5246 replies to this topic

[quarkbaer]

hi togehter,

first of all many thanks for all the work you developers do. most things work fine only a few things i discovered till now.

1.) when i use cisco any connect client rootet (that one from the market) i get a message that no tap device is installen. what can i do here?

2.) when i try to create a account mith the microsoft settings i have the problem to save my settings.
when i am connectet to a internetconnection wifi or g3-data i only am able to type in my email and my password but i have no chance to correct any other setting
when i am not connectet i can type in the other information (username and mailserveradress but i cant save these settings.
Any helping advice?

Thanks for your help in advance

[haymant]

I copied all files from froyo_b3 to my storage, and boot froyo again, the usb is working
but then, the time is not synced, even after trying 3g/airplanmode on/off

wifi is also not stable now.

Before today, I installed b2 to sd card and updated to b3, everything is perfect.

After I heard that to install to my storage make froyo faster, met problems

haymant, on 21 October 2011 - 06:26 AM, said:

Hi, eknohr
did you change anything to make the usb work?
I manually installed b3 to my storage, and the usb does not work now

What I did:
1. parted my storage to
a. mmcblk1p1 fat32 4G
b. mmcblk1p5 ext4 4G
c. mmcblk1p6 swap 128M

2. tar xvzf ext4.tar.gz to mmcblk1p5
3. cp haret.ext and startup.txt to mmcblk1p1
   the startup.txt is from the b2 manual install package (root changed to mcblk1p5)

Edited by haymant, 21 October 2011 - 07:57 AM.

[ASIDER]

voyteckst, on 21 October 2011 - 07:19 AM, said:

My Storage installer (TESTING)

Please test it (You have to remove SD card before install) and let me know if it's working or not with private message (include very detailed configuration and messages).

Don't blame me if You loose Your data! If You have hidden recovery partition. it will delete it.

lauched thanks :rolleyes:

[erikcas]

voyteckst, on 21 October 2011 - 07:19 AM, said:

My Storage installer (TESTING)

Please test it (You have to remove SD card before install) and let me know if it's working or not with private message (include very detailed configuration and messages).

Don't blame me if You loose Your data! If You have hidden recovery partition. it will delete it.

Will test and report back later today.

[Alter88]

voyteckst, on 21 October 2011 - 07:19 AM, said:

My Storage installer (TESTING)

Please test it (You have to remove SD card before install) and let me know if it's working or not with private message (include very detailed configuration and messages).

Don't blame me if You loose Your data! If You have hidden recovery partition. it will delete it.

Tested this and sent findings to voyteckst.

[kenzoo]

andylau, on 21 October 2011 - 04:22 AM, said:

init.rc is just in the root of the ext4 partition

ps: reboot from recovery don't need return to wm, it just like boot into android again which will free more ram, this is so perfect

Again can someone confirm on this?

[lotuxete]

carlospaco, on 21 October 2011 - 06:25 AM, said:

Hello Antonio,
How did you install, wich partitions have you make into my storage?
Let is know.

Hi,


I have the O2 partitions just like the first day, in the same order and #id, even the Cubic (hidden) partition. I did a successful manual installation with swap partition. See attach file for more details.

My startup > Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p2 init=/init ..... etc.

My swap > /dev/block/mmcblk1p3 swap swap defaults 0 0

It's OBVIOUSLY that each one has a different partition sort, so startup.txt, init.rc and fstab are provably different in each O2. Everyone have to modify his own files according to his own configuration.

BEFORE parted under Ubuntu make a backup of your Internal memory files (just copy and paste anywhere), just in case... I've lost my Internal Storage several times and backups helped me, LOL.

Good luck.

Attached Files

•  partitions.png   60.91K   96 downloads

[voyteckst]

OK, don't test it for now. I know what is messed up (probably).

[wlw6600]

My storage have been departed to 2 logic partitions before I tested,
the result is not success,
"Fat32 partition new size:-136
checking partition /dev/block/mmcblk05....
...
Open:No such device or address."

[wlw6600]

wlw6600, on 21 October 2011 - 09:21 AM, said:

My storage have been departed to 2 logic partitions before I tested,
the result is not success,
"Fat32 partition new size:-136
checking partition /dev/block/mmcblk05....
...
Open:No such device or address."

when restart it, The wm call attention to format my storage for to read it.but nothing,I have been copy my files to PC  for test B3 on this days .

[voyteckst]

wlw6600, on 21 October 2011 - 09:27 AM, said:

when restart it, The wm call attention to format my storage for to read it.but nothing,I have been copy my files to PC  for test B3 on this days .

Thanks, I now now what is wrong.

[wlw6600]

voyteckst, on 21 October 2011 - 09:37 AM, said:

Thanks, I now now what is wrong.

I was't read you attention for don't test it .......
Good luck !

[skunk 01]

Hoe to create a swap partition in the Internal storage ? the ones i've create in the SD is too slow.

[pessoa]

Hi everyone!

I was away and lost the launch of beta3, now, I'm going to install it trying to make an update from my beta2 installation... But, I have a question:

Reading the post, some ppl said that to do that update to Internal Memory would be just unzip frb2update to root and copy zImage to My Storage. Is this correct?

And, second, I was trying to use a swap partition on beta2 so my Internal Memory already have a swap partition, my question is: Will beta3 use the swap automatic or is there something I need to configure first?

Thanks for everything devs!
Congrats!

[erikcas]

Question for the devs
Will latest kernelsource be published on short term?
It is not my intention to put pressure on anything, and I am not in a hurry but B7610 community is screaming my ears off. They (and me) want to enjoy the improvements of the latest kernelsoures.

Thanx!

[marisaleh]

Devs Please help,

I have realised that when I purchased my O2, I purchased
the 2G model. I know there is also 8G models.

My question is, will I still be able to install to My Storage with
a 2G model of O2. Will there be enough memory for all
these partitions.

Thanks

[eskyo]

marisaleh, on 21 October 2011 - 10:25 AM, said:

Devs Please help,

I have realised that when I purchased my O2, I purchased
the 2G model. I know there is also 8G models.

My question is, will I still be able to install to My Storage with
a 2G model of O2. Will there be enough memory for all
these partitions.

Thanks

i've got a 1gb partirion for android and 500mb for winmo,  and I think it's enought

[voyteckst]

erikcas, on 21 October 2011 - 10:01 AM, said:

Question for the devs
Will latest kernelsource be published on short term?
It is not my intention to put pressure on anything, and I am not in a hurry but B7610 community is screaming my ears off. They (and me) want to enjoy the improvements of the latest kernelsoures.

Thanx!

It should be in few minutes ;-)

[ASIDER]

interesting !
i used b2 z image pink one
now free ram 80 mb and no mobile heat

[xcavs]

voyteckst, on 21 October 2011 - 05:10 AM, said:

For those having original partition layout on internal storage, please send me output from parted /dev/device_name(eg. sdc) print

Here is mine..

Model:   (scsi)
Disk /dev/sdc: 8221MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End Size    Type      File system  Flags
1      512B    8221MB  8221MB  extended
5      1024B   7684MB  7684MB  logical   fat32
6      7684MB  8221MB  537MB   logical

Model: Unknown (unknown)
Disk /dev/sdc5: 7684MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start  End  Size  Type  File system  Flags

Model: Unknown (unknown)
Disk /dev/sdc6: 537MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start  End  Size  Type  File system  Flags
Hope that will help you.

Edited by xcavs, 21 October 2011 - 10:57 AM.