Guest mario999 Posted December 4, 2015 Report Posted December 4, 2015 59 minutes ago, PaulOBrien said: Wipe the SD card and put everything from the zip on it! It works on both versions of the camera AFAIK. P Thanks, time now correct but doesnt fix the timeline problem. Can't scan through time, always snaps back to the current time on searching. Shame, its a great little camera.
Guest kicko2 Posted December 9, 2015 Report Posted December 9, 2015 I think I broke it with this 'equip_test.sh' script. It was totally my fault. I wanted only the timezone fix, so I tried to comment out the sections about the telnet and RTSP. After I put the card in the camera and powered it up, it entered endless reboot cycle. Then I tried pressing the reset for 10 seconds but that didn't help. Next thing I tried was to start without the SD card - it goes into "constant yellow blink" mode and nothing happens. Then I tried replacing the files on the SD card with the contents of the ZIP archive, overwriting the old ones and now I don't remember what was the software version that I had to put in the script. Only remember it was the M version, the update came just before I started experimenting. I tried booting without changing anything in the file, but that didn't help, it doesn't go into constant reboot mode, but it just sits there with the yellow LED on and nothing happens. Any ideas how to bring it back to life? Edit: Ah, never mind, I fixed it by flashing the firmware following the instructions on 4pda.ru
Guest goatee Posted February 2, 2016 Report Posted February 2, 2016 This does look like a nice camera, but do you have any recommendations for other budget IP cameras which will upload recorded content via FTP / Dropbox / Google etc so they can be used for security?
Guest cool400 Posted March 11, 2016 Report Posted March 11, 2016 Unfortunately this hack doesn't work on the V2.1-version of the camera. The version number is printed on the box, BTW. For that version you should use the firmware and script from here: http://xiaoyi.querex.be/ Any further instructions or hints are more than welcome!
Guest Jinjur Posted April 11, 2016 Report Posted April 11, 2016 got mine and plugged it in....bit of a faff with the software but got there with the chinese one prompted for firmware upgrade and now I am getting "this camera can only be used within china" message from camera and "camera turned off" message in the app :( Any thoughts guys? A
Guest Jinjur Posted April 11, 2016 Report Posted April 11, 2016 ok......flashed one of the firmware files manually and back online quick question.....can anyone see how to set the activity monitoring area? it seems to be mentioned online etc but i cannot see anywhere to define it? J
Guest dmac2007 Posted April 13, 2016 Report Posted April 13, 2016 On 10/03/2016 at 9:47 AM, cool400 said: Unfortunately this hack doesn't work on the V2.1-version of the camera. The version number is printed on the box, BTW. For that version you should use the firmware and script from here: http://xiaoyi.querex.be/ Any further instructions or hints are more than welcome! Thanks for that mate, got the 2.1 version hardware and was trying and trying this with no luck, so used the files from http://xiaoyi.querex.be. Problem for me is I ALWAYS get "Camera turned off". I set it on via the app, and make sure the cam is on, but always get this. I've the CN 2.1 hardware version, really dono what to do now. Any ideas guys?
Guest ThienC Posted April 16, 2016 Report Posted April 16, 2016 You should use only version L, not M. Starting from M the camera will be turned off outsied China
Guest rosymalhotra Posted September 6, 2016 Report Posted September 6, 2016 Just amazed so much to explore more and more info about New Xiomi Camera for PC and Laptops. Nice information and i appreciate this. Independent Escorts in Delhi
Recommended Posts