off_amp 0 <6>[ 113.308026] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 <6>[ 113.322639] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK <4>[ 113.322828] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:c6:3c:2e:6d:b3 <6>[ 113.323095] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH <6>[ 113.328241] cfg80211: Calling CRDA to update world regulatory domain <6>[ 116.444193] ES8323 4-0010: es8323_off_amp 1 <6>[ 116.943523] ES8323 4-0010: es8323_off_amp 0 <6>[ 118.094123] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH <6>[ 118.099425] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev d36b3000 wl->escan_on 1 drv_status 0x0 e_type 69 e_states 4 <6>[ 123.732854] ES8323 4-0010: es8323_off_amp 1 <6>[ 123.867176] ES8323 4-0010: es8323_off_amp 0 <6>[ 126.894728] ES8323 4-0010: es8323_off_amp 1 <6>[ 131.795866] ES8323 4-0010: es8323_off_amp 0 <4>[ 148.008393] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3 <4>[ 148.036372] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3 <6>[ 148.045791] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready <6>[ 148.824822] ES8323 4-0010: es8323_off_amp 1 <6>[ 151.356801] ES8323 4-0010: es8323_off_amp 0 <6>[ 158.290770] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2175 tgid=652 uid=10003 <6>[ 158.836330] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2175 tgid=652 uid=10003 <7>[ 159.439651] wlan0: no IPv6 routers present <6>[ 160.307607] ES8323 4-0010: es8323_off_amp 1 <6>[ 161.436099] ES8323 4-0010: es8323_off_amp 0 <6>[ 165.282289] ES8323 4-0010: es8323_off_amp 1 <6>[ 170.523931] ES8323 4-0010: es8323_off_amp 0 <6>[ 175.547613] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2253 tgid=652 uid=10003 <6>[ 176.082286] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2253 tgid=652 uid=10003 <6>[ 177.618345] ES8323 4-0010: es8323_off_amp 1 <6>[ 195.728408] ES8323 4-0010: es8323_off_amp 0 <6>[ 198.756084] ES8323 4-0010: es8323_off_amp 1 <6>[ 199.669999] ES8323 4-0010: es8323_off_amp 0 <6>[ 202.442397] binder: 375:395 transaction failed 29189, size 144-0 <6>[ 202.697745] ES8323 4-0010: es8323_off_amp 1 <6>[ 222.222852] ES8323 4-0010: es8323_off_amp 0 <3>[ 227.308971] init: untracked pid 2609 exited <6>[ 229.546494] ES8323 4-0010: es8323_off_amp 1 <6>[ 230.671918] ES8323 4-0010: es8323_off_amp 0 <3>[ 231.913417] init: untracked pid 2648 exited <6>[ 250.464157] ES8323 4-0010: es8323_off_amp 1 <6>[ 254.586831] ES8323 4-0010: es8323_off_amp 0 <6>[ 315.827691] ES8323 4-0010: es8323_off_amp 1 <6>[ 325.426466] ES8323 4-0010: es8323_off_amp 0 <6>[ 330.801540] ES8323 4-0010: es8323_off_amp 1 <6>[ 340.472248] ES8323 4-0010: es8323_off_amp 0 <6>[ 343.500174] ES8323 4-0010: es8323_off_amp 1 <6>[ 343.836295] ES8323 4-0010: es8323_off_amp 0 <6>[ 349.232290] ES8323 4-0010: es8323_off_amp 1 <6>[ 349.272861] ES8323 4-0010: es8323_off_amp 0 <6>[ 354.065106] ES8323 4-0010: es8323_off_amp 1 <6>[ 354.755001] ES8323 4-0010: es8323_off_amp 0 <6>[ 357.782795] ES8323 4-0010: es8323_off_amp 1 <6>[ 358.663363] ES8323 4-0010: es8323_off_amp 0 <6>[ 369.237753] ES8323 4-0010: es8323_off_amp 1 <6>[ 371.005259] ES8323 4-0010: es8323_off_amp 0 <6>[ 374.032974] ES8323 4-0010: es8323_off_amp 1 <6>[ 390.885146] ES8323 4-0010: es8323_off_amp 0 <6>[ 393.912703] ES8323 4-0010: es8323_off_amp 1 <6>[ 395.560533] ES8323 4-0010: es8323_off_amp 0 <6>[ 400.770834] ES8323 4-0010: es8323_off_amp 1 <6>[ 518.041620] request_suspend_state: sleep (on->mem) at 517992071686 (2013-10-03 00:29:53.975612557 UTC) <4>[ 518.042253] ft5606_0x74_set_regs OK!! <4>[ 518.079583] lcd_standby... <4>[ 518.362256] net_ratelimit: 11 callbacks suppressed <4>[ 518.362312] dhd_set_suspend: force extra Suspend setting <4>[ 518.379912] rk3188 lcdc0 clk disable... <4>[ 518.384234] dhd_get_suspend_bcn_li_dtim beacon=100 bcn_li_dtim=3 DTIM=1 Listen=10 <6>[ 518.419686] ddrfreq: change auto self refresh to 1 when suspend <6>[ 518.420425] ddrfreq: change freq to 300 MHz when suspend <6>[ 676.795143] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=2969 tgid=652 uid=10003 <6>[ 677.482650] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=2969 tgid=652 uid=10003 <6>[ 698.992414] qtaguid: ctrl_tag(t 70 18446742978492891136 10022): insufficient priv from pid=3181 tgid=652 uid=10003 <6>[ 699.555364] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3181 tgid=652 uid=10003 <6>[ 728.069890] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3352 tgid=652 uid=10003 <6>[ 728.646504] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3352 tgid=652 uid=10003 <6>[ 733.088872] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3434 tgid=652 uid=10003 <6>[ 733.683428] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3434 tgid=652 uid=10003 <6>[ 756.158681] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3499 tgid=652 uid=10003 <6>[ 756.761418] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3499 tgid=652 uid=10003 <4>[ 767.622019] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in <4>[ 767.622087] [rknand_sys_storage_ioctl:251] RKNAND_GET_SN_SECTOR <4>[ 767.622154] [rknand_sys_storage_ioctl:365] return ret = 0 <4>[ 767.622591] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in <4>[ 767.622649] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY <4>[ 767.622703] [rknand_sys_storage_ioctl:365] return ret = 0 <6>[ 768.424134] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3601 tgid=652 uid=10003 <6>[ 768.996989] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3601 tgid=652 uid=10003 <6>[ 785.188728] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3665 tgid=652 uid=10003 <6>[ 785.572698] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3665 tgid=652 uid=10003 <6>[ 791.749119] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3730 tgid=652 uid=10003 <6>[ 792.401335] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3730 tgid=652 uid=10003 <6>[ 824.459052] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3838 tgid=652 uid=10003 <6>[ 824.933702] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3838 tgid=652 uid=10003 <6>[ 862.427383] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3932 tgid=652 uid=10003 <6>[ 863.124303] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3932 tgid=652 uid=10003 <6>[ 909.235706] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4014 tgid=652 uid=10003 <6>[ 909.624404] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4014 tgid=652 uid=10003 <6>[ 914.763688] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4070 tgid=652 uid=10003 <6>[ 915.430432] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4070 tgid=652 uid=10003 <6>[ 933.344422] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4129 tgid=652 uid=10003 <6>[ 934.321278] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4129 tgid=652 uid=10003 <6>[ 941.293945] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4188 tgid=652 uid=10003 <6>[ 941.664889] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4188 tgid=652 uid=10003 <6>[ 957.023383] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4269 tgid=652 uid=10003 <6>[ 958.440278] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4269 tgid=652 uid=10003 <6>[ 970.105018] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4341 tgid=652 uid=10003 <6>[ 970.639367] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4341 tgid=652 uid=10003 <6>[ 1485.941391] request_suspend_state: awake (mem->on) at 1485891844301 (2013-10-03 00:46:01.875385922 UTC) <6>[ 1485.941658] ddrfreq: change auto self refresh to 0 when normal <4>[ 1485.941901] rk3188 lcdc0 clk enable... <6>[ 1485.943483] ddrfreq: change freq to 408 MHz when normal <4>[ 1486.210844] rk3188 lcdc1 clk enable... <4>[ 1486.271001] dhd_set_suspend: Remove extra suspend setting <4>[ 1486.280196] rk3188 lcdc1 clk disable... <6>[ 1487.608026] ES8323 4-0010: es8323_off_amp 0 <6>[ 1491.868955] ES8323 4-0010: es8323_off_amp 1 <6>[ 1492.860564] ES8323 4-0010: es8323_off_amp 0 <6>[ 1498.233155] ES8323 4-0010: es8323_off_amp 1 <6>[ 1502.351141] ES8323 4-0010: es8323_off_amp 0 <6>[ 1506.145754] ES8323 4-0010: es8323_off_amp 1 <6>[ 1510.790682] ES8323 4-0010: es8323_off_amp 0 <6>[ 1524.847780] ES8323 4-0010: es8323_off_amp 1 <6>[ 1524.952117] ES8323 4-0010: es8323_off_amp 0 <6>[ 1543.328864] ES8323 4-0010: es8323_off_amp 1 <6>[ 1556.342176] ES8323 4-0010: es8323_off_amp 0 <6>[ 1562.273111] ES8323 4-0010: es8323_off_amp 1 <6>[ 1565.081540] ES8323 4-0010: es8323_off_amp 0 <6>[ 1568.109019] ES8323 4-0010: es8323_off_amp 1 <6>[ 1584.278375] ES8323 4-0010: es8323_off_amp 0 Edited October 3, 2013 by glossywhite Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now