Guest nutsda Posted September 4, 2017 Report Posted September 4, 2017 (edited) Disclaimer I'm am not responsible for bricked devices, flashing custom ROM's/Recovery's is done so at YOUR OWN RISK!Information This is a standard Lineage build without any extras & compiled with stock SU6 6.0.1 kernelDownloadhttp://www.mediafire.com/file/n55eth5yidbos5c/lineage-13.0-20171007-UNOFFICIAL-p839v55.zip Installation I recommend doing a full wipe before flashing! Flash ROM using TWRP Flash GAPPS 6.0 arm package of your choice Reboot & wait for Android to boot Please note that if you wish to have root access you will have to install SuperSU systemless! Version InformationStatus BetaROM OS 6.0.1 MarshmallowROM Kernel 3.10.49Created 2017-08-24Updated 2017-10-07 Thanks goes out to @wbrambley for his involvement in testing & helping to solve / fix bugs! Edited October 8, 2017 by nutsda
Guest PixelFlops Posted September 4, 2017 Report Posted September 4, 2017 Hi there. I've flashed the ROM and tried it out for a few hours.The initial experience was fairly positive and things were relatively normal. I would use this as my normal ROM if: (from what I experienced) There wasn't a lag from turning the screen on. For some reason the ambient sensor turns on even with the detection setting turned off. It blinks twice before turning on but it does not always turn on the first try. Had root. This is important in a lot of tasks I do, including restoring the backup of my existing build. Otherwise most of the things are alright. I've also noticed a bit of lag when hanging up on calls sometimes. This ROM is still a WIP so there's a lot of room for improvement. I would like to use Lineage OS and will use it once its stable enough. Thanks, Saabiq.
Guest nutsda Posted September 4, 2017 Report Posted September 4, 2017 3 hours ago, PixelFlops said: Hi there. I've flashed the ROM and tried it out for a few hours.The initial experience was fairly positive and things were relatively normal. I would use this as my normal ROM if: (from what I experienced) There wasn't a lag from turning the screen on. For some reason the ambient sensor turns on even with the detection setting turned off. It blinks twice before turning on but it does not always turn on the first try. Had root. This is important in a lot of tasks I do, including restoring the backup of my existing build. Otherwise most of the things are alright. I've also noticed a bit of lag when hanging up on calls sometimes. This ROM is still a WIP so there's a lot of room for improvement. I would like to use Lineage OS and will use it once its stable enough. Thanks, Saabiq. The sensor issue I hope to have fixed in the near future, as for root Lineage doesn't have built in root access but root can be obtained by installing SuperSU systemless root.
Guest PixelFlops Posted September 5, 2017 Report Posted September 5, 2017 The sensor issue I hope to have fixed in the near future, as for root Lineage doesn't have built in root access but root can be obtained by installing SuperSU systemless root. Cool thanks
Guest nutsda Posted September 6, 2017 Report Posted September 6, 2017 Update has been uploaded http://www.mediafire.com/file/v5m8keoadkwkaz2/lineage-13.0-20170906-UNOFFICIAL-p839v55.zip Sensors now working properly, also improved boot up time.
Guest AGENTU007 Posted September 7, 2017 Report Posted September 7, 2017 Hello. rum is not good, after installing it i installed gapps, and pass all the settings i say the pixel launcher stopped and then can not do anything on the phone
Guest nutsda Posted September 7, 2017 Report Posted September 7, 2017 1 hour ago, AGENTU007 said: Hello. rum is not good, after installing it i installed gapps, and pass all the settings i say the pixel launcher stopped and then can not do anything on the phone Did you install gapps at the same time as the ROM or after the first boot? Also did you clean install as in wiping data, system & cache?
Guest AGENTU007 Posted September 7, 2017 Report Posted September 7, 2017 sure you do after I deleted the wiping data, system & cache I installed the rom and after installing the rom we installed gapps with rom and after we reboot the phone
Guest AGENTU007 Posted September 7, 2017 Report Posted September 7, 2017 I noticed that if I do not install gapps it starts faster and there are no more conflicts but without google play what do I do?
Guest nutsda Posted September 8, 2017 Report Posted September 8, 2017 3 hours ago, AGENTU007 said: I noticed that if I do not install gapps it starts faster and there are no more conflicts but without google play what do I do? What version of gapps are you using?
Guest AGENTU007 Posted September 8, 2017 Report Posted September 8, 2017 and after passing all the settings, I finally reach a window where he tells me, to wait a second, .. then just one second is not that it takes at least an hour and that's not the end of that line crossing from one end to the other at all, and I can not do anything on the phone, what is to be done? thank you, I'm waiting for an answer.
Guest AGENTU007 Posted September 8, 2017 Report Posted September 8, 2017 open_gapps-arm-6.0-stock-20170907
Guest AGENTU007 Posted September 8, 2017 Report Posted September 8, 2017 (edited) http://opengapps.org/ that's where I downloaded it Edited September 8, 2017 by AGENTU007
Guest AGENTU007 Posted September 8, 2017 Report Posted September 8, 2017 that's where I downloaded it
Guest Odour Fone Posted September 8, 2017 Report Posted September 8, 2017 (edited) @AGENTU007 In this order: From recovery wipe data factory reset. Install ROM, Don't install gapps after. Reboot, don't enable WiFi or data in setup. Skip setup options untill you can get to your home screen. Reboot to recovery then install gapps pico. Before you reboot to OS wipe dalvic cache. I noticed that it takes 2 reboots after GAPPS flash to fully install the gapps package. Edit* I can confirm that this works on this ROM. After gapps initial boot, settings stopped but auto relaunched fine. Edited September 9, 2017 by Odour Fone
Guest MettyHall Posted September 8, 2017 Report Posted September 8, 2017 hello! sorry if my english is not perfect,i'm italian. the rom have some bugs and for now is very unstable. apart from that this rom have a very big potential;) the bugs are these : 1) the stock launcher crash when i try to install another launcher (nova launcher), and after crash the whole system. 2)apps like whatsapp and instagram for example are incompatible when i can try to install they in the playstore!!!!very strange thing... so for now i noticed these bugs, but certainly there will be others...
Guest kwnstantinos pattas Posted September 9, 2017 Report Posted September 9, 2017 Ελληνας εισαι αγορινα ?
Guest AGENTU007 Posted September 9, 2017 Report Posted September 9, 2017 19 hours ago, Odour Fone said: @AGENTU007 Thanks for the advice, I will try the variant you said to me, I wish you a nice day
Guest AGENTU007 Posted September 9, 2017 Report Posted September 9, 2017 where do I download the gapps pico?
Guest nutsda Posted September 9, 2017 Report Posted September 9, 2017 50 minutes ago, AGENTU007 said: where do I download the gapps pico? You download it from the same place you got stock gapps but in the 3rd column (variant) choose pico.
Guest Odour Fone Posted September 9, 2017 Report Posted September 9, 2017 (edited) 21 hours ago, AGENTU007 said: where do I download the gapps pico? http://opengapps.org/ Select -arm not the arm 64bit version Select 6.0 Select pico second from bottom on the right. This ROM is still in beta so you may find other issues. You are basically helping to test it by installing. :) Edited September 10, 2017 by Odour Fone
Guest AGENTU007 Posted September 9, 2017 Report Posted September 9, 2017 53 minutes ago, nutsda said: You download it from the same place you got stock gapps but in the 3rd column (variant) choose pico. THANK YOU
Guest AGENTU007 Posted September 9, 2017 Report Posted September 9, 2017 39 minutes ago, Odour Fone said: http://opengapps.org/ Select -arm not the arm 64bit version Select 6.0 Select pico second from bottom on the right. This ROM is still in beta so you may find other issues. You are basically helping to test it by installing. :) Nutsda types much faster than me^^^^ THANK YOU
Guest AGENTU007 Posted September 10, 2017 Report Posted September 10, 2017 (edited) Hi, I managed to install the system, run fluent, with some errors that I think will resolve, thank you. Edited September 10, 2017 by AGENTU007
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now