[KERNEL] [Y300/G510] Stock Huawei

[Guest]

No worries. Those tuneables are optional only. You can keep everything as it is.

[Guest squal]

No worries. Those tuneables are optional only. You can keep everything as it is.

ok tnxs:)

[Guest Jairus1998]

I like the kernel very much. Thanks for your hard work. Need one favor, can you add some governs on you kernel. I would like the interactiveX and Overclocked GPU. 

[Guest Romagnolo1973]

I like the kernel very much. Thanks for your hard work. Need one favor, can you add some governs on you kernel. I would like the interactiveX and Overclocked GPU. 

Difference between Interactive that is included and interactive x are small, plus all this governors was created in the single core era, so now with duble, quad and even octa core they are oldies. better stay in Ondemand

Some test made by modding demonstrate that overclock the gpu decrease the performance so is useless.

 

Modding33k: testing your last nightly, seems good but is realy hard wake up my Y300, it was needed 10 or more push on the on/off button to see the block screen appearing. Governor Ondemand + Deadline

Revert back to 24july version that for me is your best synopsis at the moment

Edited August 18, 2014 by Romagnolo1973

[Guest fonz93]

Well, i had the problem of waking up the phone too, just right now, i couldn't wake up my phone and i had to pull the battery, this is the first time that happened, never had wake up issues, i have activated 60 mb zram and frandom, nothing more

Edited August 18, 2014 by fonz93

[Guest ZolaIII]

Interactive will scale frequency up more aggressive so it could have a small positive effect on performance.

On what build you had walking up problem Fons?

[Guest fonz93]

On what build you had walking up problem Fons?

 

The last moddingg posted

[Guest Romagnolo1973]

Me with last nightly posted in the night and I use AOSP rom, i forgot to mention this.

In addiction to the wakeup problem when i was able to wake up and stay in lookscreen I have a strange issue, the lockscreen disappear slowly with a pulldown black effect untill it was completly black and phone not responding at all.

Just in case this could help

[Guest ZolaIII]

I (we) had wake up problem sometimes with experimental one it took time to wake up bat eventually always did. With last stable one didn't had this problem yet.

Lock screen disappearing act is probably tied to that it didn't wake up & it whose timed to go back in early suspend again...

Edited August 18, 2014 by ZolaIII

[Guest ZolaIII]

Did anyone tried/ tested UKMS with idiotic things like Facebook (or Facebook app)?

Or something like that that uses heap pile of memory.

You can easily monitor KmsZeroPage usage with Performance Control app in memory settings→memory usage.

[Guest Domino2115]

Did anyone tried/ tested UKMS with idiotic things like Facebook (or Facebook app)?

Or something like that that uses heap pile of memory.

You can easily monitor KmsZeroPage usage with Performance Control app in memory settings→memory usage.

U mean facebook messenger too?

[Guest ZolaIII]

Yes one or other. You can monitor & set it up with performance control (UKSM) very nicely. Or something else that eats memory as hell.

[Guest Domino2115]

Yes one or other. You can monitor & set it up with performance control (UKSM) very nicely. Or something else that eats memory as hell.

Thats right?

[Guest spanitzer]

Screenshot_2014-08-18-13-03-12.png Thats right?

Which Rom are you using?

[Guest Domino2115]

Which Rom are you using?

Stock b209 cleaned repack by fonz.

[Guest ZolaIII]

YesYes under that in settings you can see usage & do more tuning of parameters bat skip tuning for now.

[Guest]

I seem to have a "magic ROM" which is fail proof against such issues. I'm always testing the kernel for a while before uploading. :D

Going to take a look when I'm at home.

[Guest fonz93]

Well, because we are all using AOSP MOD, i'll try to use a personal B209 Stock ROM to see if the issues are still there or are causeùd by the ROM part

 

 

Is not suggested to use KSM/UKSM with zRAM or SWAP, right?

Edited August 18, 2014 by fonz93

[Guest]

This combination shouldn't be causing problems. I've both enabled (uksm + zram)

[Guest ZolaIII]

I have UKMS + swap + memorial over commit & using purgeable assets.

Edited August 18, 2014 by ZolaIII

[Guest thetonyxx]

 

 

autonomy ROM?

autonomy, not "autonomy ROM"  :)

 

 

50% battery after 12 days? WTF? 

yes, only 2g no internet, used as an alarm clock in the morning and rare calls :D

[Guest]

Sometimes it's a tough challenge to maintain compatibility across several ROMs, since I don't know what the ROM publishers did do with it.
 
Read this for example: [bUG] Property: persist.sys.ui.hw. There might be a couple more of such stuff which can lead to unpredictable issues.

 

I've just done what most users tend to do: downloaded the kernel ZIP, flashed it on recovery-mode and reboot. Until now I cannot re-produce those described symptoms. The kernel seems to work fine on a B199 "stock ROM" so far.

 

I'd need the help of the ROM dev's for further debugging.

Edited August 18, 2014 by Guest

[Guest]

I like the kernel very much. Thanks for your hard work. Need one favor, can you add some governs on you kernel. I would like the interactiveX and Overclocked GPU. 

 

Most of the governors you might have read about are quite deprecated. They did their job back in the days with the old standard OnDemand governor. But none of them can catch up to the version of OnDemand with integrated updates from current Linux mainline.

 

OnDemandX for example is just a fork of and older original OnDemand version with some minor changes done to it.

[Guest luca020400]

Can i add the new experimental feature ( build.prop ) in the last stable build ??

 

I trie but the rom doesn't start

Edited August 18, 2014 by luca020400

[Guest thetonyxx]

 

 

OnDemandX for example is just a fork of and older original OnDemand version with some minor changes done to it.

in my tablet whit mediatek Soc, original software + root default governator hotplug governetor work nice

is possibile added hotplug for y300?

Edited August 18, 2014 by thetonyxx