Guest PaulOBrien Posted September 25, 2015 Report Posted September 25, 2015 Xiaomi might be most famous for their Mi range of phones and the MIUI user interface that sits on them, but they also have a number of other products on sale. We've previously raved about the Piston headphones and now we've got our hands on the Xiao Yi 'small ants' Smart camera, a home IP camera that's available for import for just £20 (and that's for the deluxe model!). Is this another Xiaomi triumph or a bargain too far? Read on to find out!Where to buyTwo models of the camera are available, with and without IR night vision, but to be honest, you should probably go for the better version, which is what I have here.The camera is available from a host of sellers on AliExpress (where this one was purchased), but is also available from the GearBest EU warehouse, priced at £21.67 including delivery. HardwareIn the beautifully presented box you'll find the camera, a 2m white microUSB cable and a 1A mains charger (with US charging pins - an adaptor was provided by my seller), although the device never pulls more than 0.5A even when the IR LEDs are illuminated (it'd probably run well from a battery bank if needed).The camera is mounted such that the (rubberised) base can be used as a stand or as a wall mount. The camera itself has a speaker, microphone, microSD slot for local video storage and (on the night vision version) 8 x 940nm (invisible to humans and pets) IR LEDs around the 1280x720, F2.0, with 111° all-glass wide-angle lens (92.7° horizontal, 48.7° vertical coverage). A reset hole can be found on the back to restore the device to factory defaults.The camera runs on the Hi3518 chipset and supports adaptive rate streaming.InstallationSetting up the camera is surprisingly easy. Simply...sign up for a Xiaomi account (this allows you to sync your camera setup easily between devices)download and install the Android app from this linklaunch the application and step through the wizard - select the QR code optionenter your WiFi credentials and a QR code will be createdinsert the microUSB cable into the camerawhen you hear a voice prompt from the camera (in Chinese), hold your phone with the QR code in front the camera until it beeps - the flashing blue LED will become solidthat's it - you're set upPretty simple eh? The first time you connect you will likely be prompted to update the firmware on the camera, this is a quick and automated process.SoftwareAs linked above, the camera application is a manual APK install and isn't available from the Play Store. It's not a big issue though as the application self-updates, so you will always have the latest version.Although the application does have a smattering of Chinese, everywhere that matters, the content is in English. It's completely usable - and it's actually a pretty cool app. Features include...support for multiple camerasphoto and video album for saved contentbuilt in storehelp and feedback pagedata usage loggingmanual update checkinghardware decoding togglepush message loglive view over local wifi or mobile data with full screen view and pinch-zoomsnapshot and video recordingtwo way audioscrollable event timelinecamera name configurationcamera status light togglecamera wifi settingscamera firmware updatecamera PIN protectionmotion alert toggle, alert schedule and settingsmicroSD configurationAs you can see, it's a pretty fully featured app, but it still remains intuitive and easy to use. The only notable omissions for me are detection zone configuration for the motion detection, the ability to configure a time zone and an option to disable the IR LEDS - the fact this is missing means it's not possible to use the camera at night in front of a window, due to reflections. In useWatching the video stream at home and remotelyWatching video from the camera is very easy, provided you are on your phone. The application supports SD, HD and Automatic stream qualities either in a window or in landscape full screen mode. When viewing the stream, date, time and data rate are displayed. Below the screen sits a timeline, which has motion events indicated by coloured bars. You can scroll the timeline to view those events. From the stream view you can record video (locally), take a still image (locally), enable / disable sound and even press a microphone button to talk to the remote location using the speaker built in to the device. It all works very well.If you are NOT on your phone, things are more tricky - there is no PC based viewer, unless you use the hacks below to enable the RTSP stream. If you do enable RTSP, they are unsecured, so you probably don't want to expose these outside of your home network!I connect to the camera using RTSP from VLC and it works fine - for viewing outside of my home network and not on my phone, I have my router set up to receive VPN connections, which effectively puts me onto the internal home network. Not an ideal solution however.Because of the wide angle of view, the image does have some 'fish eye' affect at the edges - I wonder if this could / should be removed in software. It's not a huge problem though. Receiving motion detection alertsThe camera has motion detection software built in - when enabled, a motion event will trigger recording to the microSD card inserted into the device (not supplied). It will also trigger a push alert to your mobile device (the popup appears in Chinese, but that does't really matter). You can then launch the app, watch the motion event footage remotely, and even 'record it' to your local device if required. This isn't necessarily an ideal solution if you want to use the camera for home security purposes of course, as if someone steals the camera, they have then stolen the footage too.If you have a Xiaomi router in your home, you can use that as remote NAS storage for the camera, mitigating that problem a little (and hey, Xiaomi routers are super-cheap too). Night visionThe 8 IR LEDs on the camera are arrange in a circular layout around the camera in such a way as to distribute light across the whole viewable area. The net result? They work very well (with the aforementioned caveat that it's unfortunate you can't turn them off if needed). The switching process is completely automatic and in my experience so far, the software seems to get the cut-over point just right.Time zone issuesOut of the box the camera is configured to the Beijing time zone and there is no option to change this in the software. A bit annoying! Instead you need to use the hack below to specify an alternate time zone, as a differential to the default. A bit of a nuisance, but at least you can change it. Until you do, the app gets very confused scrolling through the motion detection timeline.HackingStrangely, there were some features in early versions of the camera firmware that didn't make it to the latest releases - HTTP access (including browser access to the SD card), RTSP streams, telnet access to the underlying Linux OS and FTP access. There's also that one major missing feature - the ability to set the timezone. Thankfully, you can hack all these features back in, really easily!The process is simply...Download the archive from RobinHennigesExtract the archiveEdit the equip_test.sh file to set the current software version and your preferred timezoneCopy the contents to a microSDUnplug the cameraInsert the microSDConnect the camera (it will boot using the scripts on the SD card)And that's it! You'll now have RTSP streams at the following URLs... rtsp://<ipaddr>:554/ch0_0.h264 [HD] rtsp://<ipaddr>:554/ch0_1.h264 [SD]...as well as telnet and FTP access with the credentials root / 1234qwer (the password can be changed using the passwd command). With a cron script on a server hooking up to the camera via FTP, this could provide an alternative method for storing video away from the microSD card.Pros and consWe like...Super-cheapBetter looking than most IP camerasGood performanceHackableRegular software updates (par for the course from Xiaomi happily)We don't like...It'd be nice to lose the last few remaining bits of Chinese from the companion appIt shouldn't be necessary to hack the device to put features back (especially RTSP)No way to password protect RTSP streams (e.g. for use with Tinycam for example)VerdictThe Xiao Yi 'small ants' camera is a great little camera.It's probably not going to be the center-piece of an advanced home security system, but for keeping an eye on things when you're not in the same room / house, it works well. It would be harder to recommend were it more pricey due to its few quirks, but at £20 it's a positive steal.Add in the fact that it's also a rather nice looking piece of tech and it's a great buy. Recommended. View full item
Guest bewA Posted September 25, 2015 Report Posted September 25, 2015 Nice review! My question is this! :)What is the image quality like if pointed outside through a window at night?
Guest PaulOBrien Posted September 25, 2015 Report Posted September 25, 2015 Nice review! My question is this! :)What is the image quality like if pointed outside through a window at night?Terrible - you'll just get the reflection of the IR LEDs.P
Guest Alex (nedge2k) Posted September 25, 2015 Report Posted September 25, 2015 When wall mounted, is there enough clearance to rotate the cam left/right whilst keeping it vertical?
Guest PaulOBrien Posted September 25, 2015 Report Posted September 25, 2015 When wall mounted, is there enough clearance to rotate the cam left/right whilst keeping it vertical?There is no rotation on the mount...P
Guest Alex (nedge2k) Posted September 25, 2015 Report Posted September 25, 2015 There is no rotation on the mount...PNot ideal for mounting on a wall and trying to capture a wide angle then! :( Suppose you could mount it to a 45° cut block of wood and mount that up in a corner tho.
Guest Abnormal1 Posted September 25, 2015 Report Posted September 25, 2015 Could it be used outside? Is it water or weather proof?
Guest PaulOBrien Posted September 25, 2015 Report Posted September 25, 2015 Could it be used outside? Is it water or weather proof?No...P
Guest theShire Posted September 28, 2015 Report Posted September 28, 2015 I'm unable to log into the app. I just get a spinning circle after permitting the camera access my mi account. Anyone else having similar issues?
Guest minty1978 Posted September 28, 2015 Report Posted September 28, 2015 I am getting the same problem currently @theShire hopefully it is just a temporary issue with the server. I'll try again in the morning..
Guest theShire Posted September 28, 2015 Report Posted September 28, 2015 I am getting the same problem currently @theShire hopefully it is just a temporary issue with the server. I'll try again in the morning..i tried the app on my hudl tablet and had the QR code option but it didn't work either. The QR option doesn't appear when I use the app on my phone
Guest PabUK Posted September 28, 2015 Report Posted September 28, 2015 You mentioned Tinycam in your cons list - did you mean it doesn't work with Tinycam at all? I can live without password protection but would need Tinycam to work.
Guest minty1978 Posted September 29, 2015 Report Posted September 29, 2015 I've tried both QR and normal options on both Android and iPhone. Nothing happens, just a flashing orange light on the front. Any ideas?
Guest Alex (nedge2k) Posted September 29, 2015 Report Posted September 29, 2015 Mine just arrived, whole process went smooth as silk :) (not to rub it in of course :P )
Guest jamoiholland Posted September 29, 2015 Report Posted September 29, 2015 Mine arrived today. I can login to the app ok (had a Xiaomi account already in case that helped).However, the camera light for me goes from orange flashing to blue flashing, but never blue solid to confirm the QR code was scanned ok. How does the non-QR option ("WiFi Config") work? I get the "Search Camera" screen with animated circles and a 100 second countdown timer, nothing happened... Somehow I missed the bit about not using 5Ghz wifi. The QR code now works and the blue light went solid. Took a few minutes after that, then the camera showed up in the app, and the camera firmware is now updating...and it's now all online! :-)
Guest theShire Posted September 29, 2015 Report Posted September 29, 2015 I retried the setup this evening from my hudl tablet and got it all working. A bit awkward working with the Chinese voice prompts but it worked in the end. Once it was setup via the tablet I was then able to use the app on multiple phonesphones to view the camera feed using the same xiaomi account. Great picture quality
Guest theShire Posted September 29, 2015 Report Posted September 29, 2015 i tried the app on my hudl tablet and had the QR code option but it didn't work either. The QR option doesn't appear when I use the app on my phonei managed to set up the camera using the app on my hudl this evening. Slightly awkward with the Chinese voice prompts but managed it in the end. Once setup properly with the tablet I was able to use the app on multiple phones and the same xiaomi account instantly.Great camera, very good quality, great price
Guest lipilee Posted October 14, 2015 Report Posted October 14, 2015 am I correct in thinking this is a sponsored article? I bought one of these devices and my experience is basically the opposite of what's written here. and I haven't even set it up successfully :)
Guest griff2 Posted October 26, 2015 Report Posted October 26, 2015 (edited) Camera refuses to read QR code, don't understand Chinese and with no option of a good old fashioned network configuration via a cable camera is a complete waste of money.Update, got it working now. Didn't need the QR method, just entered the Wi-Fi password and was away. Edited October 31, 2015 by griff2 Got the camera to work.
Guest kicko2 Posted December 2, 2015 Report Posted December 2, 2015 I would like to hear if somebody has the same experience with the app. I find it almost impossible to selectively watch past footage. When I scroll back to a specific time it never starts playing from this moment. It always starts from some other place hours before that. It feels like it always wants to show me the video from the beginning of this same day that is marked as "unwatched" or something... So if I have multiple movement alerts in a day, I can't watch the last one until I sit and watch all of them.
Guest PaulOBrien Posted December 2, 2015 Report Posted December 2, 2015 This is related to the time zone on the camera being different from that on your phone I think @kicko2... P
Guest PaulOBrien Posted December 2, 2015 Report Posted December 2, 2015 On 10/14/2015, 7:40:18, lipilee said: am I correct in thinking this is a sponsored article? I bought one of these devices and my experience is basically the opposite of what's written here. and I haven't even set it up successfully :) No, not at all, bought with my own money and I think it's awesome! What problems are you having? P
Guest mario999 Posted December 3, 2015 Report Posted December 3, 2015 Im trying to set the time error on the camera. I've altered the equip_test.sh file to GMT+5 and altered the version number. Do I now just place the 'test' folder in the root of the SD card? There is a 'home' file in the downloaded archive, does this need to replace the home file already in the SD card? Then just put the SD card back in the cam and boot. Is this correct? One final question, I have the none IR version of the camera. Will the above method work for my camera also? Any help appreciated.
Guest mario999 Posted December 4, 2015 Report Posted December 4, 2015 Anyone done the above and got it to work? The timeline fault is driving me crazy. Just not sure which files exactly to swap.
Guest PaulOBrien Posted December 4, 2015 Report Posted December 4, 2015 21 hours ago, mario999 said: Im trying to set the time error on the camera. I've altered the equip_test.sh file to GMT+5 and altered the version number. Do I now just place the 'test' folder in the root of the SD card? There is a 'home' file in the downloaded archive, does this need to replace the home file already in the SD card? Then just put the SD card back in the cam and boot. Is this correct? One final question, I have the none IR version of the camera. Will the above method work for my camera also? Any help appreciated. Wipe the SD card and put everything from the zip on it! It works on both versions of the camera AFAIK. P
Recommended Posts