Help huawei y300-0100 bricked

[Guest gireeshbabuv]

Its hard to explain what happened to my phone.i can't add any new data most of the apps doesn't work the ones that opens suddenly stops no changes can be made to anything its like i'm in some kind of loop.

I tried wipeing data,cache partition,dalvik cache,formating everything in cwm recovery it shows wiped but when i power on the phone nothing happened everything is like it was before the wipe.

I had set external sd as internal in slimkat settings(i couldn't change that too).

[Guest gireeshbabuv]

Device name:ascend y300

codename:u8833

rom:slimkat-u8833-4.4.4.build.9.0.20141229-chil360

recovery:CWM-based Recovery v6.0.4.5

[Guest gireeshbabuv]

And it also shows

E:unknown volume for path[/sd-ext]

and on trying to flash the same rom again it shows set_metadata_recursive: some changes failed

E:error in <path of file>

(Status 7)

installation aborted

Edited April 2, 2015 by gireeshbabuv

[Guest killadroid]

why don't use u use twrp?

[Guest gireeshbabuv]

Could you please find me twrp which can be flashed through cwm? i think i have no other way to install it now

[Guest killadroid]

here flash it https://www.dropbox.com/s/aagbuc6uo6bnawp/TWRP_2.6.3.3-Y300-signed.zip?dl=1 it's twrp 2.6.3.3 I would advice u to flash another rom too

[Guest gireeshbabuv]

Nothing happened i think something is wrong with the cwm too :-( is there anything else i can do

[Guest gireeshbabuv]

I tried flashing cwm and twrp in fastbootmode as i installed cwm for first time it says flashed and still nothing

[Guest killadroid]

I'm sorry I can't help you

[Guest gireeshbabuv]

Its ok thanks for replying :-)

[Guest gireeshbabuv]

I tried to go into purple mode but it said update exception emmc is read only do you know what that means

Edited April 6, 2015 by gireeshbabuv

[Guest killadroid]

u mean fast boot mode? i don't know what that means.u should take it to a phone repair shop or try to reflash stock rom

[Guest gireeshbabuv]

I was trying to flash stock rom purple mode is the mode you get when you press vol + and vol - keys and power button together.

[Guest Arbab Irfan]

You can revert back to huawei stock rom.  power+volumeup+volumedown

http://www.modaco.co...in-to-recovery/

[Guest gireeshbabuv]

You can revert back to huawei stock rom. power+volumeup+volumedown

http://www.modaco.co...in-to-recovery/

i can't do that.

It shows an update exception that emmc is read only. That is, internal memory is read only so no changes can be made.

[Guest Arbab Irfan]

i can't do that.

It shows an update exception that emmc is read only. That is, internal memory is read only so no changes can be made.

you really tired that dload method.

[Guest gireeshbabuv]

you really tired that dload method.

yup,i already tried that.

It shows,

update exception

emmc is read only you can't update your system.

And i think if i am able to fix that error my phone would be back to normal.

Edited April 15, 2015 by gireeshbabuv

[Guest Arbab Irfan]

try again to flash recovery with Kra1o5 script...single click ..  bat file ... set the phone on pink screen connect to PC make sure driver are updated, and also check ADB command that it is showing is devices.... then run Kar1o5 script...

I had issue i was unable to flash recovery.. my recovery was messed up... then i used Kar1o5 script to flash CWM recovery... and that worked for me.

I read some blogs about it and it said...!

"the H-JTAG application and a way to connect to my PC LPT cable coming from the phone, as I find contacts and denomination (pinout) in cell plate, welding cable and read the memory?"

 

here is the link http://forum.gsmhosting.com/vbb/f664/huawei-y300-0100-error033-1849065/index3.html

Edited April 17, 2015 by Arbab Irfan

[Guest gireeshbabuv]

Can you post the link to kar1o5 script

Edited April 22, 2015 by gireeshbabuv

[Guest Arbab Irfan]

Good Luck

 

https://s.basketbuil....7.1.0-Y300.zip

[Guest gireeshbabuv]

That didn't work either

[Guest alexsandra]

is there any update about your phone? bc i got the same problem :(