285 replies to this topic

[Uncharitable]

Seems like it works nice...

[Michaelwave]

Tested latest kernel on CFX2 16/09 build, and I noticed that the processor speed is always stuck on max frequency no matter which governor I choose. Is anyone facing this issue too?

EDIT: Problem solved! After going into deep sleep, the frequency is fluctuating again.

Edited by Michaelwave, 09 October 2012 - 10:54 AM.

[WiiSky70]

So any news on S4 Kernel development C3C0 ?

[droidbittin]

Will try to install S4 now

[C3C0]

Kernels updated

Changelog 21/10/2012
- CPU Governors revised
--- fixed Lagfree not scaling below 480MHz
--- fixed conservative stuck at max. frequency
--- fixed SavagedZen not ramping higher than 480MHz
--- ondemand parameters changed to match those ZTE is using in stock ROMs
--- new governor: SmartassH3 - based on SmartassV2 with parameters tuned by H3ROS (thanks) -
more efficient frequency scaling - not ramping too high when not needed this could potentially
result in better battery life
- added compatibility hack for some newer TRULY replacement LCDs
- default governor set to SmartassH3 with default min. frequency 122MHz

[plegdroid]

 C3C0, on 21 October 2012 - 04:35 PM, said:

Kernels updated

Changelog 21/10/2012
- CPU Governors revised
--- fixed Lagfree not scaling below 480MHz
--- fixed conservative stuck at max. frequency
--- fixed SavagedZen not ramping higher than 480MHz
--- ondemand parameters changed to match those ZTE is using in stock ROMs
--- new governor: SmartassH3 - based on SmartassV2 with parameters tuned by H3ROS (thanks) -
more efficient frequency scaling - not ramping too high when not needed this could potentially
result in better battery life
- added compatibility hack for some newer TRULY replacement LCDs
- default governor set to SmartassH3 with default min. frequency 122MHz

Thank you, S4  working a treat with the truly display.


additional, can verify s3 ics kernel also working with the truly display.

Edited by plegdroid, 28 October 2012 - 09:16 AM.

[mi nombre]

C3CO what governor do you recommend now that lagfree is fixed
Lagfree or SmartassV2?

[creedence]

@ C3C0.
Hats off! S4 kernel works perfectly. I'm testing now the smartassH3. I'm curious. Thank you.

[creedence]

I think that is savagedZen a gentle setting.

[gacama]

Having problems with proximity sensor with newest kernerls, flashed the new build of CM7.2 proximity sensor doesn't work, flashed proxy_update2.zip (it always worked for me)  but nothing, flashed proxy_update.zip but nothing too, any ideas?

[C3C0]

When I was testing the latest cm7.2, prox sensor worked. But I had to calibrate twice. First calibration failed although it said that the sensor was calibrated successfully. May happen sometimes. Nothing was changed regarding prox sensors in the latest kernels.

[gacama]

Nope, no matter how many times calibrate, doesn't work, I have curiosity to test smartassh3,so I keep it a few days and restore my nand of previous CM7.2

[razzmataz1478]

C3C0, I just tried to build recovery and ROM using your kernel and it came up with something like (I can't remember exactly):

make: *** [TARGET_KERNEL_BINARIES]: Error 2. Stop.

are you familiar with this?

Full: http://pastebin.com/Xm8wa04x

Edited by razzmataz1478, 04 November 2012 - 10:21 PM.

[creedence]

Official CM7. Kernel of C3CO. YEAH!

 uploadfromtaptalk1352074119920.jpg   59.32K   58 downloads

[razzmataz1478]

ok, i just got this error again and I think I've found the problem. But I don't know how to solve it.
In drivers/input/touchscreen/ft5x0x_ts_fwup.c, it can't find

#endif
#elif defined (CONFIG_MACH_RACER2)
#include "Ver17_20110721_028_P728T_app.i"
#elif defined (CONFIG_MACH_SKATE)
#include "Ver11_20110808_043_9485_skate_app.i"
#else
#endif

#include "Ver11_20110808_043_9485_skate_app.i"

Help?

[thomcd]

I'm no expert, but I remembered that C3C0 included drivers for other touchscreens in his S kernel so I think you will have to try and compile a version with a older version of C3C0's kernel.

[C3C0]

Hmm... I never had these kind of errors. Sorry for not following the forum more carefully lately. Playing with galaxy tab 7 plus. : D

[razzmataz1478]

 C3C0, on 06 November 2012 - 07:01 PM, said:

Hmm... I never had these kind of errors. Sorry for not following the forum more carefully lately. Playing with galaxy tab 7 plus. : D

Ah. Ok, I'll switch to Lalit's kernel for now and hope this fixes itself!

And Galaxy Tab +, Is that the same as the Tab 2 but a different name for a different market?

[omegavesko]

 razzmataz1478, on 06 November 2012 - 08:21 PM, said:

Ah. Ok, I'll switch to Lalit's kernel for now and hope this fixes itself!

And Galaxy Tab +, Is that the same as the Tab 2 but a different name for a different market?

http://www.gsmarena....0_plus-4208.php

GSMArena says it's for the German market.

[C3C0]

That's it. It's not mine though. My company gave it to me to test my work project on it... Quite a nice piece of hardware.