126 replies to this topic

[injectie]

how do you fixed this problem becouse i have the same problem too?

crisorlando, on 30 November 2011 - 12:11 PM, said:

Hello

I used it to recover my cell

And flashed v10b stock again, and even tried with v20l

And now touch does not work at all

What am I doing wrong ?

Or there is another step to recover touch stuff ?

I know some chinese tablets, that have some enviroment part about touch screen, resolutions... but with that cell I don´t know what went wrong

[Koocha]

Hi, hoping someone can help me out.

I flashed the 725 baseband and everything was fine for a couple of days, then I rebooted by phone and "baseband unknown".

I'm trying the NVFlash method to get it back to stock and work from there, but I'm having a problem:

C:\Documents and Settings\qpsadmin\My Documents\Downloads\2x-v10b-1300166062-nvf
lash>.\nvflash.exe --bct E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8
.bct --setbct --odmdata 0xC8000 --configfile android_fastboot_emmc_full.cfg --cr
eate --bl fastboot.bin --go
Nvflash started
rcm version 0X20001
System Information:
   chip name: unknown
   chip id: 0x20 major: 1 minor: 3
   chip sku: 0xf
   chip uid: 0x028841c844803617
   macrovision: disabled
   hdcp: enabled
   sbk burned: false
   dk burned: false
   boot device: emmc
   operating mode: 3
   device config strap: 0
   device config fuse: 17
   sdram config strap: 0

sending file: E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct
- 4080/4080 bytes sent
E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct sent successfully
odm data: 0xc8000
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader failed NvError 0x0
command failure: bootloader download failed

At that point the sccrren goes to the "S/W Upgrade Please wait while upgrading..." screen (but not dim) and does nothing.

I've tried about 7 times now, nothing seems to work.

Does anyone have any ideas? I'm stumped.

Thanks

[Michael Witt]

Hello ,

i have this problem too !!!!

I don´t know what is the problem.

Have anyone a link to this file "nvflash 2x-v10b-1301920892"  ???

Maybee this file works better !

Thanks

sry for my english

Edited by Michael Witt, 25 April 2012 - 12:08 PM.

[anguscc]

Sorry wrong thread!

Edited by anguscc, 01 May 2012 - 03:46 PM.

[japmsn]

Hi guys, one question, could I use this to revive a bricked phone which cannot enter into recovery nor be flashed with smartflash?

Thanks.

-edit-

I fixed my problem nvflashing CWM with Rusty!'s script from here:
http://forum.xda-dev...74#post26848274

Thanks anyways.

Edited by japmsn, 01 June 2012 - 04:49 PM.

[hamedd2000]

during install nvflash driver i get this error:
"This installation method is not supported by the selected INF file"
i have install it manually, but i have "exclamation mark" on device manager

[balamasti]

I am having Tmobile G2x phone and was following the youtube video below to install CynogenMod.



But at the step of clicking OneClickRecoveryFlasher.exe that step was failing and how many ever times I tried it did not popped the Android loop image. Then after a search I found this link.

I followed the steps mentioned here but after clicking "Flash.bat" and everything ran successfully in command prompt, after that my screen gone blank.

Please help me how should atleast go back to my previous original Tmobile version.

I really appreciate your help.