LiquidSmooth 3.2, Unofficial and optimized [updated 2014-09-16]

[Guest Ivanhoe6]

You shouldn't make your problem to Mourta's one, mate!

This doesn't even deserve a comment...

[Guest Valdrinit]

Has anyone tried USB or wifi tethering? For me, tethering doesn't work...

 

LE: Also, the actions set in Settings>Lock Screen>Buttons work only for the home button and in Settings>Navigation>App circle sidebar, pressing Included apps resets all the previously selected apps.

 

I did a clean install and also flashed PA Gapps and the latest version of your kernel.

 

I think you are doing an amazing work!

Edited August 23, 2014 by Valdrinit

[Guest Roni Seppänen]

You have to select the tether network since the system default seems to not work. I just put it to 10.210.23.0/24 and atleast wifi tethering works fine, didnt get to test usb yet. Dont know what it actually changes.

[Guest dimi89]

happened twice since i fleshed latest build earlier today. I can almoust reproduce this everytime if i select something to download from market and i start scrolling market when app starta to install on device if i am still scrolling it will freeze market for 5+ secc untill the app is installed and after that i get error.

[Guest Valdrinit]

You have to select the tether network since the system default seems to not work. I just put it to 10.210.23.0/24 and atleast wifi tethering works fine, didnt get to test usb yet. Dont know what it actually changes.

Tried most of the values there, but my laptop doesn't want to connect if I change the network to other than system default. I will try that value too.

 

LE: Still, my laptop was unable to connect to the network. I've just noticed that even though when using system default network and it's saying "Tethering turning on" or something similar, the network is in fact turned on... I just can't use it, because I get disconnected seconds later. USB tethering shows an error no matter what.

Edited August 23, 2014 by Valdrinit

[Guest Gerard Szulc]

I think i found something. 

I am using bt car audio and from time to time when listening to music and disconnecting from some call phone just reboots or hangs on black screen. 

 

@Mourta what logs do you need? i'll try to grab some logs, if I know how to do it

[Guest Gkeko]

twice since i fleshed latest build earlier today. I can almoust reproduce this everytime if i select something to download from market and i start scrolling market when app starta to install on device if i am still scrolling it will freeze market for 5+ secc untill the app is installed and after that i get error.

Clear data, clear cache for play store and it should work

[Guest Mourta]

I think i found something. 

I am using bt car audio and from time to time when listening to music and disconnecting from some call phone just reboots or hangs on black screen. 

 

@Mourta what logs do you need? i'll try to grab some logs, if I know how to do it

 

A logcat from when the error occurs would be great.

 

I have a feeling have already resolved this issue though, i was stupid enough to add code that is updated but doesn't add anything and may cause problems when i built the original dev tree, i have reverted that and it should be fine in the next release which going to come out later today along with a massive kernel update.

 

According to tests... it's the bees knees.

[Guest halldors78]

Havent installed the newest rom but the one before that is working great and also with ART. but im gonna check out the new one but was wondering wich gapps i should use? last time i used Liquid gapps but it got older looks or something from the gapps i used before that. i thinking about using gapps micro. and i have been using kk launcher and it works great now, used to have some bugs.   

and do you know if skype or qr code workd now?

but other then that thanks for the great work, the best rom out there

[Guest Ivanhoe6]

Havent installed the newest rom but the one before that is working great and also with ART. but im gonna check out the new one but was wondering wich gapps i should use? last time i used Liquid gapps but it got older looks or something from the gapps i used before that. i thinking about using gapps micro. and i have been using kk launcher and it works great now, used to have some bugs.   

and do you know if skype or qr code workd now?

but other then that thanks for the great work, the best rom out there

Use PA gapps 4.4.4 mini or micro whichever You prefer

[Guest Donar81]

Havent installed the newest rom but the one before that is working great and also with ART. but im gonna check out the new one but was wondering wich gapps i should use? last time i used Liquid gapps but it got older looks or something from the gapps i used before that. i thinking about using gapps micro. and i have been using kk launcher and it works great now, used to have some bugs.   

and do you know if skype or qr code workd now?

but other then that thanks for the great work, the best rom out there

Banks gapps also working great.

I use the minimal gapps because i only need the playstore

 

https://s.basketbuild.com/devs/BaNkS/GApps/4.4.4/

[Guest halldors78]

same here usually only use playstore then memory is filled up with the play services, used to use goggles sometimes but it doesnt work when qr code doesnt. have been using habit browser now and puffin and javelin before that so no chrome here either. thanx

[Guest halldors78]

but whats the difference between banks and normal gapps?  the gapps i used looked very nice and new, but liquid gapps had the old look

[Guest tool_king]

Banks gapps also working great.

I use the minimal gapps because i only need the playstore

https://s.basketbuild.com/devs/BaNkS/GApps/4.4.4/

+1

[Guest dimi89]

Tested 17th version and i can say abyssplug2 is ok with ocasional lag - interactive governor is bugged as badword since 7/10 times i cant wake up device from deepsleep - ondemand is working best at least for me.Camera is great  speaker volume is kinda low (idk how to set up Viper sound sistem since for me it is ever worst when i turn it on) in call volume is ok (could be louder but i hear fine people and they didnt report any problems hearing me).Going to try new build and report.Also battery time is average for me Android system and android OS are a bit high since i am a lot in areas with bad recaption and still my cell standby is 4rth on the list (usually it is 2-3 since i forget to switch to 2G and stop the drain).Thx for this rom.Also @mourta you didnt replay anything to problem that i mentioned before about market crash.Also i think it is related to cpu governor since on ondemand i dont have it.

[Guest halldors78]

viper makes the sound many times better, im using rocket player now with it because of the ui, but Neutron is probably best but you need some time to set it up

[Guest Mourta]

Tested 17th version and i can say abyssplug2 is ok with ocasional lag - interactive governor is bugged as badword since 7/10 times i cant wake up device from deepsleep - ondemand is working best at least for me.Camera is great  speaker volume is kinda low (idk how to set up Viper sound sistem since for me it is ever worst when i turn it on) in call volume is ok (could be louder but i hear fine people and they didnt report any problems hearing me).Going to try new build and report.Also battery time is average for me Android system and android OS are a bit high since i am a lot in areas with bad recaption and still my cell standby is 4rth on the list (usually it is 2-3 since i forget to switch to 2G and stop the drain).Thx for this rom.Also @mourta you didnt replay anything to problem that i mentioned before about market crash.Also i think it is related to cpu governor since on ondemand i dont have it.

 

Interactive is in need of updating. I changed the entire cpufreq interface and interactive needs to be updated to the same level.

 

Abyssplug2 works great for me.

 

Regarding the equalizer, if you scroll to the bottom you'll see the option for boosting output volumes, you can raise it quite a bit.

 

The new ROM should be a lot better when it comes to the baseband wakelocks, i tested undervolting it but that doesn't really work (the signal in low signal areas drops completely).

 

I can't reproduce your problem with the market crash, i've never had that problem. I'm using the latest PA zero day gapps package and everything is updated to the latest in play. It might be another app that's causing it, you can try cleaning out the cache (which should be done with the update anyway, wipe dalvik and cache on ever install even if it's not really needed).

[Guest Donar81]

but whats the difference between banks and normal gapps?  the gapps i used looked very nice and new, but liquid gapps had the old look

Banks gaps has the lastest google apps like pa 0day gaps

But the minimal gapps contains only playstore and thw needed api's

[Guest Gkeko]

Havent installed the newest rom but the one before that is working great and also with ART. but im gonna check out the new one but was wondering wich gapps i should use? last time i used Liquid gapps but it got older looks or something from the gapps i used before that. i thinking about using gapps micro. and i have been using kk launcher and it works great now, used to have some bugs.   

 

i dont have any problems with this gapps. 0day gapps:

http://forum.xda-developers.com/showthread.php?t=2397942

[Guest dimi89]

When first starting Viper it gave me choice to pick if i want battery friendly medium or high quality what should i choose.Also that option you were talking about @mourta i know it but it doenst make any difference in speaker volume it doesnt increase it at least for me.Write your cpu governor - i/o scheduler so i can perdonaly test what is working for you and report.As o sad only on ondemand i dint have any issues.

[Guest tool_king]

When first starting Viper it gave me choice to pick if i want battery friendly medium or high quality what should i choose.Also that option you were talking about @mourta i know it but it doenst make any difference in speaker volume it doesnt increase it at least for me.Write your cpu governor - i/o scheduler so i can perdonaly test what is working for you and report.As o sad only on ondemand i dint have any issues.

Mourta recommends to use abyssplug2 and row. Why not try to read the OP before asking?

[Guest Mourta]

When first starting Viper it gave me choice to pick if i want battery friendly medium or high quality what should i choose.Also that option you were talking about @mourta i know it but it doenst make any difference in speaker volume it doesnt increase it at least for me.Write your cpu governor - i/o scheduler so i can perdonaly test what is working for you and report.As o sad only on ondemand i dint have any issues.

 

First of all, as tool_king said, read the OP.

 

Secondly, questions go in the questions thread. For viper, change the ui setting to moderate and set the db gain to whatever volume you need, it starts sounding like crap after 3.5.

[Guest Gkeko]

Mourta-LS-KK-v3.2-2014-08-22-p880.zip

 

Install, let it boot, enter kernel tweaker and set intelliplug to boot by default, reboot and you are on your way.

 

I'm not going to go one by one for all the chanes here, it's a MASSIVE update, moving from cpuquiet to intelliplug is just a small part.

 

So what to set:

Governor: abyssplugv2 or intelliactive?

TCP Congestion control: westwood or cubic (as it was before)

I/O Scheduler: row (i supose)

 

[Guest tool_king]

So what to set:

Governor: abyssplugv2 or intelliactive?

TCP Congestion control: westwood or cubic (as it was before)

I/O Scheduler: row (i supose)

 

abyssplugv2 as governor, row as scheduler, westwood and intelliplug (under Tweaks)

[Guest Ivanhoe6]

So what to set:

Governor: abyssplugv2 or intelliactive?

TCP Congestion control: westwood or cubic (as it was before)

I/O Scheduler: row (i supose)

 

Governor: abyssplugv2

TCP Congestion control: westwood

I/O Scheduler: row